You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.

194 lines
5.3 KiB
C

/**
* \file
*
* \brief PWM related functionality declaration.
*
* Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.
*
* \asf_license_start
*
* \page License
*
* Subject to your compliance with these terms, you may use Microchip
* software and any derivatives exclusively with Microchip products.
* It is your responsibility to comply with third party license terms applicable
* to your use of third party software (including open source software) that
* may accompany Microchip software.
*
* THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
* WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
* INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
* AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
* LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
* LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
* SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
* POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT
* ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
* RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
* THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
*
* \asf_license_stop
*
*/
#ifndef _HPL_PWM_H_INCLUDED
#define _HPL_PWM_H_INCLUDED
/**
* \addtogroup HPL PWM
*
* \section hpl_pwm_rev Revision History
* - v1.0.0 Initial Release
*
*@{
*/
#include <compiler.h>
#include "hpl_irq.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief PWM callback types
*/
enum _pwm_callback_type { PWM_DEVICE_PERIOD_CB, PWM_DEVICE_ERROR_CB };
/**
* \brief PWM pulse-width period
*/
typedef uint32_t pwm_period_t;
/**
* \brief PWM device structure
*
* The PWM device structure forward declaration.
*/
struct _pwm_device;
/**
* \brief PWM interrupt callbacks
*/
struct _pwm_callback {
void (*pwm_period_cb)(struct _pwm_device *device);
void (*pwm_error_cb)(struct _pwm_device *device);
};
/**
* \brief PWM descriptor device structure
*/
struct _pwm_device {
struct _pwm_callback callback;
struct _irq_descriptor irq;
void * hw;
};
/**
* \brief PWM functions, pointers to low-level functions
*/
struct _pwm_hpl_interface {
int32_t (*init)(struct _pwm_device *const device, void *const hw);
void (*deinit)(struct _pwm_device *const device);
void (*start_pwm)(struct _pwm_device *const device);
void (*stop_pwm)(struct _pwm_device *const device);
void (*set_pwm_param)(struct _pwm_device *const device, const pwm_period_t period, const pwm_period_t duty_cycle);
bool (*is_pwm_enabled)(const struct _pwm_device *const device);
pwm_period_t (*pwm_get_period)(const struct _pwm_device *const device);
uint32_t (*pwm_get_duty)(const struct _pwm_device *const device);
void (*set_irq_state)(struct _pwm_device *const device, const enum _pwm_callback_type type, const bool disable);
};
/**
* \brief Initialize TC
*
* This function does low level TC configuration.
*
* \param[in] device The pointer to PWM device instance
* \param[in] hw The pointer to hardware instance
*
* \return Initialization status.
*/
int32_t _pwm_init(struct _pwm_device *const device, void *const hw);
/**
* \brief Deinitialize TC
*
* \param[in] device The pointer to PWM device instance
*/
void _pwm_deinit(struct _pwm_device *const device);
/**
* \brief Retrieve offset of the given tc hardware instance
*
* \param[in] device The pointer to PWM device instance
*
* \return The offset of the given tc hardware instance
*/
uint8_t _pwm_get_hardware_offset(const struct _pwm_device *const device);
/**
* \brief Start hardware pwm
*
* \param[in] device The pointer to PWM device instance
*/
void _pwm_enable(struct _pwm_device *const device);
/**
* \brief Stop hardware pwm
*
* \param[in] device The pointer to PWM device instance
*/
void _pwm_disable(struct _pwm_device *const device);
/**
* \brief Set pwm parameter
*
* \param[in] device The pointer to PWM device instance
* \param[in] period Total period of one PWM cycle.
* \param[in] duty_cycle Period of PWM first half during one cycle.
*/
void _pwm_set_param(struct _pwm_device *const device, const pwm_period_t period, const pwm_period_t duty_cycle);
/**
* \brief Check if pwm is working
*
* \param[in] device The pointer to PWM device instance
*
* \return Check status.
* \retval true The given pwm is working
* \retval false The given pwm is not working
*/
bool _pwm_is_enabled(const struct _pwm_device *const device);
/**
* \brief Get pwm waveform period value
*
* \param[in] device The pointer to PWM device instance
*
* \return Period value.
*/
pwm_period_t _pwm_get_period(const struct _pwm_device *const device);
/**
* \brief Get pwm waveform duty cycle value
*
* \param[in] device The pointer to PWM device instance
*
* \return Duty cycle value
*/
uint32_t _pwm_get_duty(const struct _pwm_device *const device);
/**
* \brief Enable/disable PWM interrupt
*
* param[in] device The pointer to PWM device instance
* param[in] type The type of interrupt to disable/enable if applicable
* param[in] disable Enable or disable
*/
void _pwm_set_irq_state(struct _pwm_device *const device, const enum _pwm_callback_type type, const bool disable);
#ifdef __cplusplus
}
#endif
/**@}*/
#endif /* _HPL_PWM_H_INCLUDED */