You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
279 lines
8.1 KiB
C
279 lines
8.1 KiB
C
/* Auto-generated config file hpl_sercom_config.h */
|
|
#ifndef HPL_SERCOM_CONFIG_H
|
|
#define HPL_SERCOM_CONFIG_H
|
|
|
|
// <<< Use Configuration Wizard in Context Menu >>>
|
|
|
|
#include <peripheral_clk_config.h>
|
|
|
|
#ifndef CONF_SERCOM_0_USART_ENABLE
|
|
#define CONF_SERCOM_0_USART_ENABLE 1
|
|
#endif
|
|
|
|
// <h> Basic Configuration
|
|
|
|
// <q> Receive buffer enable
|
|
// <i> Enable input buffer in SERCOM module
|
|
// <id> usart_rx_enable
|
|
#ifndef CONF_SERCOM_0_USART_RXEN
|
|
#define CONF_SERCOM_0_USART_RXEN 1
|
|
#endif
|
|
|
|
// <q> Transmitt buffer enable
|
|
// <i> Enable output buffer in SERCOM module
|
|
// <id> usart_tx_enable
|
|
#ifndef CONF_SERCOM_0_USART_TXEN
|
|
#define CONF_SERCOM_0_USART_TXEN 1
|
|
#endif
|
|
|
|
// <o> Frame parity
|
|
// <0x0=>No parity
|
|
// <0x1=>Even parity
|
|
// <0x2=>Odd parity
|
|
// <i> Parity bit mode for USART frame
|
|
// <id> usart_parity
|
|
#ifndef CONF_SERCOM_0_USART_PARITY
|
|
#define CONF_SERCOM_0_USART_PARITY 0x0
|
|
#endif
|
|
|
|
// <o> Character Size
|
|
// <0x0=>8 bits
|
|
// <0x1=>9 bits
|
|
// <0x5=>5 bits
|
|
// <0x6=>6 bits
|
|
// <0x7=>7 bits
|
|
// <i> Data character size in USART frame
|
|
// <id> usart_character_size
|
|
#ifndef CONF_SERCOM_0_USART_CHSIZE
|
|
#define CONF_SERCOM_0_USART_CHSIZE 0x0
|
|
#endif
|
|
|
|
// <o> Stop Bit
|
|
// <0=>One stop bit
|
|
// <1=>Two stop bits
|
|
// <i> Number of stop bits in USART frame
|
|
// <id> usart_stop_bit
|
|
#ifndef CONF_SERCOM_0_USART_SBMODE
|
|
#define CONF_SERCOM_0_USART_SBMODE 0
|
|
#endif
|
|
|
|
// <o> Baud rate <1-6250000>
|
|
// <i> USART baud rate setting
|
|
// <id> usart_baud_rate
|
|
#ifndef CONF_SERCOM_0_USART_BAUD
|
|
#define CONF_SERCOM_0_USART_BAUD 9600
|
|
#endif
|
|
|
|
// </h>
|
|
|
|
// <e> Advanced configuration
|
|
// <id> usart_advanced
|
|
#ifndef CONF_SERCOM_0_USART_ADVANCED_CONFIG
|
|
#define CONF_SERCOM_0_USART_ADVANCED_CONFIG 0
|
|
#endif
|
|
|
|
// <q> Run in stand-by
|
|
// <i> Keep the module running in standby sleep mode
|
|
// <id> usart_arch_runstdby
|
|
#ifndef CONF_SERCOM_0_USART_RUNSTDBY
|
|
#define CONF_SERCOM_0_USART_RUNSTDBY 0
|
|
#endif
|
|
|
|
// <q> Immediate Buffer Overflow Notification
|
|
// <i> Controls when the BUFOVF status bit is asserted
|
|
// <id> usart_arch_ibon
|
|
#ifndef CONF_SERCOM_0_USART_IBON
|
|
#define CONF_SERCOM_0_USART_IBON 0
|
|
#endif
|
|
|
|
// <q> Start of Frame Detection Enable
|
|
// <i> Will wake the device from any sleep mode if usart_init and usart_enable was run priort to going to sleep. (receive buffer must be enabled)
|
|
// <id> usart_arch_sfde
|
|
#ifndef CONF_SERCOM_0_USART_SFDE
|
|
#define CONF_SERCOM_0_USART_SFDE 0
|
|
#endif
|
|
|
|
// <q> Collision Detection Enable
|
|
// <i> Collision detection enable
|
|
// <id> usart_arch_cloden
|
|
#ifndef CONF_SERCOM_0_USART_CLODEN
|
|
#define CONF_SERCOM_0_USART_CLODEN 0
|
|
#endif
|
|
|
|
// <o> Operating Mode
|
|
// <0x0=>USART with external clock
|
|
// <0x1=>USART with internal clock
|
|
// <i> Drive the shift register by an internal clock generated by the baud rate generator or an external clock supplied on the XCK pin.
