You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Aquatic-Robotic-Courier/software/ARC-FW/config/hpl_dmac_config.h

3074 lines
92 KiB
C

/* Auto-generated config file hpl_dmac_config.h */
#ifndef HPL_DMAC_CONFIG_H
#define HPL_DMAC_CONFIG_H
// <<< Use Configuration Wizard in Context Menu >>>
// <e> DMAC enable
// <i> Indicates whether dmac is enabled or not
// <id> dmac_enable
#ifndef CONF_DMAC_ENABLE
#define CONF_DMAC_ENABLE 0
#endif
// <q> Priority Level 0
// <i> Indicates whether Priority Level 0 is enabled or not
// <id> dmac_lvlen0
#ifndef CONF_DMAC_LVLEN0
#define CONF_DMAC_LVLEN0 0
#endif
// <o> Level 0 Round-Robin Arbitration
// <0=> Static arbitration scheme for channel with priority 0
// <1=> Round-robin arbitration scheme for channel with priority 0
// <i> Defines Level 0 Arbitration for DMA channels
// <id> dmac_rrlvlen0
#ifndef CONF_DMAC_RRLVLEN0
#define CONF_DMAC_RRLVLEN0 0
#endif
// <o> Level 0 Channel Priority Number <0x00-0xFF>
// <id> dmac_lvlpri0
#ifndef CONF_DMAC_LVLPRI0
#define CONF_DMAC_LVLPRI0 0
#endif
// <q> Priority Level 1
// <i> Indicates whether Priority Level 1 is enabled or not
// <id> dmac_lvlen1
#ifndef CONF_DMAC_LVLEN1
#define CONF_DMAC_LVLEN1 0
#endif
// <o> Level 1 Round-Robin Arbitration
// <0=> Static arbitration scheme for channel with priority 1
// <1=> Round-robin arbitration scheme for channel with priority 1
// <i> Defines Level 1 Arbitration for DMA channels
// <id> dmac_rrlvlen1
#ifndef CONF_DMAC_RRLVLEN1
#define CONF_DMAC_RRLVLEN1 0
#endif
// <o> Level 1 Channel Priority Number <0x00-0xFF>
// <id> dmac_lvlpri1
#ifndef CONF_DMAC_LVLPRI1
#define CONF_DMAC_LVLPRI1 0
#endif
// <q> Priority Level 2
// <i> Indicates whether Priority Level 2 is enabled or not
// <id> dmac_lvlen2
#ifndef CONF_DMAC_LVLEN2
#define CONF_DMAC_LVLEN2 0
#endif
// <o> Level 2 Round-Robin Arbitration
// <0=> Static arbitration scheme for channel with priority 2
// <1=> Round-robin arbitration scheme for channel with priority 2
// <i> Defines Level 2 Arbitration for DMA channels
// <id> dmac_rrlvlen2
#ifndef CONF_DMAC_RRLVLEN2
#define CONF_DMAC_RRLVLEN2 0
#endif
// <o> Level 2 Channel Priority Number <0x00-0xFF>
// <id> dmac_lvlpri2
#ifndef CONF_DMAC_LVLPRI2
#define CONF_DMAC_LVLPRI2 0
#endif
// <q> Priority Level 3
// <i> Indicates whether Priority Level 3 is enabled or not
// <id> dmac_lvlen3
#ifndef CONF_DMAC_LVLEN3
#define CONF_DMAC_LVLEN3 0
#endif
// <o> Level 3 Round-Robin Arbitration
// <0=> Static arbitration scheme for channel with priority 3
// <1=> Round-robin arbitration scheme for channel with priority 3
// <i> Defines Level 3 Arbitration for DMA channels
// <id> dmac_rrlvlen3
#ifndef CONF_DMAC_RRLVLEN3
#define CONF_DMAC_RRLVLEN3 0
#endif
// <o> Level 3 Channel Priority Number <0x00-0xFF>
// <id> dmac_lvlpri3
#ifndef CONF_DMAC_LVLPRI3
#define CONF_DMAC_LVLPRI3 0
#endif
// <q> Debug Run
// <i> Indicates whether Debug Run is enabled or not
// <id> dmac_dbgrun
#ifndef CONF_DMAC_DBGRUN
#define CONF_DMAC_DBGRUN 0
#endif
// <e> Channel 0 settings
// <id> dmac_channel_0_settings
#ifndef CONF_DMAC_CHANNEL_0_SETTINGS
#define CONF_DMAC_CHANNEL_0_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 0 is enabled or not
// <id> dmac_enable_0
#ifndef CONF_DMAC_ENABLE_0
#define CONF_DMAC_ENABLE_0 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_0
#ifndef CONF_DMAC_TRIGACT_0
#define CONF_DMAC_TRIGACT_0 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_0
#ifndef CONF_DMAC_TRIGSRC_0
#define CONF_DMAC_TRIGSRC_0 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_0
#ifndef CONF_DMAC_LVL_0
#define CONF_DMAC_LVL_0 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_0
#ifndef CONF_DMAC_EVOE_0
#define CONF_DMAC_EVOE_0 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_0
#ifndef CONF_DMAC_EVIE_0
#define CONF_DMAC_EVIE_0 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_0
#ifndef CONF_DMAC_EVACT_0
#define CONF_DMAC_EVACT_0 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_0
#ifndef CONF_DMAC_STEPSIZE_0
#define CONF_DMAC_STEPSIZE_0 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_0
#ifndef CONF_DMAC_STEPSEL_0
#define CONF_DMAC_STEPSEL_0 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_0
#ifndef CONF_DMAC_SRCINC_0
#define CONF_DMAC_SRCINC_0 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_0
#ifndef CONF_DMAC_DSTINC_0
