Development board for the embedded graphics repo
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 

7308 lines
689 KiB

(kicad_pcb (version 20171130) (host pcbnew 5.1.8)
(general
(thickness 1.6)
(drawings 41)
(tracks 1680)
(zones 0)
(modules 43)
(nets 91)
)
(page A4)
(layers
(0 F.Cu signal)
(1 In1.Cu power)
(2 In2.Cu power)
(31 B.Cu signal)
(32 B.Adhes user)
(33 F.Adhes user)
(34 B.Paste user)
(35 F.Paste user)
(36 B.SilkS user)
(37 F.SilkS user)
(38 B.Mask user)
(39 F.Mask user)
(40 Dwgs.User user)
(41 Cmts.User user)
(42 Eco1.User user)
(43 Eco2.User user)
(44 Edge.Cuts user)
(45 Margin user)
(46 B.CrtYd user)
(47 F.CrtYd user)
(48 B.Fab user)
(49 F.Fab user)
)
(setup
(last_trace_width 0.25)
(trace_clearance 0.1778)
(zone_clearance 0.254)
(zone_45_only no)
(trace_min 0.2)
(via_size 0.8)
(via_drill 0.4)
(via_min_size 0.4)
(via_min_drill 0.3)
(uvia_size 0.3)
(uvia_drill 0.1)
(uvias_allowed no)
(uvia_min_size 0.2)
(uvia_min_drill 0.1)
(edge_width 0.05)
(segment_width 0.2)
(pcb_text_width 0.3)
(pcb_text_size 1.5 1.5)
(mod_edge_width 0.12)
(mod_text_size 1 1)
(mod_text_width 0.15)
(pad_size 2 2)
(pad_drill 1.1)
(pad_to_mask_clearance 0)
(aux_axis_origin 0 0)
(visible_elements 7FFFFFFF)
(pcbplotparams
(layerselection 0x010f0_ffffffff)
(usegerberextensions true)
(usegerberattributes true)
(usegerberadvancedattributes true)
(creategerberjobfile false)
(excludeedgelayer false)
(linewidth 0.100000)
(plotframeref false)
(viasonmask false)
(mode 1)
(useauxorigin false)
(hpglpennumber 1)
(hpglpenspeed 20)
(hpglpendiameter 15.000000)
(psnegative false)
(psa4output false)
(plotreference true)
(plotvalue true)
(plotinvisibletext false)
(padsonsilk false)
(subtractmaskfromsilk false)
(outputformat 1)
(mirror false)
(drillshape 0)
(scaleselection 1)
(outputdirectory "gerbers/"))
)
(net 0 "")
(net 1 GND)
(net 2 +5V)
(net 3 /VBUS_USB_RAW)
(net 4 /VCC_MCU_VDDCORE)
(net 5 +3V3)
(net 6 /VCC_MCU_VDDANA)
(net 7 "Net-(C6-Pad1)")
(net 8 /~RESET)
(net 9 /XOUT32)
(net 10 /XIN32)
(net 11 "Net-(D1-Pad2)")
(net 12 /USB_DM)
(net 13 /USB_DP)
(net 14 "Net-(J1-Pad6)")
(net 15 /DBG_TX)
(net 16 /DBG_RX)
(net 17 /SWDIO)
(net 18 /SWCLK)
(net 19 /SWO)
(net 20 /~TFT_cRST)
(net 21 /TFT_D23)
(net 22 /TFT_D21)
(net 23 /TFT_D19)
(net 24 /TFT_D17)
(net 25 /TFT_D15)
(net 26 /TFT_D13)
(net 27 /TFT_D11)
(net 28 /TFT_D9)
(net 29 /TFT_D7)
