You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
342 lines
9.9 KiB
C
342 lines
9.9 KiB
C
/* Auto-generated config file hpl_rtc_config.h */
|
|
#ifndef HPL_RTC_CONFIG_H
|
|
#define HPL_RTC_CONFIG_H
|
|
|
|
// <<< Use Configuration Wizard in Context Menu >>>
|
|
|
|
// <h> Basic settings
|
|
|
|
#ifndef CONF_RTC_ENABLE
|
|
#define CONF_RTC_ENABLE 1
|
|
#endif
|
|
|
|
// <q> Force reset RTC on initialization
|
|
// <i> Force RTC to reset on initialization.
|
|
// <i> Note that the previous power down data in RTC is lost if it's enabled.
|
|
// <id> rtc_arch_init_reset
|
|
#ifndef CONF_RTC_INIT_RESET
|
|
#define CONF_RTC_INIT_RESET 1
|
|
#endif
|
|
|
|
// <o> Prescaler configuration
|
|
// <0x0=>OFF(Peripheral clock divided by 1)
|
|
// <0x1=>Peripheral clock divided by 1
|
|
// <0x2=>Peripheral clock divided by 2
|
|
// <0x3=>Peripheral clock divided by 4
|
|
// <0x4=>Peripheral clock divided by 8
|
|
// <0x5=>Peripheral clock divided by 16
|
|
// <0x6=>Peripheral clock divided by 32
|
|
// <0x7=>Peripheral clock divided by 64
|
|
// <0x8=>Peripheral clock divided by 128
|
|
// <0x9=>Peripheral clock divided by 256
|
|
// <0xA=>Peripheral clock divided by 512
|
|
// <0xB=>Peripheral clock divided by 1024
|
|
// <i> These bits define the RTC clock relative to the peripheral clock
|
|
// <id> rtc_arch_prescaler
|
|
#ifndef CONF_RTC_PRESCALER
|
|
#define CONF_RTC_PRESCALER 0x0
|
|
|
|
#endif
|
|
|
|
// <o> Compare Value <1-4294967295>
|
|
// <i> These bits define the RTC Compare value, the ticks period is equal to reciprocal of (rtc clock/prescaler/compare value),
|
|
// <i> by default 1K clock input, 1 prescaler, 1 compare value, the ticks period equals to 1ms.
|
|
// <id> rtc_arch_comp_val
|
|
|
|
#ifndef CONF_RTC_COMP_VAL
|
|
|
|
#define CONF_RTC_COMP_VAL 32
|
|
|
|
#endif
|
|
|
|
// <e> RTC Tamper Input 0 settings
|
|
// <id> tamper_input_0_settings
|
|
#ifndef CONF_TAMPER_INPUT_0_SETTINGS
|
|
#define CONF_TAMPER_INPUT_0_SETTINGS 0
|
|
#endif
|
|
|
|
// <q> Tamper Level Settings
|
|
// <i> Indicates Tamper input 0 level
|
|
// <id> tamper_level_0
|
|
#ifndef CONF_RTC_TAMP_LVL_0
|
|
#define CONF_RTC_TAMP_LVL_0 0
|
|
#endif
|
|
|
|
// <o> RTC Tamper Input Action
|
|
// <0x0=>OFF(Disabled)
|
|
// <0x1=>Wake and Set Tamper Flag
|
|
// <0x2=>Capture Timestamp and Set Tamper Flag
|
|
// <0x3=>Active Layer Mode.IN and OUT pin is used.Timestamp is also captured.
|
|
// <i> These bits define the RTC Tamper Input Action to be performed
|
|
// <id> rtc_tamper_input_action_0
|
|
#ifndef CONF_RTC_TAMPER_INACT_0
|
|
#define CONF_RTC_TAMPER_INACT_0 0
|
|
#endif
|
|
|
|
// <q> Debounce Enable for Tamper Input
|
|
// <i> Indicates Debounce should be enabled for Tamper input 0
|
|
// <id> tamper_debounce_enable_0
|
|
#ifndef CONF_RTC_TAMP_DEBNC_0
|
|
#define CONF_RTC_TAMP_DEBNC_0 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> RTC Tamper Input 1 settings
|
|
// <id> tamper_input_1_settings
|
|
#ifndef CONF_TAMPER_INPUT_1_SETTINGS
|
|
#define CONF_TAMPER_INPUT_1_SETTINGS 0
|
|
#endif
|
|
|
|
// <q> Tamper Level Settings
|
|
// <i> Indicates Tamper input 1 level
|
|
// <id> tamper_level_1
|
|
#ifndef CONF_RTC_TAMP_LVL_1
|
|
#define CONF_RTC_TAMP_LVL_1 0
|
|
#endif
|
|
|
|
// <o> RTC Tamper Input Action
|
|
// <0x0=>OFF(Disabled)
|
|
// <0x1=>Wake and Set Tamper Flag
|
|
// <0x2=>Capture Timestamp and Set Tamper Flag
|
|
// <0x3=>Active Layer Mode.IN and OUT pin is used.Timestamp is also captured.