|
|
// <id> usart_arch_clock_mode
|
|
#ifndef CONF_SERCOM_0_USART_MODE
|
|
#define CONF_SERCOM_0_USART_MODE 0x1
|
|
#endif
|
|
|
|
// <o> Sample Rate
|
|
// <0x0=>16x arithmetic
|
|
// <0x1=>16x fractional
|
|
// <0x2=>8x arithmetic
|
|
// <0x3=>8x fractional
|
|
// <0x4=>3x arithmetic
|
|
// <i> How many over-sampling bits used when sampling data state
|
|
// <id> usart_arch_sampr
|
|
#ifndef CONF_SERCOM_0_USART_SAMPR
|
|
#define CONF_SERCOM_0_USART_SAMPR 0x0
|
|
#endif
|
|
|
|
// <o> Sample Adjustment
|
|
// <0x0=>7-8-9 (3-4-5 8-bit over-sampling)
|
|
// <0x1=>9-10-11 (4-5-6 8-bit over-sampling)
|
|
// <0x2=>11-12-13 (5-6-7 8-bit over-sampling)
|
|
// <0x3=>13-14-15 (6-7-8 8-bit over-sampling)
|
|
// <i> Adjust which samples to use for data sampling in asynchronous mode
|
|
// <id> usart_arch_sampa
|
|
#ifndef CONF_SERCOM_0_USART_SAMPA
|
|
#define CONF_SERCOM_0_USART_SAMPA 0x0
|
|
#endif
|
|
|
|
// <o> Fractional Part <0-7>
|
|
// <i> Fractional part of the baud rate if baud rate generator is in fractional mode
|
|
// <id> usart_arch_fractional
|
|
#ifndef CONF_SERCOM_0_USART_FRACTIONAL
|
|
#define CONF_SERCOM_0_USART_FRACTIONAL 0x0
|
|
#endif
|
|
|
|
// <o> Data Order
|
|
// <0=>MSB is transmitted first
|
|
// <1=>LSB is transmitted first
|
|
// <i> Data order of the data bits in the frame
|
|
// <id> usart_arch_dord
|
|
#ifndef CONF_SERCOM_0_USART_DORD
|
|
#define CONF_SERCOM_0_USART_DORD 1
|
|
#endif
|
|
|
|
// Does not do anything in UART mode
|
|
#define CONF_SERCOM_0_USART_CPOL 0
|
|
|
|
// <o> Encoding Format
|
|
// <0=>No encoding
|
|
// <1=>IrDA encoded
|
|
// <id> usart_arch_enc
|
|
#ifndef CONF_SERCOM_0_USART_ENC
|
|
#define CONF_SERCOM_0_USART_ENC 0
|
|
#endif
|
|
|
|
// <o> LIN Slave Enable
|
|
// <i> Break Character Detection and Auto-Baud/LIN Slave Enable.
|
|
// <i> Additional setting needed: 16x sample rate using fractional baud rate generation (CTRLA.SAMPR = 1).
|
|
// <0=>Disable
|
|
// <1=>Enable
|
|
// <id> usart_arch_lin_slave_enable
|
|
#ifndef CONF_SERCOM_0_USART_LIN_SLAVE_ENABLE
|
|
#define CONF_SERCOM_0_USART_LIN_SLAVE_ENABLE 0
|
|
#endif
|
|
|
|
// <o> Debug Stop Mode
|
|
// <i> Behavior of the baud-rate generator when CPU is halted by external debugger.
|
|
// <0=>Keep running
|
|
// <1=>Halt
|
|
// <id> usart_arch_dbgstop
|
|
#ifndef CONF_SERCOM_0_USART_DEBUG_STOP_MODE
|
|
#define CONF_SERCOM_0_USART_DEBUG_STOP_MODE 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
#ifndef CONF_SERCOM_0_USART_INACK
|
|
#define CONF_SERCOM_0_USART_INACK 0x0
|
|
#endif
|
|
|
|
#ifndef CONF_SERCOM_0_USART_DSNACK
|
|
#define CONF_SERCOM_0_USART_DSNACK 0x0
|
|
#endif
|
|
|
|
#ifndef CONF_SERCOM_0_USART_MAXITER
|
|
#define CONF_SERCOM_0_USART_MAXITER 0x7
|
|
#endif
|
|
|
|
#ifndef CONF_SERCOM_0_USART_GTIME
|
|
#define CONF_SERCOM_0_USART_GTIME 0x2
|
|
#endif
|
|
|
|
#define CONF_SERCOM_0_USART_RXINV 0x0
|
|
#define CONF_SERCOM_0_USART_TXINV 0x0
|
|
|
|
#ifndef CONF_SERCOM_0_USART_CMODE