#define CONF_DMAC_DSTINC_0 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_0
#ifndef CONF_DMAC_BEATSIZE_0
#define CONF_DMAC_BEATSIZE_0 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_0
#ifndef CONF_DMAC_BLOCKACT_0
#define CONF_DMAC_BLOCKACT_0 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_0
#ifndef CONF_DMAC_EVOSEL_0
#define CONF_DMAC_EVOSEL_0 0
#endif
// </e>
// <e> Channel 1 settings
// <id> dmac_channel_1_settings
#ifndef CONF_DMAC_CHANNEL_1_SETTINGS
#define CONF_DMAC_CHANNEL_1_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 1 is enabled or not
// <id> dmac_enable_1
#ifndef CONF_DMAC_ENABLE_1
#define CONF_DMAC_ENABLE_1 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_1
#ifndef CONF_DMAC_TRIGACT_1
#define CONF_DMAC_TRIGACT_1 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_1
#ifndef CONF_DMAC_TRIGSRC_1
#define CONF_DMAC_TRIGSRC_1 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_1
#ifndef CONF_DMAC_LVL_1
#define CONF_DMAC_LVL_1 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_1
#ifndef CONF_DMAC_EVOE_1
#define CONF_DMAC_EVOE_1 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_1
#ifndef CONF_DMAC_EVIE_1
#define CONF_DMAC_EVIE_1 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_1
#ifndef CONF_DMAC_EVACT_1
#define CONF_DMAC_EVACT_1 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_1
#ifndef CONF_DMAC_STEPSIZE_1
#define CONF_DMAC_STEPSIZE_1 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_1
#ifndef CONF_DMAC_STEPSEL_1
#define CONF_DMAC_STEPSEL_1 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_1
#ifndef CONF_DMAC_SRCINC_1
#define CONF_DMAC_SRCINC_1 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_1
#ifndef CONF_DMAC_DSTINC_1
#define CONF_DMAC_DSTINC_1 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_1
#ifndef CONF_DMAC_BEATSIZE_1
#define CONF_DMAC_BEATSIZE_1 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_1
#ifndef CONF_DMAC_BLOCKACT_1
#define CONF_DMAC_BLOCKACT_1 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_1
#ifndef CONF_DMAC_EVOSEL_1
#define CONF_DMAC_EVOSEL_1 0
#endif
// </e>
// <e> Channel 2 settings
// <id> dmac_channel_2_settings
#ifndef CONF_DMAC_CHANNEL_2_SETTINGS
#define CONF_DMAC_CHANNEL_2_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 2 is enabled or not
// <id> dmac_enable_2
#ifndef CONF_DMAC_ENABLE_2
#define CONF_DMAC_ENABLE_2 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_2
#ifndef CONF_DMAC_TRIGACT_2
#define CONF_DMAC_TRIGACT_2 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_2
#ifndef CONF_DMAC_TRIGSRC_2
#define CONF_DMAC_TRIGSRC_2 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_2
#ifndef CONF_DMAC_LVL_2
#define CONF_DMAC_LVL_2 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_2
#ifndef CONF_DMAC_EVOE_2
#define CONF_DMAC_EVOE_2 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_2
#ifndef CONF_DMAC_EVIE_2
#define CONF_DMAC_EVIE_2 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_2
#ifndef CONF_DMAC_EVACT_2
#define CONF_DMAC_EVACT_2 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_2
#ifndef CONF_DMAC_STEPSIZE_2
#define CONF_DMAC_STEPSIZE_2 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_2
#ifndef CONF_DMAC_STEPSEL_2
#define CONF_DMAC_STEPSEL_2 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_2
#ifndef CONF_DMAC_SRCINC_2
#define CONF_DMAC_SRCINC_2 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_2
#ifndef CONF_DMAC_DSTINC_2
#define CONF_DMAC_DSTINC_2 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_2
#ifndef CONF_DMAC_BEATSIZE_2
#define CONF_DMAC_BEATSIZE_2 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_2
#ifndef CONF_DMAC_BLOCKACT_2
#define CONF_DMAC_BLOCKACT_2 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_2
#ifndef CONF_DMAC_EVOSEL_2
#define CONF_DMAC_EVOSEL_2 0
#endif
// </e>
// <e> Channel 3 settings
// <id> dmac_channel_3_settings
#ifndef CONF_DMAC_CHANNEL_3_SETTINGS
#define CONF_DMAC_CHANNEL_3_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 3 is enabled or not
// <id> dmac_enable_3
#ifndef CONF_DMAC_ENABLE_3
#define CONF_DMAC_ENABLE_3 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_3
#ifndef CONF_DMAC_TRIGACT_3
#define CONF_DMAC_TRIGACT_3 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_3
#ifndef CONF_DMAC_TRIGSRC_3
#define CONF_DMAC_TRIGSRC_3 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_3