(net 30 /TFT_D5)
(net 31 /TFT_D3)
(net 32 /TFT_D1)
(net 33 /TFT_TE)
(net 34 /TFT_WR)
(net 35 /TFT_DC)
(net 36 /TFT_GPIO)
(net 37 /I2C_SDA)
(net 38 /TFT_WAKE)
(net 39 /TFT_STANDBY)
(net 40 /TFT_D22)
(net 41 /TFT_D20)
(net 42 /TFT_D18)
(net 43 /TFT_D16)
(net 44 /TFT_D14)
(net 45 /TFT_D12)
(net 46 /TFT_D10)
(net 47 /TFT_D8)
(net 48 /TFT_D6)
(net 49 /TFT_D4)
(net 50 /TFT_D2)
(net 51 /TFT_D0)
(net 52 /TFT_RD)
(net 53 /~TFT_CS)
(net 54 /~TFT_RST)
(net 55 /TOUCH_INT)
(net 56 /I2C_SCL)
(net 57 /SD_CD)
(net 58 /SD_MISO)
(net 59 /SD_SCK)
(net 60 /SD_MOSI)
(net 61 /~SD_CS)
(net 62 /DEV_GPIO_10)
(net 63 /DEV_GPIO_9)
(net 64 /DEV_GPIO_8)
(net 65 /DEV_GPIO_7)
(net 66 /DEV_GPIO_6)
(net 67 /DEV_GPIO_5)
(net 68 /DEV_GPIO_4)
(net 69 /DEV_GPIO_3)
(net 70 /DEV_GPIO_2)
(net 71 /DEV_GPIO_1)
(net 72 /DEV_GPIO_20)
(net 73 /DEV_GPIO_19)
(net 74 /DEV_GPIO_18)
(net 75 /DEV_GPIO_17)
(net 76 /DEV_GPIO_16)
(net 77 /DEV_GPIO_15)
(net 78 /DEV_GPIO_14)
(net 79 /DEV_GPIO_13)
(net 80 /DEV_GPIO_12)
(net 81 /DEV_GPIO_11)
(net 82 /DEV_GPIO_27)
(net 83 /DEV_GPIO_26)
(net 84 /DEV_GPIO_25)
(net 85 /DEV_GPIO_24)
(net 86 /DEV_GPIO_23)
(net 87 /DEV_GPIO_22)
(net 88 /DEV_GPIO_21)
(net 89 /VCC_MCU_VSW)
(net 90 "Net-(R2-Pad2)")
(net_class Default "This is the default net class."
(clearance 0.1778)
(trace_width 0.25)
(via_dia 0.8)
(via_drill 0.4)
(uvia_dia 0.3)
(uvia_drill 0.1)
(add_net /DBG_RX)
(add_net /DBG_TX)
(add_net /DEV_GPIO_1)
(add_net /DEV_GPIO_10)
(add_net /DEV_GPIO_11)
(add_net /DEV_GPIO_12)
(add_net /DEV_GPIO_13)
(add_net /DEV_GPIO_14)
(add_net /DEV_GPIO_15)
(add_net /DEV_GPIO_16)
(add_net /DEV_GPIO_17)
(add_net /DEV_GPIO_18)
(add_net /DEV_GPIO_19)
(add_net /DEV_GPIO_2)
(add_net /DEV_GPIO_20)
(add_net /DEV_GPIO_21)
(add_net /DEV_GPIO_22)
(add_net /DEV_GPIO_23)
(add_net /DEV_GPIO_24)
(add_net /DEV_GPIO_25)
(add_net /DEV_GPIO_26)
(add_net /DEV_GPIO_27)
(add_net /DEV_GPIO_3)
(add_net /DEV_GPIO_4)
(add_net /DEV_GPIO_5)
(add_net /DEV_GPIO_6)
(add_net /DEV_GPIO_7)
(add_net /DEV_GPIO_8)
(add_net /DEV_GPIO_9)
(add_net /I2C_SCL)
(add_net /I2C_SDA)
(add_net /SD_CD)
(add_net /SD_MISO)
(add_net /SD_MOSI)
(add_net /SD_SCK)
(add_net /SWCLK)
(add_net /SWDIO)
(add_net /SWO)
(add_net /TFT_D0)
(add_net /TFT_D1)
(add_net /TFT_D10)
(add_net /TFT_D11)
(add_net /TFT_D12)
(add_net /TFT_D13)
(add_net /TFT_D14)
(add_net /TFT_D15)
(add_net /TFT_D16)