|
|
// <i> These bits define the RTC Tamper Input Action to be performed
|
|
// <id> rtc_tamper_input_action_1
|
|
#ifndef CONF_RTC_TAMPER_INACT_1
|
|
#define CONF_RTC_TAMPER_INACT_1 0
|
|
#endif
|
|
|
|
// <q> Debounce Enable for Tamper Input
|
|
// <i> Indicates Debounce should be enabled for Tamper input 1
|
|
// <id> tamper_debounce_enable_1
|
|
#ifndef CONF_RTC_TAMP_DEBNC_1
|
|
#define CONF_RTC_TAMP_DEBNC_1 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> RTC Tamper Input 2 settings
|
|
// <id> tamper_input_2_settings
|
|
#ifndef CONF_TAMPER_INPUT_2_SETTINGS
|
|
#define CONF_TAMPER_INPUT_2_SETTINGS 0
|
|
#endif
|
|
|
|
// <q> Tamper Level Settings
|
|
// <i> Indicates Tamper input 2 level
|
|
// <id> tamper_level_2
|
|
#ifndef CONF_RTC_TAMP_LVL_2
|
|
#define CONF_RTC_TAMP_LVL_2 0
|
|
#endif
|
|
|
|
// <o> RTC Tamper Input Action
|
|
// <0x0=>OFF(Disabled)
|
|
// <0x1=>Wake and Set Tamper Flag
|
|
// <0x2=>Capture Timestamp and Set Tamper Flag
|
|
// <0x3=>Active Layer Mode.IN and OUT pin is used.Timestamp is also captured.
|
|
// <i> These bits define the RTC Tamper Input Action to be performed
|
|
// <id> rtc_tamper_input_action_2
|
|
#ifndef CONF_RTC_TAMPER_INACT_2
|
|
#define CONF_RTC_TAMPER_INACT_2 0
|
|
#endif
|
|
|
|
// <q> Debounce Enable for Tamper Input
|
|
// <i> Indicates Debounce should be enabled for Tamper input 2
|
|
// <id> tamper_debounce_enable_2
|
|
#ifndef CONF_RTC_TAMP_DEBNC_2
|
|
#define CONF_RTC_TAMP_DEBNC_2 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> RTC Tamper Input 3 settings
|
|
// <id> tamper_input_3_settings
|
|
#ifndef CONF_TAMPER_INPUT_3_SETTINGS
|
|
#define CONF_TAMPER_INPUT_3_SETTINGS 0
|
|
#endif
|
|
|
|
// <q> Tamper Level Settings
|
|
// <i> Indicates Tamper input 3 level
|
|
// <id> tamper_level_3
|
|
#ifndef CONF_RTC_TAMP_LVL_3
|
|
#define CONF_RTC_TAMP_LVL_3 0
|
|
#endif
|
|
|
|
// <o> RTC Tamper Input Action
|
|
// <0x0=>OFF(Disabled)
|
|
// <0x1=>Wake and Set Tamper Flag
|
|
// <0x2=>Capture Timestamp and Set Tamper Flag
|
|
// <0x3=>Active Layer Mode.IN and OUT pin is used.Timestamp is also captured.