#ifndef CONF_DMAC_LVL_3
#define CONF_DMAC_LVL_3 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_3
#ifndef CONF_DMAC_EVOE_3
#define CONF_DMAC_EVOE_3 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_3
#ifndef CONF_DMAC_EVIE_3
#define CONF_DMAC_EVIE_3 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_3
#ifndef CONF_DMAC_EVACT_3
#define CONF_DMAC_EVACT_3 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_3
#ifndef CONF_DMAC_STEPSIZE_3
#define CONF_DMAC_STEPSIZE_3 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_3
#ifndef CONF_DMAC_STEPSEL_3
#define CONF_DMAC_STEPSEL_3 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_3
#ifndef CONF_DMAC_SRCINC_3
#define CONF_DMAC_SRCINC_3 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_3
#ifndef CONF_DMAC_DSTINC_3
#define CONF_DMAC_DSTINC_3 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_3
#ifndef CONF_DMAC_BEATSIZE_3
#define CONF_DMAC_BEATSIZE_3 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_3
#ifndef CONF_DMAC_BLOCKACT_3
#define CONF_DMAC_BLOCKACT_3 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_3
#ifndef CONF_DMAC_EVOSEL_3
#define CONF_DMAC_EVOSEL_3 0
#endif
// </e>
// <e> Channel 4 settings
// <id> dmac_channel_4_settings
#ifndef CONF_DMAC_CHANNEL_4_SETTINGS
#define CONF_DMAC_CHANNEL_4_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 4 is enabled or not
// <id> dmac_enable_4
#ifndef CONF_DMAC_ENABLE_4
#define CONF_DMAC_ENABLE_4 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_4
#ifndef CONF_DMAC_TRIGACT_4
#define CONF_DMAC_TRIGACT_4 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_4
#ifndef CONF_DMAC_TRIGSRC_4
#define CONF_DMAC_TRIGSRC_4 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_4
#ifndef CONF_DMAC_LVL_4
#define CONF_DMAC_LVL_4 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_4
#ifndef CONF_DMAC_EVOE_4
#define CONF_DMAC_EVOE_4 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_4
#ifndef CONF_DMAC_EVIE_4
#define CONF_DMAC_EVIE_4 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_4
#ifndef CONF_DMAC_EVACT_4
#define CONF_DMAC_EVACT_4 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_4
#ifndef CONF_DMAC_STEPSIZE_4
#define CONF_DMAC_STEPSIZE_4 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_4
#ifndef CONF_DMAC_STEPSEL_4
#define CONF_DMAC_STEPSEL_4 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_4
#ifndef CONF_DMAC_SRCINC_4
#define CONF_DMAC_SRCINC_4 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_4
#ifndef CONF_DMAC_DSTINC_4
#define CONF_DMAC_DSTINC_4 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_4
#ifndef CONF_DMAC_BEATSIZE_4
#define CONF_DMAC_BEATSIZE_4 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_4
#ifndef CONF_DMAC_BLOCKACT_4
#define CONF_DMAC_BLOCKACT_4 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_4
#ifndef CONF_DMAC_EVOSEL_4
#define CONF_DMAC_EVOSEL_4 0
#endif
// </e>
// <e> Channel 5 settings
// <id> dmac_channel_5_settings
#ifndef CONF_DMAC_CHANNEL_5_SETTINGS
#define CONF_DMAC_CHANNEL_5_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 5 is enabled or not
// <id> dmac_enable_5
#ifndef CONF_DMAC_ENABLE_5
#define CONF_DMAC_ENABLE_5 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_5
#ifndef CONF_DMAC_TRIGACT_5
#define CONF_DMAC_TRIGACT_5 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_5
#ifndef CONF_DMAC_TRIGSRC_5
#define CONF_DMAC_TRIGSRC_5 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_5
#ifndef CONF_DMAC_LVL_5
#define CONF_DMAC_LVL_5 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_5
#ifndef CONF_DMAC_EVOE_5
#define CONF_DMAC_EVOE_5 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_5
#ifndef CONF_DMAC_EVIE_5
#define CONF_DMAC_EVIE_5 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_5
#ifndef CONF_DMAC_EVACT_5
#define CONF_DMAC_EVACT_5 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_5
#ifndef CONF_DMAC_STEPSIZE_5
#define CONF_DMAC_STEPSIZE_5 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_5
#ifndef CONF_DMAC_STEPSEL_5
#define CONF_DMAC_STEPSEL_5 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_5
#ifndef CONF_DMAC_SRCINC_5
#define CONF_DMAC_SRCINC_5 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_5
#ifndef CONF_DMAC_DSTINC_5
#define CONF_DMAC_DSTINC_5 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_5
#ifndef CONF_DMAC_BEATSIZE_5
