You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Aquatic-Robotic-Courier/software/ARC-FW/samd21a/include/instance/i2s.h

81 lines
3.9 KiB
C

/**
* \file
*
* \brief Instance description for I2S
*
* Copyright (c) 2018 Microchip Technology Inc.
*
* \asf_license_start
*
* \page License
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the Licence at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* \asf_license_stop
*
*/
#ifndef _SAMD21_I2S_INSTANCE_
#define _SAMD21_I2S_INSTANCE_
/* ========== Register definition for I2S peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_I2S_CTRLA (0x42005000) /**< \brief (I2S) Control A */
#define REG_I2S_CLKCTRL0 (0x42005004) /**< \brief (I2S) Clock Unit 0 Control */
#define REG_I2S_CLKCTRL1 (0x42005008) /**< \brief (I2S) Clock Unit 1 Control */
#define REG_I2S_INTENCLR (0x4200500C) /**< \brief (I2S) Interrupt Enable Clear */
#define REG_I2S_INTENSET (0x42005010) /**< \brief (I2S) Interrupt Enable Set */
#define REG_I2S_INTFLAG (0x42005014) /**< \brief (I2S) Interrupt Flag Status and Clear */
#define REG_I2S_SYNCBUSY (0x42005018) /**< \brief (I2S) Synchronization Status */
#define REG_I2S_SERCTRL0 (0x42005020) /**< \brief (I2S) Serializer 0 Control */
#define REG_I2S_SERCTRL1 (0x42005024) /**< \brief (I2S) Serializer 1 Control */
#define REG_I2S_DATA0 (0x42005030) /**< \brief (I2S) Data 0 */
#define REG_I2S_DATA1 (0x42005034) /**< \brief (I2S) Data 1 */
#else
#define REG_I2S_CTRLA (*(RwReg8 *)0x42005000UL) /**< \brief (I2S) Control A */
#define REG_I2S_CLKCTRL0 (*(RwReg *)0x42005004UL) /**< \brief (I2S) Clock Unit 0 Control */
#define REG_I2S_CLKCTRL1 (*(RwReg *)0x42005008UL) /**< \brief (I2S) Clock Unit 1 Control */
#define REG_I2S_INTENCLR (*(RwReg16*)0x4200500CUL) /**< \brief (I2S) Interrupt Enable Clear */
#define REG_I2S_INTENSET (*(RwReg16*)0x42005010UL) /**< \brief (I2S) Interrupt Enable Set */
#define REG_I2S_INTFLAG (*(RwReg16*)0x42005014UL) /**< \brief (I2S) Interrupt Flag Status and Clear */
#define REG_I2S_SYNCBUSY (*(RoReg16*)0x42005018UL) /**< \brief (I2S) Synchronization Status */
#define REG_I2S_SERCTRL0 (*(RwReg *)0x42005020UL) /**< \brief (I2S) Serializer 0 Control */
#define REG_I2S_SERCTRL1 (*(RwReg *)0x42005024UL) /**< \brief (I2S) Serializer 1 Control */
#define REG_I2S_DATA0 (*(RwReg *)0x42005030UL) /**< \brief (I2S) Data 0 */
#define REG_I2S_DATA1 (*(RwReg *)0x42005034UL) /**< \brief (I2S) Data 1 */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* ========== Instance parameters for I2S peripheral ========== */
#define I2S_CLK_NUM 2 // Number of clock units
#define I2S_DMAC_ID_RX_0 41
#define I2S_DMAC_ID_RX_1 42
#define I2S_DMAC_ID_RX_LSB 41
#define I2S_DMAC_ID_RX_MSB 42
#define I2S_DMAC_ID_RX_SIZE 2
#define I2S_DMAC_ID_TX_0 43
#define I2S_DMAC_ID_TX_1 44
#define I2S_DMAC_ID_TX_LSB 43
#define I2S_DMAC_ID_TX_MSB 44
#define I2S_DMAC_ID_TX_SIZE 2
#define I2S_GCLK_ID_0 35
#define I2S_GCLK_ID_1 36
#define I2S_GCLK_ID_LSB 35
#define I2S_GCLK_ID_MSB 36
#define I2S_GCLK_ID_SIZE 2
#define I2S_MAX_SLOTS 8 // Max number of data slots in frame
#define I2S_SER_NUM 2 // Number of serializers
#endif /* _SAMD21_I2S_INSTANCE_ */