You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.

73 lines
3.9 KiB
C

/**
* \file
*
* \brief Instance description for QSPI
*
* Copyright (c) 2019 Microchip Technology Inc.
*
* \asf_license_start
*
* \page License
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the Licence at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* \asf_license_stop
*
*/
#ifndef _SAME54_QSPI_INSTANCE_
#define _SAME54_QSPI_INSTANCE_
/* ========== Register definition for QSPI peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_QSPI_CTRLA (0x42003400) /**< \brief (QSPI) Control A */
#define REG_QSPI_CTRLB (0x42003404) /**< \brief (QSPI) Control B */
#define REG_QSPI_BAUD (0x42003408) /**< \brief (QSPI) Baud Rate */
#define REG_QSPI_RXDATA (0x4200340C) /**< \brief (QSPI) Receive Data */
#define REG_QSPI_TXDATA (0x42003410) /**< \brief (QSPI) Transmit Data */
#define REG_QSPI_INTENCLR (0x42003414) /**< \brief (QSPI) Interrupt Enable Clear */
#define REG_QSPI_INTENSET (0x42003418) /**< \brief (QSPI) Interrupt Enable Set */
#define REG_QSPI_INTFLAG (0x4200341C) /**< \brief (QSPI) Interrupt Flag Status and Clear */
#define REG_QSPI_STATUS (0x42003420) /**< \brief (QSPI) Status Register */
#define REG_QSPI_INSTRADDR (0x42003430) /**< \brief (QSPI) Instruction Address */
#define REG_QSPI_INSTRCTRL (0x42003434) /**< \brief (QSPI) Instruction Code */
#define REG_QSPI_INSTRFRAME (0x42003438) /**< \brief (QSPI) Instruction Frame */
#define REG_QSPI_SCRAMBCTRL (0x42003440) /**< \brief (QSPI) Scrambling Mode */
#define REG_QSPI_SCRAMBKEY (0x42003444) /**< \brief (QSPI) Scrambling Key */
#else
#define REG_QSPI_CTRLA (*(RwReg *)0x42003400UL) /**< \brief (QSPI) Control A */
#define REG_QSPI_CTRLB (*(RwReg *)0x42003404UL) /**< \brief (QSPI) Control B */
#define REG_QSPI_BAUD (*(RwReg *)0x42003408UL) /**< \brief (QSPI) Baud Rate */
#define REG_QSPI_RXDATA (*(RoReg *)0x4200340CUL) /**< \brief (QSPI) Receive Data */
#define REG_QSPI_TXDATA (*(WoReg *)0x42003410UL) /**< \brief (QSPI) Transmit Data */
#define REG_QSPI_INTENCLR (*(RwReg *)0x42003414UL) /**< \brief (QSPI) Interrupt Enable Clear */
#define REG_QSPI_INTENSET (*(RwReg *)0x42003418UL) /**< \brief (QSPI) Interrupt Enable Set */
#define REG_QSPI_INTFLAG (*(RwReg *)0x4200341CUL) /**< \brief (QSPI) Interrupt Flag Status and Clear */
#define REG_QSPI_STATUS (*(RoReg *)0x42003420UL) /**< \brief (QSPI) Status Register */
#define REG_QSPI_INSTRADDR (*(RwReg *)0x42003430UL) /**< \brief (QSPI) Instruction Address */
#define REG_QSPI_INSTRCTRL (*(RwReg *)0x42003434UL) /**< \brief (QSPI) Instruction Code */
#define REG_QSPI_INSTRFRAME (*(RwReg *)0x42003438UL) /**< \brief (QSPI) Instruction Frame */
#define REG_QSPI_SCRAMBCTRL (*(RwReg *)0x42003440UL) /**< \brief (QSPI) Scrambling Mode */
#define REG_QSPI_SCRAMBKEY (*(WoReg *)0x42003444UL) /**< \brief (QSPI) Scrambling Key */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* ========== Instance parameters for QSPI peripheral ========== */
#define QSPI_DMAC_ID_RX 83
#define QSPI_DMAC_ID_TX 84
#define QSPI_HADDR_MSB 23
#define QSPI_OCMS 1
#endif /* _SAME54_QSPI_INSTANCE_ */