#define CONF_DMAC_BEATSIZE_5 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_5
#ifndef CONF_DMAC_BLOCKACT_5
#define CONF_DMAC_BLOCKACT_5 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_5
#ifndef CONF_DMAC_EVOSEL_5
#define CONF_DMAC_EVOSEL_5 0
#endif
// </e>
// <e> Channel 6 settings
// <id> dmac_channel_6_settings
#ifndef CONF_DMAC_CHANNEL_6_SETTINGS
#define CONF_DMAC_CHANNEL_6_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 6 is enabled or not
// <id> dmac_enable_6
#ifndef CONF_DMAC_ENABLE_6
#define CONF_DMAC_ENABLE_6 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_6
#ifndef CONF_DMAC_TRIGACT_6
#define CONF_DMAC_TRIGACT_6 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_6
#ifndef CONF_DMAC_TRIGSRC_6
#define CONF_DMAC_TRIGSRC_6 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_6
#ifndef CONF_DMAC_LVL_6
#define CONF_DMAC_LVL_6 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_6
#ifndef CONF_DMAC_EVOE_6
#define CONF_DMAC_EVOE_6 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_6
#ifndef CONF_DMAC_EVIE_6
#define CONF_DMAC_EVIE_6 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_6
#ifndef CONF_DMAC_EVACT_6
#define CONF_DMAC_EVACT_6 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_6
#ifndef CONF_DMAC_STEPSIZE_6
#define CONF_DMAC_STEPSIZE_6 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_6
#ifndef CONF_DMAC_STEPSEL_6
#define CONF_DMAC_STEPSEL_6 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_6
#ifndef CONF_DMAC_SRCINC_6
#define CONF_DMAC_SRCINC_6 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_6
#ifndef CONF_DMAC_DSTINC_6
#define CONF_DMAC_DSTINC_6 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_6
#ifndef CONF_DMAC_BEATSIZE_6
#define CONF_DMAC_BEATSIZE_6 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_6
#ifndef CONF_DMAC_BLOCKACT_6
#define CONF_DMAC_BLOCKACT_6 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_6
#ifndef CONF_DMAC_EVOSEL_6
#define CONF_DMAC_EVOSEL_6 0
#endif
// </e>
// <e> Channel 7 settings
// <id> dmac_channel_7_settings
#ifndef CONF_DMAC_CHANNEL_7_SETTINGS
#define CONF_DMAC_CHANNEL_7_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 7 is enabled or not
// <id> dmac_enable_7
#ifndef CONF_DMAC_ENABLE_7
#define CONF_DMAC_ENABLE_7 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_7
#ifndef CONF_DMAC_TRIGACT_7
#define CONF_DMAC_TRIGACT_7 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_7
#ifndef CONF_DMAC_TRIGSRC_7
#define CONF_DMAC_TRIGSRC_7 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_7
#ifndef CONF_DMAC_LVL_7
#define CONF_DMAC_LVL_7 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_7
#ifndef CONF_DMAC_EVOE_7
#define CONF_DMAC_EVOE_7 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_7
#ifndef CONF_DMAC_EVIE_7
#define CONF_DMAC_EVIE_7 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_7
#ifndef CONF_DMAC_EVACT_7
#define CONF_DMAC_EVACT_7 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_7
#ifndef CONF_DMAC_STEPSIZE_7
#define CONF_DMAC_STEPSIZE_7 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_7
#ifndef CONF_DMAC_STEPSEL_7
#define CONF_DMAC_STEPSEL_7 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_7
#ifndef CONF_DMAC_SRCINC_7
#define CONF_DMAC_SRCINC_7 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_7
#ifndef CONF_DMAC_DSTINC_7
#define CONF_DMAC_DSTINC_7 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_7
#ifndef CONF_DMAC_BEATSIZE_7
#define CONF_DMAC_BEATSIZE_7 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_7
#ifndef CONF_DMAC_BLOCKACT_7
#define CONF_DMAC_BLOCKACT_7 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_7
#ifndef CONF_DMAC_EVOSEL_7
#define CONF_DMAC_EVOSEL_7 0
#endif
// </e>
// <e> Channel 8 settings
// <id> dmac_channel_8_settings
#ifndef CONF_DMAC_CHANNEL_8_SETTINGS
#define CONF_DMAC_CHANNEL_8_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 8 is enabled or not
// <id> dmac_enable_8
#ifndef CONF_DMAC_ENABLE_8
#define CONF_DMAC_ENABLE_8 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_8
#ifndef CONF_DMAC_TRIGACT_8
#define CONF_DMAC_TRIGACT_8 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_8
#ifndef CONF_DMAC_TRIGSRC_8
#define CONF_DMAC_TRIGSRC_8 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_8
#ifndef CONF_DMAC_LVL_8
#define CONF_DMAC_LVL_8 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_8
#ifndef CONF_DMAC_EVOE_8
