You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

100 lines
6.5 KiB
C

3 years ago
/**
* \file
*
* \brief Instance description for ADC0
*
* Copyright (c) 2019 Microchip Technology Inc.
*
* \asf_license_start
*
* \page License
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the Licence at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* \asf_license_stop
*
*/
#ifndef _SAME54_ADC0_INSTANCE_
#define _SAME54_ADC0_INSTANCE_
/* ========== Register definition for ADC0 peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_ADC0_CTRLA (0x43001C00) /**< \brief (ADC0) Control A */
#define REG_ADC0_EVCTRL (0x43001C02) /**< \brief (ADC0) Event Control */
#define REG_ADC0_DBGCTRL (0x43001C03) /**< \brief (ADC0) Debug Control */
#define REG_ADC0_INPUTCTRL (0x43001C04) /**< \brief (ADC0) Input Control */
#define REG_ADC0_CTRLB (0x43001C06) /**< \brief (ADC0) Control B */
#define REG_ADC0_REFCTRL (0x43001C08) /**< \brief (ADC0) Reference Control */
#define REG_ADC0_AVGCTRL (0x43001C0A) /**< \brief (ADC0) Average Control */
#define REG_ADC0_SAMPCTRL (0x43001C0B) /**< \brief (ADC0) Sample Time Control */
#define REG_ADC0_WINLT (0x43001C0C) /**< \brief (ADC0) Window Monitor Lower Threshold */
#define REG_ADC0_WINUT (0x43001C0E) /**< \brief (ADC0) Window Monitor Upper Threshold */
#define REG_ADC0_GAINCORR (0x43001C10) /**< \brief (ADC0) Gain Correction */
#define REG_ADC0_OFFSETCORR (0x43001C12) /**< \brief (ADC0) Offset Correction */
#define REG_ADC0_SWTRIG (0x43001C14) /**< \brief (ADC0) Software Trigger */
#define REG_ADC0_INTENCLR (0x43001C2C) /**< \brief (ADC0) Interrupt Enable Clear */
#define REG_ADC0_INTENSET (0x43001C2D) /**< \brief (ADC0) Interrupt Enable Set */
#define REG_ADC0_INTFLAG (0x43001C2E) /**< \brief (ADC0) Interrupt Flag Status and Clear */
#define REG_ADC0_STATUS (0x43001C2F) /**< \brief (ADC0) Status */
#define REG_ADC0_SYNCBUSY (0x43001C30) /**< \brief (ADC0) Synchronization Busy */
#define REG_ADC0_DSEQDATA (0x43001C34) /**< \brief (ADC0) DMA Sequencial Data */
#define REG_ADC0_DSEQCTRL (0x43001C38) /**< \brief (ADC0) DMA Sequential Control */
#define REG_ADC0_DSEQSTAT (0x43001C3C) /**< \brief (ADC0) DMA Sequencial Status */
#define REG_ADC0_RESULT (0x43001C40) /**< \brief (ADC0) Result Conversion Value */
#define REG_ADC0_RESS (0x43001C44) /**< \brief (ADC0) Last Sample Result */
#define REG_ADC0_CALIB (0x43001C48) /**< \brief (ADC0) Calibration */
#else
#define REG_ADC0_CTRLA (*(RwReg16*)0x43001C00UL) /**< \brief (ADC0) Control A */
#define REG_ADC0_EVCTRL (*(RwReg8 *)0x43001C02UL) /**< \brief (ADC0) Event Control */
#define REG_ADC0_DBGCTRL (*(RwReg8 *)0x43001C03UL) /**< \brief (ADC0) Debug Control */
#define REG_ADC0_INPUTCTRL (*(RwReg16*)0x43001C04UL) /**< \brief (ADC0) Input Control */
#define REG_ADC0_CTRLB (*(RwReg16*)0x43001C06UL) /**< \brief (ADC0) Control B */
#define REG_ADC0_REFCTRL (*(RwReg8 *)0x43001C08UL) /**< \brief (ADC0) Reference Control */
#define REG_ADC0_AVGCTRL (*(RwReg8 *)0x43001C0AUL) /**< \brief (ADC0) Average Control */
#define REG_ADC0_SAMPCTRL (*(RwReg8 *)0x43001C0BUL) /**< \brief (ADC0) Sample Time Control */
#define REG_ADC0_WINLT (*(RwReg16*)0x43001C0CUL) /**< \brief (ADC0) Window Monitor Lower Threshold */
#define REG_ADC0_WINUT (*(RwReg16*)0x43001C0EUL) /**< \brief (ADC0) Window Monitor Upper Threshold */
#define REG_ADC0_GAINCORR (*(RwReg16*)0x43001C10UL) /**< \brief (ADC0) Gain Correction */
#define REG_ADC0_OFFSETCORR (*(RwReg16*)0x43001C12UL) /**< \brief (ADC0) Offset Correction */
#define REG_ADC0_SWTRIG (*(RwReg8 *)0x43001C14UL) /**< \brief (ADC0) Software Trigger */
#define REG_ADC0_INTENCLR (*(RwReg8 *)0x43001C2CUL) /**< \brief (ADC0) Interrupt Enable Clear */
#define REG_ADC0_INTENSET (*(RwReg8 *)0x43001C2DUL) /**< \brief (ADC0) Interrupt Enable Set */
#define REG_ADC0_INTFLAG (*(RwReg8 *)0x43001C2EUL) /**< \brief (ADC0) Interrupt Flag Status and Clear */
#define REG_ADC0_STATUS (*(RoReg8 *)0x43001C2FUL) /**< \brief (ADC0) Status */
#define REG_ADC0_SYNCBUSY (*(RoReg *)0x43001C30UL) /**< \brief (ADC0) Synchronization Busy */
#define REG_ADC0_DSEQDATA (*(WoReg *)0x43001C34UL) /**< \brief (ADC0) DMA Sequencial Data */
#define REG_ADC0_DSEQCTRL (*(RwReg *)0x43001C38UL) /**< \brief (ADC0) DMA Sequential Control */
#define REG_ADC0_DSEQSTAT (*(RoReg *)0x43001C3CUL) /**< \brief (ADC0) DMA Sequencial Status */
#define REG_ADC0_RESULT (*(RoReg16*)0x43001C40UL) /**< \brief (ADC0) Result Conversion Value */
#define REG_ADC0_RESS (*(RoReg16*)0x43001C44UL) /**< \brief (ADC0) Last Sample Result */
#define REG_ADC0_CALIB (*(RwReg16*)0x43001C48UL) /**< \brief (ADC0) Calibration */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* ========== Instance parameters for ADC0 peripheral ========== */
#define ADC0_BANDGAP 27 // MUXPOS value to select BANDGAP
#define ADC0_CTAT 29 // MUXPOS value to select CTAT
#define ADC0_DMAC_ID_RESRDY 68 // index of DMA RESRDY trigger
#define ADC0_DMAC_ID_SEQ 69 // Index of DMA SEQ trigger
#define ADC0_EXTCHANNEL_MSB 15 // Number of external channels
#define ADC0_GCLK_ID 40 // index of Generic Clock
#define ADC0_MASTER_SLAVE_MODE 1 // ADC Master/Slave Mode
#define ADC0_OPAMP2 0 // MUXPOS value to select OPAMP2
#define ADC0_OPAMP01 0 // MUXPOS value to select OPAMP01
#define ADC0_PTAT 28 // MUXPOS value to select PTAT
#define ADC0_TOUCH_IMPLEMENTED 1 // TOUCH implemented or not
#endif /* _SAME54_ADC0_INSTANCE_ */