You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
122 lines
2.8 KiB
C
122 lines
2.8 KiB
C
/*
|
|
* Code generated from Atmel Start.
|
|
*
|
|
* This file will be overwritten when reconfiguring your Atmel Start project.
|
|
* Please copy examples or other code you want to keep to a separate file
|
|
* to avoid losing it when reconfiguring.
|
|
*/
|
|
|
|
#include "driver_examples.h"
|
|
#include "driver_init.h"
|
|
#include "utils.h"
|
|
|
|
/**
|
|
* Example of using EXTERNAL_IRQ_0
|
|
*/
|
|
void EXTERNAL_IRQ_0_example(void)
|
|
{
|
|
}
|
|
|
|
/**
|
|
* Example of using QUAD_SPI_0 to get N25Q256A status value,
|
|
* and check bit 0 which indicate embedded operation is busy or not.
|
|
*/
|
|
void QUAD_SPI_0_example(void)
|
|
{
|
|
uint8_t status = 0xFF;
|
|
struct _qspi_command cmd = {
|
|
.inst_frame.bits.inst_en = 1,
|
|
.inst_frame.bits.data_en = 1,
|
|
.inst_frame.bits.tfr_type = QSPI_READ_ACCESS,
|
|
.instruction = 0x05,
|
|
.buf_len = 1,
|
|
.rx_buf = &status,
|
|
};
|
|
|
|
qspi_sync_enable(&QUAD_SPI_0);
|
|
while (status & (1 << 0)) {
|
|
qspi_sync_serial_run_command(&QUAD_SPI_0, &cmd);
|
|
}
|
|
qspi_sync_deinit(&QUAD_SPI_0);
|
|
}
|
|
|
|
static struct timer_task TIMER_0_task1, TIMER_0_task2;
|
|
/**
|
|
* Example of using TIMER_0.
|
|
*/
|
|
static void TIMER_0_task1_cb(const struct timer_task *const timer_task)
|
|
{
|
|
}
|
|
|
|
static void TIMER_0_task2_cb(const struct timer_task *const timer_task)
|
|
{
|
|
}
|
|
|
|
void TIMER_0_example(void)
|
|
{
|
|
TIMER_0_task1.interval = 100;
|
|
TIMER_0_task1.cb = TIMER_0_task1_cb;
|
|
TIMER_0_task1.mode = TIMER_TASK_REPEAT;
|
|
TIMER_0_task2.interval = 200;
|
|
TIMER_0_task2.cb = TIMER_0_task2_cb;
|
|
TIMER_0_task2.mode = TIMER_TASK_REPEAT;
|
|
|
|
timer_add_task(&TIMER_0, &TIMER_0_task1);
|
|
timer_add_task(&TIMER_0, &TIMER_0_task2);
|
|
timer_start(&TIMER_0);
|
|
}
|
|
|
|
/**
|
|
* Example of using USART_0 to write "Hello World" using the IO abstraction.
|
|
*/
|
|
void USART_0_example(void)
|
|
{
|
|
struct io_descriptor *io;
|
|
usart_sync_get_io_descriptor(&USART_0, &io);
|
|
usart_sync_enable(&USART_0);
|
|
|
|
io_write(io, (uint8_t *)"Hello World!", 12);
|
|
}
|
|
|
|
void I2C_0_example(void)
|
|
{
|
|
struct io_descriptor *I2C_0_io;
|
|
|
|
i2c_m_sync_get_io_descriptor(&I2C_0, &I2C_0_io);
|
|
i2c_m_sync_enable(&I2C_0);
|
|
i2c_m_sync_set_slaveaddr(&I2C_0, 0x12, I2C_M_SEVEN);
|
|
io_write(I2C_0_io, (uint8_t *)"Hello World!", 12);
|
|
}
|
|
|
|
void delay_example(void)
|
|
{
|
|
delay_ms(5000);
|
|
}
|
|
|
|
static struct timer_task TIMER_1_task1, TIMER_1_task2;
|
|
|
|
/**
|
|
* Example of using TIMER_1.
|
|
*/
|
|
static void TIMER_1_task1_cb(const struct timer_task *const timer_task)
|
|
{
|
|
}
|
|
|
|
static void TIMER_1_task2_cb(const struct timer_task *const timer_task)
|
|
{
|
|
}
|
|
|
|
void TIMER_1_example(void)
|
|
{
|
|
TIMER_1_task1.interval = 100;
|
|
TIMER_1_task1.cb = TIMER_1_task1_cb;
|
|
TIMER_1_task1.mode = TIMER_TASK_REPEAT;
|
|
TIMER_1_task2.interval = 200;
|
|
TIMER_1_task2.cb = TIMER_1_task2_cb;
|
|
TIMER_1_task2.mode = TIMER_TASK_REPEAT;
|
|
|
|
timer_add_task(&TIMER_1, &TIMER_1_task1);
|
|
timer_add_task(&TIMER_1, &TIMER_1_task2);
|
|
timer_start(&TIMER_1);
|
|
}
|