#define CONF_DMAC_EVOE_8 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_8
#ifndef CONF_DMAC_EVIE_8
#define CONF_DMAC_EVIE_8 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_8
#ifndef CONF_DMAC_EVACT_8
#define CONF_DMAC_EVACT_8 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_8
#ifndef CONF_DMAC_STEPSIZE_8
#define CONF_DMAC_STEPSIZE_8 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_8
#ifndef CONF_DMAC_STEPSEL_8
#define CONF_DMAC_STEPSEL_8 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_8
#ifndef CONF_DMAC_SRCINC_8
#define CONF_DMAC_SRCINC_8 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_8
#ifndef CONF_DMAC_DSTINC_8
#define CONF_DMAC_DSTINC_8 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_8
#ifndef CONF_DMAC_BEATSIZE_8
#define CONF_DMAC_BEATSIZE_8 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_8
#ifndef CONF_DMAC_BLOCKACT_8
#define CONF_DMAC_BLOCKACT_8 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_8
#ifndef CONF_DMAC_EVOSEL_8
#define CONF_DMAC_EVOSEL_8 0
#endif
// </e>
// <e> Channel 9 settings
// <id> dmac_channel_9_settings
#ifndef CONF_DMAC_CHANNEL_9_SETTINGS
#define CONF_DMAC_CHANNEL_9_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 9 is enabled or not
// <id> dmac_enable_9
#ifndef CONF_DMAC_ENABLE_9
#define CONF_DMAC_ENABLE_9 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_9
#ifndef CONF_DMAC_TRIGACT_9
#define CONF_DMAC_TRIGACT_9 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_9
#ifndef CONF_DMAC_TRIGSRC_9
#define CONF_DMAC_TRIGSRC_9 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_9
#ifndef CONF_DMAC_LVL_9
#define CONF_DMAC_LVL_9 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_9
#ifndef CONF_DMAC_EVOE_9
#define CONF_DMAC_EVOE_9 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_9
#ifndef CONF_DMAC_EVIE_9
#define CONF_DMAC_EVIE_9 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_9
#ifndef CONF_DMAC_EVACT_9
#define CONF_DMAC_EVACT_9 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_9
#ifndef CONF_DMAC_STEPSIZE_9
#define CONF_DMAC_STEPSIZE_9 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_9
#ifndef CONF_DMAC_STEPSEL_9
#define CONF_DMAC_STEPSEL_9 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_9
#ifndef CONF_DMAC_SRCINC_9
#define CONF_DMAC_SRCINC_9 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_9
#ifndef CONF_DMAC_DSTINC_9
#define CONF_DMAC_DSTINC_9 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_9
#ifndef CONF_DMAC_BEATSIZE_9
#define CONF_DMAC_BEATSIZE_9 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_9
#ifndef CONF_DMAC_BLOCKACT_9
#define CONF_DMAC_BLOCKACT_9 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_9
#ifndef CONF_DMAC_EVOSEL_9
#define CONF_DMAC_EVOSEL_9 0
#endif
// </e>
// <e> Channel 10 settings
// <id> dmac_channel_10_settings
#ifndef CONF_DMAC_CHANNEL_10_SETTINGS
#define CONF_DMAC_CHANNEL_10_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 10 is enabled or not
// <id> dmac_enable_10
#ifndef CONF_DMAC_ENABLE_10
#define CONF_DMAC_ENABLE_10 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_10
#ifndef CONF_DMAC_TRIGACT_10
#define CONF_DMAC_TRIGACT_10 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_10
#ifndef CONF_DMAC_TRIGSRC_10
#define CONF_DMAC_TRIGSRC_10 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_10
#ifndef CONF_DMAC_LVL_10
#define CONF_DMAC_LVL_10 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_10
#ifndef CONF_DMAC_EVOE_10
#define CONF_DMAC_EVOE_10 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_10
#ifndef CONF_DMAC_EVIE_10
#define CONF_DMAC_EVIE_10 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_10
#ifndef CONF_DMAC_EVACT_10
#define CONF_DMAC_EVACT_10 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_10
#ifndef CONF_DMAC_STEPSIZE_10
#define CONF_DMAC_STEPSIZE_10 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_10
#ifndef CONF_DMAC_STEPSEL_10
#define CONF_DMAC_STEPSEL_10 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_10
#ifndef CONF_DMAC_SRCINC_10
#define CONF_DMAC_SRCINC_10 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_10
#ifndef CONF_DMAC_DSTINC_10
#define CONF_DMAC_DSTINC_10 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_10
#ifndef CONF_DMAC_BEATSIZE_10
#define CONF_DMAC_BEATSIZE_10 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_10
#ifndef CONF_DMAC_BLOCKACT_10