|
|
#define CONF_SERCOM_0_USART_CMODE 0
|
|
#endif
|
|
|
|
#ifndef CONF_SERCOM_0_USART_RXPO
|
|
#define CONF_SERCOM_0_USART_RXPO 1 /* RX is on PIN_PA05 */
|
|
#endif
|
|
|
|
#ifndef CONF_SERCOM_0_USART_TXPO
|
|
#define CONF_SERCOM_0_USART_TXPO 0 /* TX is on PIN_PA04 */
|
|
#endif
|
|
|
|
/* Set correct parity settings in register interface based on PARITY setting */
|
|
#if CONF_SERCOM_0_USART_LIN_SLAVE_ENABLE == 1
|
|
#if CONF_SERCOM_0_USART_PARITY == 0
|
|
#define CONF_SERCOM_0_USART_PMODE 0
|
|
#define CONF_SERCOM_0_USART_FORM 4
|
|
#else
|
|
#define CONF_SERCOM_0_USART_PMODE CONF_SERCOM_0_USART_PARITY - 1
|
|
#define CONF_SERCOM_0_USART_FORM 5
|
|
#endif
|
|
#else /* #if CONF_SERCOM_0_USART_LIN_SLAVE_ENABLE == 0 */
|
|
#if CONF_SERCOM_0_USART_PARITY == 0
|
|
#define CONF_SERCOM_0_USART_PMODE 0
|
|
#define CONF_SERCOM_0_USART_FORM 0
|
|
#else
|
|
#define CONF_SERCOM_0_USART_PMODE CONF_SERCOM_0_USART_PARITY - 1
|
|
#define CONF_SERCOM_0_USART_FORM 1
|
|
#endif
|
|
#endif
|
|
|
|
// Calculate BAUD register value in UART mode
|
|
#if CONF_SERCOM_0_USART_SAMPR == 0
|
|
#ifndef CONF_SERCOM_0_USART_BAUD_RATE
|
|
#define CONF_SERCOM_0_USART_BAUD_RATE \
|
|
65536 - ((65536 * 16.0f * CONF_SERCOM_0_USART_BAUD) / CONF_GCLK_SERCOM0_CORE_FREQUENCY)
|
|
#endif
|
|
#ifndef CONF_SERCOM_0_USART_RECEIVE_PULSE_LENGTH
|
|
#define CONF_SERCOM_0_USART_RECEIVE_PULSE_LENGTH 0
|
|
#endif
|
|
#elif CONF_SERCOM_0_USART_SAMPR == 1
|
|
#ifndef CONF_SERCOM_0_USART_BAUD_RATE
|
|
#define CONF_SERCOM_0_USART_BAUD_RATE \
|
|
((CONF_GCLK_SERCOM0_CORE_FREQUENCY) / (CONF_SERCOM_0_USART_BAUD * 16)) - (CONF_SERCOM_0_USART_FRACTIONAL / 8)
|
|
#endif
|
|
#ifndef CONF_SERCOM_0_USART_RECEIVE_PULSE_LENGTH
|
|
#define CONF_SERCOM_0_USART_RECEIVE_PULSE_LENGTH 0
|
|
#endif
|
|
#elif CONF_SERCOM_0_USART_SAMPR == 2
|
|
#ifndef CONF_SERCOM_0_USART_BAUD_RATE
|
|
#define CONF_SERCOM_0_USART_BAUD_RATE \
|
|
65536 - ((65536 * 8.0f * CONF_SERCOM_0_USART_BAUD) / CONF_GCLK_SERCOM0_CORE_FREQUENCY)
|
|
#endif
|
|
#ifndef CONF_SERCOM_0_USART_RECEIVE_PULSE_LENGTH
|
|
#define CONF_SERCOM_0_USART_RECEIVE_PULSE_LENGTH 0
|
|
#endif
|
|
#elif CONF_SERCOM_0_USART_SAMPR == 3
|
|
#ifndef CONF_SERCOM_0_USART_BAUD_RATE
|
|
#define CONF_SERCOM_0_USART_BAUD_RATE \
|
|
((CONF_GCLK_SERCOM0_CORE_FREQUENCY) / (CONF_SERCOM_0_USART_BAUD * 8)) - (CONF_SERCOM_0_USART_FRACTIONAL / 8)
|
|
#endif
|
|
#ifndef CONF_SERCOM_0_USART_RECEIVE_PULSE_LENGTH
|
|
#define CONF_SERCOM_0_USART_RECEIVE_PULSE_LENGTH 0
|
|
#endif
|
|
#elif CONF_SERCOM_0_USART_SAMPR == 4
|
|
#ifndef CONF_SERCOM_0_USART_BAUD_RATE
|
|
#define CONF_SERCOM_0_USART_BAUD_RATE \
|
|
65536 - ((65536 * 3.0f * CONF_SERCOM_0_USART_BAUD) / CONF_GCLK_SERCOM0_CORE_FREQUENCY)
|
|
#endif
|
|
#ifndef CONF_SERCOM_0_USART_RECEIVE_PULSE_LENGTH
|
|
#define CONF_SERCOM_0_USART_RECEIVE_PULSE_LENGTH 0
|
|
#endif
|
|
#endif
|
|
|
|
// <<< end of configuration section >>>
|
|
|
|
#endif // HPL_SERCOM_CONFIG_H
|