|
|
// <i> These bits define the RTC Tamper Input Action to be performed
|
|
// <id> rtc_tamper_input_action_3
|
|
#ifndef CONF_RTC_TAMPER_INACT_3
|
|
#define CONF_RTC_TAMPER_INACT_3 0
|
|
#endif
|
|
|
|
// <q> Debounce Enable for Tamper Input
|
|
// <i> Indicates Debounce should be enabled for Tamper input 3
|
|
// <id> tamper_debounce_enable_3
|
|
#ifndef CONF_RTC_TAMP_DEBNC_3
|
|
#define CONF_RTC_TAMP_DEBNC_3 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> RTC Tamper Input 4 settings
|
|
// <id> tamper_input_4_settings
|
|
#ifndef CONF_TAMPER_INPUT_4_SETTINGS
|
|
#define CONF_TAMPER_INPUT_4_SETTINGS 0
|
|
#endif
|
|
|
|
// <q> Tamper Level Settings
|
|
// <i> Indicates Tamper input 4 level
|
|
// <id> tamper_level_4
|
|
#ifndef CONF_RTC_TAMP_LVL_4
|
|
#define CONF_RTC_TAMP_LVL_4 0
|
|
#endif
|
|
|
|
// <o> RTC Tamper Input Action
|
|
// <0x0=>OFF(Disabled)
|
|
// <0x1=>Wake and Set Tamper Flag
|
|
// <0x2=>Capture Timestamp and Set Tamper Flag
|
|
// <0x3=>Active Layer Mode.IN and OUT pin is used.Timestamp is also captured.
|
|
// <i> These bits define the RTC Tamper Input Action to be performed
|
|
// <id> rtc_tamper_input_action_4
|
|
#ifndef CONF_RTC_TAMPER_INACT_4
|
|
#define CONF_RTC_TAMPER_INACT_4 0
|
|
#endif
|
|
|
|
// <q> Debounce Enable for Tamper Input
|
|
// <i> Indicates Debounce should be enabled for Tamper input 4
|
|
// <id> tamper_debounce_enable_4
|
|
#ifndef CONF_RTC_TAMP_DEBNC_4
|
|
#define CONF_RTC_TAMP_DEBNC_4 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <o> RTC Tamper Active Layer Frequency Prescalar
|
|
// <0x0=>DIV2 CLK_RTC_OUT is CLK_RTC /2
|
|
// <0x1=>DIV4 CLK_RTC_OUT is CLK_RTC /4
|
|
// <0x2=>DIV8 CLK_RTC_OUT is CLK_RTC /8
|
|
// <0x3=>DIV16 CLK_RTC_OUT is CLK_RTC /16
|
|
// <0x4=>DIV32 CLK_RTC_OUT is CLK_RTC /32
|
|
// <0x5=>DIV64 CLK_RTC_OUT is CLK_RTC /64
|
|
// <0x6=>DIV128 CLK_RTC_OUT is CLK_RTC /128
|
|
// <0x7=>DIV256 CLK_RTC_OUT is CLK_RTC /256
|
|
// <i> These bits define the RTC Tamper Active Layer Frequecny Prescalar
|
|
// <id> rtc_tamper_active_layer_frequency_prescalar
|
|
#ifndef CONF_RTC_TAMP_ACT_LAYER_FREQ_PRES
|
|
#define CONF_RTC_TAMP_ACT_LAYER_FREQ_PRES 0
|
|
#endif
|
|
|
|
// <o> RTC Tamper Debounce Frequency Prescalar
|
|
// <0x0=>DIV2 CLK_RTC_DEB is CLK_RTC /2
|
|
// <0x1=>DIV4 CLK_RTC_DEB is CLK_RTC /4
|
|
// <0x2=>DIV8 CLK_RTC_DEB is CLK_RTC /8
|
|
// <0x3=>DIV16 CLK_RTC_DEB is CLK_RTC /16
|
|
// <0x4=>DIV32 CLK_RTC_DEB is CLK_RTC /32
|
|
// <0x5=>DIV64 CLK_RTC_DEB is CLK_RTC /64
|
|
// <0x6=>DIV128 CLK_RTC_DEB is CLK_RTC /128
|
|
// <0x7=>DIV256 CLK_RTC_DEB is CLK_RTC /256
|
|
// <i> These bits define the RTC Debounce Frequency Prescalar
|
|
// <id> rtc_tamper_debounce_frequency_prescalar
|
|
#ifndef CONF_RTC_TAMP_DEBF_PRES
|
|
#define CONF_RTC_TAMP_DEBF_PRES 0
|
|
#endif
|
|
|
|
// <e> Event control
|
|
// <id> rtc_event_control
|
|
#ifndef CONF_RTC_EVENT_CONTROL_ENABLE
|
|
#define CONF_RTC_EVENT_CONTROL_ENABLE 0
|
|
#endif
|
|
|
|
// <q> Periodic Interval 0 Event Output
|
|