#define CONF_DMAC_BLOCKACT_10 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_10
#ifndef CONF_DMAC_EVOSEL_10
#define CONF_DMAC_EVOSEL_10 0
#endif
// </e>
// <e> Channel 11 settings
// <id> dmac_channel_11_settings
#ifndef CONF_DMAC_CHANNEL_11_SETTINGS
#define CONF_DMAC_CHANNEL_11_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 11 is enabled or not
// <id> dmac_enable_11
#ifndef CONF_DMAC_ENABLE_11
#define CONF_DMAC_ENABLE_11 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_11
#ifndef CONF_DMAC_TRIGACT_11
#define CONF_DMAC_TRIGACT_11 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_11
#ifndef CONF_DMAC_TRIGSRC_11
#define CONF_DMAC_TRIGSRC_11 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_11
#ifndef CONF_DMAC_LVL_11
#define CONF_DMAC_LVL_11 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_11
#ifndef CONF_DMAC_EVOE_11
#define CONF_DMAC_EVOE_11 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_11
#ifndef CONF_DMAC_EVIE_11
#define CONF_DMAC_EVIE_11 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_11
#ifndef CONF_DMAC_EVACT_11
#define CONF_DMAC_EVACT_11 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_11
#ifndef CONF_DMAC_STEPSIZE_11
#define CONF_DMAC_STEPSIZE_11 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_11
#ifndef CONF_DMAC_STEPSEL_11
#define CONF_DMAC_STEPSEL_11 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_11
#ifndef CONF_DMAC_SRCINC_11
#define CONF_DMAC_SRCINC_11 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_11
#ifndef CONF_DMAC_DSTINC_11
#define CONF_DMAC_DSTINC_11 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_11
#ifndef CONF_DMAC_BEATSIZE_11
#define CONF_DMAC_BEATSIZE_11 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_11
#ifndef CONF_DMAC_BLOCKACT_11
#define CONF_DMAC_BLOCKACT_11 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_11
#ifndef CONF_DMAC_EVOSEL_11
#define CONF_DMAC_EVOSEL_11 0
#endif
// </e>
// <e> Channel 12 settings
// <id> dmac_channel_12_settings
#ifndef CONF_DMAC_CHANNEL_12_SETTINGS
#define CONF_DMAC_CHANNEL_12_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 12 is enabled or not
// <id> dmac_enable_12
#ifndef CONF_DMAC_ENABLE_12
#define CONF_DMAC_ENABLE_12 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_12
#ifndef CONF_DMAC_TRIGACT_12
#define CONF_DMAC_TRIGACT_12 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_12
#ifndef CONF_DMAC_TRIGSRC_12
#define CONF_DMAC_TRIGSRC_12 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_12
#ifndef CONF_DMAC_LVL_12
#define CONF_DMAC_LVL_12 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_12
#ifndef CONF_DMAC_EVOE_12
#define CONF_DMAC_EVOE_12 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_12
#ifndef CONF_DMAC_EVIE_12
#define CONF_DMAC_EVIE_12 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_12
#ifndef CONF_DMAC_EVACT_12
#define CONF_DMAC_EVACT_12 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_12
#ifndef CONF_DMAC_STEPSIZE_12
#define CONF_DMAC_STEPSIZE_12 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_12
#ifndef CONF_DMAC_STEPSEL_12
#define CONF_DMAC_STEPSEL_12 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_12
#ifndef CONF_DMAC_SRCINC_12
#define CONF_DMAC_SRCINC_12 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_12
#ifndef CONF_DMAC_DSTINC_12
#define CONF_DMAC_DSTINC_12 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_12
#ifndef CONF_DMAC_BEATSIZE_12
#define CONF_DMAC_BEATSIZE_12 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_12
#ifndef CONF_DMAC_BLOCKACT_12
#define CONF_DMAC_BLOCKACT_12 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_12
#ifndef CONF_DMAC_EVOSEL_12
#define CONF_DMAC_EVOSEL_12 0
#endif
// </e>
// <e> Channel 13 settings
// <id> dmac_channel_13_settings
#ifndef CONF_DMAC_CHANNEL_13_SETTINGS
#define CONF_DMAC_CHANNEL_13_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 13 is enabled or not
// <id> dmac_enable_13
#ifndef CONF_DMAC_ENABLE_13
#define CONF_DMAC_ENABLE_13 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_13
#ifndef CONF_DMAC_TRIGACT_13
#define CONF_DMAC_TRIGACT_13 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_13
#ifndef CONF_DMAC_TRIGSRC_13
#define CONF_DMAC_TRIGSRC_13 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_13
#ifndef CONF_DMAC_LVL_13
#define CONF_DMAC_LVL_13 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_13
