fixing line endings, removing PA08 PA09 from pins

Core/Src/main.c

@@ -379,10 +379,10 @@ static void MX_GPIO_Init(void)
   __HAL_RCC_GPIOB_CLK_ENABLE();
 
   /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOA, m1_dir_Pin|m2_dir_Pin|GPIO_PIN_8|GPIO_PIN_9, GPIO_PIN_RESET);
+  HAL_GPIO_WritePin(GPIOA, m1_dir_Pin|m2_dir_Pin, GPIO_PIN_RESET);
 
-  /*Configure GPIO pins : m1_dir_Pin m2_dir_Pin PA8 PA9 */
+  /*Configure GPIO pins : m1_dir_Pin m2_dir_Pin */
-  GPIO_InitStruct.Pin = m1_dir_Pin|m2_dir_Pin|GPIO_PIN_8|GPIO_PIN_9;
+  GPIO_InitStruct.Pin = m1_dir_Pin|m2_dir_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;

Makefile

@@ -1,5 +1,5 @@
 ##########################################################################################################################
-# File automatically-generated by tool: [projectgenerator] version: [3.16.0] date: [Wed Apr 06 17:16:57 CDT 2022] 
+# File automatically-generated by tool: [projectgenerator] version: [3.16.0] date: [Wed Apr 06 17:40:48 CDT 2022] 
 ##########################################################################################################################
 
 # ------------------------------------------------

motor_controller.ioc

@@ -15,23 +15,21 @@ Mcu.Name=STM32L432K(B-C)Ux
 Mcu.Package=UFQFPN32
 Mcu.Pin0=PC14-OSC32_IN (PC14)
 Mcu.Pin1=PC15-OSC32_OUT (PC15)
-Mcu.Pin10=PA13 (JTMS-SWDIO)
+Mcu.Pin10=PA15 (JTDI)
-Mcu.Pin11=PA14 (JTCK-SWCLK)
+Mcu.Pin11=PB3 (JTDO-TRACESWO)
-Mcu.Pin12=PA15 (JTDI)
+Mcu.Pin12=PB6
-Mcu.Pin13=PB3 (JTDO-TRACESWO)
+Mcu.Pin13=PB7
-Mcu.Pin14=PB6
+Mcu.Pin14=VP_SYS_VS_Systick
-Mcu.Pin15=PB7
+Mcu.Pin15=VP_TIM6_VS_ClockSourceINT
-Mcu.Pin16=VP_SYS_VS_Systick
-Mcu.Pin17=VP_TIM6_VS_ClockSourceINT
 Mcu.Pin2=PA0
 Mcu.Pin3=PA1
 Mcu.Pin4=PA2
 Mcu.Pin5=PA3
 Mcu.Pin6=PA4
 Mcu.Pin7=PA5
-Mcu.Pin8=PA8
+Mcu.Pin8=PA13 (JTMS-SWDIO)
-Mcu.Pin9=PA9
+Mcu.Pin9=PA14 (JTCK-SWCLK)
-Mcu.PinsNb=18
+Mcu.PinsNb=16
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32L432KCUx
@@ -85,10 +83,6 @@ PA5.GPIOParameters=GPIO_Label
 PA5.GPIO_Label=m2_dir
 PA5.Locked=true
 PA5.Signal=GPIO_Output
-PA8.Locked=true
-PA8.Signal=GPIO_Output
-PA9.Locked=true
-PA9.Signal=GPIO_Output
 PB3\ (JTDO-TRACESWO).Locked=true
 PB3\ (JTDO-TRACESWO).Mode=Hardware Flow Control (RS485)
 PB3\ (JTDO-TRACESWO).Signal=USART1_DE
@@ -131,7 +125,7 @@ ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=Makefile
 ProjectManager.ToolChainLocation=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_TIM2_Init-TIM2-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_TIM6_Init-TIM6-false-HAL-true
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_TIM2_Init-TIM2-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_TIM6_Init-TIM6-false-HAL-true,6-MX_USART1_UART_Init-USART1-false-HAL-true
 RCC.48CLKFreq_Value=24000000
 RCC.AHBFreq_Value=32000000
 RCC.APB1Freq_Value=32000000