// <i> This bit indicates whether Periodic interval 0 event is enabled and will be generated
|
|
// <id> rtc_pereo0
|
|
#ifndef CONF_RTC_PEREO0
|
|
#define CONF_RTC_PEREO0 0
|
|
#endif
|
|
// <q> Periodic Interval 1 Event Output
|
|
// <i> This bit indicates whether Periodic interval 1 event is enabled and will be generated
|
|
// <id> rtc_pereo1
|
|
#ifndef CONF_RTC_PEREO1
|
|
#define CONF_RTC_PEREO1 0
|
|
#endif
|
|
// <q> Periodic Interval 2 Event Output
|
|
// <i> This bit indicates whether Periodic interval 2 event is enabled and will be generated
|
|
// <id> rtc_pereo2
|
|
#ifndef CONF_RTC_PEREO2
|
|
#define CONF_RTC_PEREO2 0
|
|
#endif
|
|
// <q> Periodic Interval 3 Event Output
|
|
// <i> This bit indicates whether Periodic interval 3 event is enabled and will be generated
|
|
// <id> rtc_pereo3
|
|
#ifndef CONF_RTC_PEREO3
|
|
#define CONF_RTC_PEREO3 0
|
|
#endif
|
|
// <q> Periodic Interval 4 Event Output
|
|
// <i> This bit indicates whether Periodic interval 4 event is enabled and will be generated
|
|
// <id> rtc_pereo4
|
|
#ifndef CONF_RTC_PEREO4
|
|
#define CONF_RTC_PEREO4 0
|
|
#endif
|
|
// <q> Periodic Interval 5 Event Output
|
|
// <i> This bit indicates whether Periodic interval 5 event is enabled and will be generated
|
|
// <id> rtc_pereo5
|
|
#ifndef CONF_RTC_PEREO5
|
|
#define CONF_RTC_PEREO5 0
|
|
#endif
|
|
// <q> Periodic Interval 6 Event Output
|
|
// <i> This bit indicates whether Periodic interval 6 event is enabled and will be generated
|
|
// <id> rtc_pereo6
|
|
#ifndef CONF_RTC_PEREO6
|
|
#define CONF_RTC_PEREO6 0
|
|
#endif
|
|
// <q> Periodic Interval 7 Event Output
|
|
// <i> This bit indicates whether Periodic interval 7 event is enabled and will be generated
|
|
// <id> rtc_pereo7
|
|
#ifndef CONF_RTC_PEREO7
|
|
#define CONF_RTC_PEREO7 0
|
|
#endif
|
|
|
|
// <q> Compare 0 Event Output
|
|
// <i> This bit indicates whether Compare O event is enabled and will be generated
|
|
// <id> rtc_cmpeo0
|
|
#ifndef CONF_RTC_COMPE0
|
|
#define CONF_RTC_COMPE0 0
|
|
#endif
|
|
|
|
// <q> Compare 1 Event Output
|
|
// <i> This bit indicates whether Compare 1 event is enabled and will be generated
|
|
// <id> rtc_cmpeo1
|
|
#ifndef CONF_RTC_COMPE1
|
|
#define CONF_RTC_COMPE1 0
|
|
#endif
|
|
// <q> Overflow Event Output
|
|
// <i> This bit indicates whether Overflow event is enabled and will be generated
|
|
// <id> rtc_ovfeo
|
|
#ifndef CONF_RTC_OVFEO
|
|
#define CONF_RTC_OVFEO 0
|
|
#endif
|
|
|
|
// <q> Tamper Event Output
|
|
// <i> This bit indicates whether Tamper event output is enabled and will be generated
|
|
// <id> rtc_tampereo
|
|
#ifndef CONF_RTC_TAMPEREO
|
|
#define CONF_RTC_TAMPEREO 0
|
|
#endif
|
|
|
|
// <q> Tamper Event Input
|
|
// <i> This bit indicates whether Tamper event input is enabled and will be generated
|
|
// <id> rtc_tampevei
|
|
#ifndef CONF_RTC_TAMPEVEI
|
|
#define CONF_RTC_TAMPEVEI 0
|
|
#endif
|
|
// </e>
|
|
|
|
// </h>
|
|
|
|
// <<< end of configuration section >>>
|
|
|
|
#endif // HPL_RTC_CONFIG_H
|