#ifndef CONF_DMAC_EVOE_13
#define CONF_DMAC_EVOE_13 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_13
#ifndef CONF_DMAC_EVIE_13
#define CONF_DMAC_EVIE_13 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_13
#ifndef CONF_DMAC_EVACT_13
#define CONF_DMAC_EVACT_13 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_13
#ifndef CONF_DMAC_STEPSIZE_13
#define CONF_DMAC_STEPSIZE_13 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_13
#ifndef CONF_DMAC_STEPSEL_13
#define CONF_DMAC_STEPSEL_13 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_13
#ifndef CONF_DMAC_SRCINC_13
#define CONF_DMAC_SRCINC_13 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_13
#ifndef CONF_DMAC_DSTINC_13
#define CONF_DMAC_DSTINC_13 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_13
#ifndef CONF_DMAC_BEATSIZE_13
#define CONF_DMAC_BEATSIZE_13 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_13
#ifndef CONF_DMAC_BLOCKACT_13
#define CONF_DMAC_BLOCKACT_13 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_13
#ifndef CONF_DMAC_EVOSEL_13
#define CONF_DMAC_EVOSEL_13 0
#endif
// </e>
// <e> Channel 14 settings
// <id> dmac_channel_14_settings
#ifndef CONF_DMAC_CHANNEL_14_SETTINGS
#define CONF_DMAC_CHANNEL_14_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 14 is enabled or not
// <id> dmac_enable_14
#ifndef CONF_DMAC_ENABLE_14
#define CONF_DMAC_ENABLE_14 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_14
#ifndef CONF_DMAC_TRIGACT_14
#define CONF_DMAC_TRIGACT_14 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_14
#ifndef CONF_DMAC_TRIGSRC_14
#define CONF_DMAC_TRIGSRC_14 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_14
#ifndef CONF_DMAC_LVL_14
#define CONF_DMAC_LVL_14 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_14
#ifndef CONF_DMAC_EVOE_14
#define CONF_DMAC_EVOE_14 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_14
#ifndef CONF_DMAC_EVIE_14
#define CONF_DMAC_EVIE_14 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_14
#ifndef CONF_DMAC_EVACT_14
#define CONF_DMAC_EVACT_14 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_14
#ifndef CONF_DMAC_STEPSIZE_14
#define CONF_DMAC_STEPSIZE_14 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_14
#ifndef CONF_DMAC_STEPSEL_14
#define CONF_DMAC_STEPSEL_14 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_14
#ifndef CONF_DMAC_SRCINC_14
#define CONF_DMAC_SRCINC_14 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_14
#ifndef CONF_DMAC_DSTINC_14
#define CONF_DMAC_DSTINC_14 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_14
#ifndef CONF_DMAC_BEATSIZE_14
#define CONF_DMAC_BEATSIZE_14 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_14
#ifndef CONF_DMAC_BLOCKACT_14
#define CONF_DMAC_BLOCKACT_14 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_14
#ifndef CONF_DMAC_EVOSEL_14
#define CONF_DMAC_EVOSEL_14 0
#endif
// </e>
// <e> Channel 15 settings
// <id> dmac_channel_15_settings
#ifndef CONF_DMAC_CHANNEL_15_SETTINGS
#define CONF_DMAC_CHANNEL_15_SETTINGS 0
#endif
// <q> Channel Enable
// <i> Indicates whether channel 15 is enabled or not
// <id> dmac_enable_15
#ifndef CONF_DMAC_ENABLE_15
#define CONF_DMAC_ENABLE_15 0
#endif
// <o> Trigger action
// <0=> One trigger required for each block transfer
// <2=> One trigger required for each beat transfer
// <3=> One trigger required for each transaction
// <i> Defines the trigger action used for a transfer
// <id> dmac_trigact_15
#ifndef CONF_DMAC_TRIGACT_15
#define CONF_DMAC_TRIGACT_15 0
#endif
// <o> Trigger source
// <0x00=> Only software/event triggers
// <0x01=> SERCOM0 RX Trigger
// <0x02=> SERCOM0 TX Trigger
// <0x03=> SERCOM1 RX Trigger
// <0x04=> SERCOM1 TX Trigger
// <0x05=> SERCOM2 RX Trigger
// <0x06=> SERCOM2 TX Trigger
// <0x07=> SERCOM3 RX Trigger
// <0x08=> SERCOM3 TX Trigger
// <0x09=> SERCOM4 RX Trigger
// <0x0A=> SERCOM4 TX Trigger
// <0x0B=> SERCOM5 RX Trigger
// <0x0C=> SERCOM5 TX Trigger
// <0x0D=> TCC0 Overflow Trigger
// <0x0E=> TCC0 Match/Compare 0 Trigger
// <0x0F=> TCC0 Match/Compare 1 Trigger
// <0x10=> TCC0 Match/Compare 2 Trigger
// <0x11=> TCC0 Match/Compare 3 Trigger
// <0x12=> TCC1 Overflow Trigger
// <0x13=> TCC1 Match/Compare 0 Trigger
// <0x14=> TCC1 Match/Compare 1 Trigger
// <0x15=> TCC2 Overflow Trigger
// <0x16=> TCC2 Match/Compare 0 Trigger
// <0x17=> TCC2 Match/Compare 1 Trigger
