Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.
 
 
 
 
Penguin 3fe04e7ed9 actually testing e54 driver core stuff now 2 anos atrás
arch actually testing e54 driver core stuff now 2 anos atrás
manifest migrating again? not sure why this didn't go through 2 anos atrás
scripts working on core module for same54 3 anos atrás
.gitignore trimming 2 anos atrás
.gitmodules removing toolchains for the foreseeable future 2 anos atrás
README.md updated readme again 2 anos atrás
notes.txt tiny changes. d21j18a compiles and runs. Note the differences in some of the register definitions from Microchip packs... 2 anos atrás

README.md

ePenguin Software Framework

Overview

This only works for x86_64 linux machines atm. Windows development is in progress. I have no idea how to go about testing for mac so... yeah.

As of right now, only the new command works. Everything else is not implemented yet. However, new does most of the heavy lifting so the other commands will come quickly once it is finished and polished.

Prerequisites

You need the following things installed for igloo+eSF to work properly:

  • openocd
  • rust (nightly preferred becuase it's just better)
  • toolchains (more below)

In the future, these things will just be bundled with eSF. The problem with some toolchains is dependency matching for various distros.

Update on Toolchains: The toolchains were a pain to maintain, and still are. That's why for the time being, the toolchains will not be bundled with esf. It is a goal to get the toolchains bundled with esf, but development of the esf libraries are most important right now.

Toolchains

Loose naming convention for toolchains:
<arch>-<vendor>-<target os>-<host os>-<abi>

  • arm-none-eabi:

    • Toolchain targetting the embedded ABI for arm

    • Debian/Ubuntu:
      sudo apt-get install gcc-arm-none-eabi binutils-arm-none-eabi gdb-arm-none-eabi

    • NOTE: If you run into an issue when running arm-none-eabi-gdb where it needs libncurses.so.5 on Ubuntu/Debian, install this package:
      sudo apt-get install libncurses5

    • Arch:
      sudo pacman -S arm-none-eabi-binutils arm-none-eabi-gcc arm-none-eabi-gdb arm-none-eabi-newlib

    • Gentoo:

      • See this wiki here.
  • avr-*

    • Ubuntu/Debian: (To be added)

    • Arch:
      sudo pacman -S avr-binutils avr-gcc avr-gdb avr-libc avrdude

    • Gentoo:

      • Install via crossdev:
        crossdev -s4 --stable --portage --verbose --target avr

OpenOCD

It is recommended that you download the zip here: https://github.com/xpack-dev-tools/openocd-xpack/releases

Otherwise, you can install it from your package manager:

Arch

sudo pacman -S openocd

Debian/Ubuntu

sudo apt install openocd

Gentoo

sudo emerge -a openocd

Rustlang

Doesn't get any easier than this: https://www.rust-lang.org/tools/install

If you're on gentoo, I recommend using rust-bin. You likely don't need these instructions, but here they are just in case.

Instructions for testing

WARNING: DO NOT COPY AND PASTE THESE INSTRUCTIONS. READ THROUGH THEM.

cd ~

# get igloo + esf
git clone https://git.epenguin.net/ePenguin/ePenguin-Software-Framework.git
git clone https://git.epenguin.net/ePenguin/ePenguin-Igloo.git

chmod -R u+x ~/ePenguin-Software-Framework/
chmod -R u+x ~/ePenguin-Igloo/
export ESF_DIR=~/ePenguin-Software-Framework

alias igloo_rls=~/ePenguin-Igloo/target/release/igloo
alias igloo_dbg=~/ePenguin-Igloo/target/debug/igloo
alias igloo=igloo_dbg

# Building
cd ~/ePenguin-Igloo

# Debug build is default
cargo build

# For release build
# cargo build --release

igloo

You should see a help menu thrown at you for more instruction.

I've aliased igloo_dbg for igloo, but you can use the release version if you want better performance and faster compile times. It is highly recommended to use the debug version right now, though.

Generating a new project

igloo new <project_name> --target=<mcu>
# Example
igloo new testproject --target=samd21j18a

Instructions for building

The framework comes with compilers so no external dependencies are needed. There are unfortunately no libraries yet because I want to nail igloo, the project manager, with certainty first.

cd <project_name>/.igloo/target/
make

Instructions for running

I'm not including these steps because openocd releases vary with target configs. I recommend you download a release from https://openocd.org and unzip it there. Downloading via a package manager almost guarantees you're going to be missing target scripts.

At some point in the future, I'm going to fork openocd just so I can make sure default board config scripts are 100% available because right now it's really hit or miss on various distros.

for the e54 xplained

openocd -f board/atmel_same54_xplained_pro.cfg

for the d21 xplained

openocd -f board/atmel_samd21_xplained_pro.cfg

If the E54 xplained cfg isn't found for some reason, try this:

echo "
#
# Atmel SAME54 Xplained Pro evaluation kit.
#

source [find interface/cmsis-dap.cfg]
transport select swd
# chip name
set CHIPNAME same54p20a
source [find target/atsame5x.cfg]
" > same54.cfg

openocd -f same54.cfg

Now in another terminal:

cd <project_dir>/igloo/targets/same54p20a/
make
arm-none-eabi-gdb -iex "target extended-remote localhost:3333" testdir.elf
load
monitor reset

If you're using gdb with python extensions then use this instead

arm-none-eabi-gdb -iex "target extended-remote localhost:3333" testdir.elf

Supported Targets

The framework allows me to add support for mcus pretty rapidly. I can add entire families of mcus with a few lines in the manifests. For now I've added support for mcus I use, but I'll be adding support for every Microchip SAM mcu shortly, as well as SiFive MCUs and STM32 MCUs.

Status Guide

Icon Description
In Development
Unstable
Experimental
Stable

ARM32

MCU Series Status
SAMD21A
SAME54A
SAME70A

AVR

MCU Series Status
XMEGAA
MEGA