// <0x18=> TC3 Overflow Trigger
// <0x19=> TC3 Match/Compare 0 Trigger
// <0x1A=> TC3 Match/Compare 1 Trigger
// <0x1B=> TC4 Overflow Trigger
// <0x1C=> TC4 Match/Compare 0 Trigger
// <0x1D=> TC4 Match/Compare 1 Trigger
// <0x1E=> TC5 Overflow Trigger
// <0x1F=> TC5 Match/Compare 0 Trigger
// <0x20=> TC5 Match/Compare 1 Trigger
// <0x21=> TC6 Overflow Trigger
// <0x22=> TC6 Match/Compare 0 Trigger
// <0x23=> TC6 Match/Compare 1 Trigger
// <0x24=> TC7 Overflow Trigger
// <0x25=> TC7 Match/Compare 0 Trigger
// <0x26=> TC7 Match/Compare 1 Trigger
// <0x27=> ADC Result Ready Trigger
// <0x28=> DAC Empty Trigger
// <0x29=> I2S Rx 0 Trigger
// <0x2A=> I2S Rx 1 Trigger
// <0x2B=> I2S Tx 0 Trigger
// <0x2C=> I2S Tx 1 Trigger
// <i> Defines the peripheral trigger which is source of the transfer
// <id> dmac_trifsrc_15
#ifndef CONF_DMAC_TRIGSRC_15
#define CONF_DMAC_TRIGSRC_15 0
#endif
// <o> Channel Arbitration Level
// <0=> Channel priority 0
// <1=> Channel priority 1
// <2=> Channel priority 2
// <3=> Channel priority 3
// <i> Defines the arbitration level for this channel
// <id> dmac_lvl_15
#ifndef CONF_DMAC_LVL_15
#define CONF_DMAC_LVL_15 0
#endif
// <q> Channel Event Output
// <i> Indicates whether channel event generation is enabled or not
// <id> dmac_evoe_15
#ifndef CONF_DMAC_EVOE_15
#define CONF_DMAC_EVOE_15 0
#endif
// <q> Channel Event Input
// <i> Indicates whether channel event reception is enabled or not
// <id> dmac_evie_15
#ifndef CONF_DMAC_EVIE_15
#define CONF_DMAC_EVIE_15 0
#endif
// <o> Event Input Action
// <0=> No action
// <1=> Normal transfer and conditional transfer on strobe trigger
// <2=> Conditional transfer trigger
// <3=> Conditional block transfer
// <4=> Channel suspend operation
// <5=> Channel resume operation
// <6=> Skip next block suspend action
// <i> Defines the event input action
// <id> dmac_evact_15
#ifndef CONF_DMAC_EVACT_15
#define CONF_DMAC_EVACT_15 0
#endif
// <o> Address Increment Step Size
// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1
// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2
// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4
// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8
// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16
// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32
// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64
// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128
// <i> Defines the address increment step size, applies to source or destination address
// <id> dmac_stepsize_15
#ifndef CONF_DMAC_STEPSIZE_15
#define CONF_DMAC_STEPSIZE_15 0
#endif
// <o> Step Selection
// <0=> Step size settings apply to the destination address
// <1=> Step size settings apply to the source address
// <i> Defines whether source or destination addresses are using the step size settings
// <id> dmac_stepsel_15
#ifndef CONF_DMAC_STEPSEL_15
#define CONF_DMAC_STEPSEL_15 0
#endif
// <q> Source Address Increment
// <i> Indicates whether the source address incrementation is enabled or not
// <id> dmac_srcinc_15
#ifndef CONF_DMAC_SRCINC_15
#define CONF_DMAC_SRCINC_15 0
#endif
// <q> Destination Address Increment
// <i> Indicates whether the destination address incrementation is enabled or not
// <id> dmac_dstinc_15
#ifndef CONF_DMAC_DSTINC_15
#define CONF_DMAC_DSTINC_15 0
#endif
// <o> Beat Size
// <0=> 8-bit bus transfer
// <1=> 16-bit bus transfer
// <2=> 32-bit bus transfer
// <i> Defines the size of one beat
// <id> dmac_beatsize_15
#ifndef CONF_DMAC_BEATSIZE_15
#define CONF_DMAC_BEATSIZE_15 0
#endif
// <o> Block Action
// <0=> Channel will be disabled if it is the last block transfer in the transaction
// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt
// <2=> Channel suspend operation is complete
// <3=> Both channel suspend operation and block interrupt
// <i> Defines the the DMAC should take after a block transfer has completed
// <id> dmac_blockact_15
#ifndef CONF_DMAC_BLOCKACT_15
#define CONF_DMAC_BLOCKACT_15 0
#endif
// <o> Event Output Selection
// <0=> Event generation disabled
// <1=> Event strobe when block transfer complete
// <3=> Event strobe when beat transfer complete
// <i> Defines the event output selection
// <id> dmac_evosel_15
#ifndef CONF_DMAC_EVOSEL_15
#define CONF_DMAC_EVOSEL_15 0
#endif
// </e>
// </e>
// <<< end of configuration section >>>
#endif // HPL_DMAC_CONFIG_H