(add_net /TFT_D17)
(add_net /TFT_D18)
(add_net /TFT_D19)
(add_net /TFT_D2)
(add_net /TFT_D20)
(add_net /TFT_D21)
(add_net /TFT_D22)
(add_net /TFT_D23)
(add_net /TFT_D3)
(add_net /TFT_D4)
(add_net /TFT_D5)
(add_net /TFT_D6)
(add_net /TFT_D7)
(add_net /TFT_D8)
(add_net /TFT_D9)
(add_net /TFT_DC)
(add_net /TFT_GPIO)
(add_net /TFT_RD)
(add_net /TFT_STANDBY)
(add_net /TFT_TE)
(add_net /TFT_WAKE)
(add_net /TFT_WR)
(add_net /TOUCH_INT)
(add_net /USB_DM)
(add_net /USB_DP)
(add_net /VCC_MCU_VDDANA)
(add_net /VCC_MCU_VDDCORE)
(add_net /VCC_MCU_VSW)
(add_net /XIN0)
(add_net /XIN32)
(add_net /XOUT0)
(add_net /XOUT32)
(add_net /~RESET)
(add_net /~SD_CS)
(add_net /~TFT_CS)
(add_net /~TFT_RST)
(add_net /~TFT_cRST)
(add_net GND)
(add_net "Net-(D1-Pad2)")
(add_net "Net-(J1-Pad4)")
(add_net "Net-(J1-Pad6)")
(add_net "Net-(J4-Pad40)")
(add_net "Net-(R2-Pad2)")
(add_net "Net-(U2-Pad20)")
(add_net "Net-(U2-Pad47)")
(add_net "Net-(U2-Pad87)")
(add_net "Net-(X1-Pad1)")
(add_net "Net-(X1-Pad8)")
(add_net "Net-(X1-PadCD2)")
)
(net_class Power ""
(clearance 0.1778)
(trace_width 0.5)
(via_dia 0.889)
(via_drill 0.4064)
(uvia_dia 0.3)
(uvia_drill 0.1)
(add_net +3V3)
(add_net +5V)
(add_net /VBUS_USB_RAW)
(add_net "Net-(C6-Pad1)")
)
(module plib:DebugEdge_TARGET (layer F.Cu) (tedit 5F47DF5F) (tstamp 5FC4D587)
(at 103.378 70.358 180)
(path /5FEBC46D)
(fp_text reference J3 (at -5.5 -2.5 270) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value Conn_ARM_SWD_10_DEBUG (at 0 2 180) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 5 0.5) (end 5 -5) (layer B.CrtYd) (width 0.05))
(fp_line (start -5 0.5) (end 5 0.5) (layer B.CrtYd) (width 0.05))
(fp_line (start -5 -5) (end -5 0.5) (layer B.CrtYd) (width 0.05))
(fp_line (start 5 -5) (end -5 -5) (layer B.CrtYd) (width 0.05))
(fp_line (start -5 0.5) (end -5 -5) (layer F.CrtYd) (width 0.05))
(fp_line (start 5 0.5) (end -5 0.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 5 -5) (end 5 0.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -5 -5) (end 5 -5) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.7 0) (end 5 0) (layer Edge.Cuts) (width 0.05))
(fp_line (start -5 0) (end -1.3 0) (layer Edge.Cuts) (width 0.05))
(fp_line (start -0.7 -2.8) (end -0.7 0) (layer Edge.Cuts) (width 0.05))
(fp_line (start -1.3 0) (end -1.3 -2.8) (layer Edge.Cuts) (width 0.05))
(fp_line (start -2 -0.25) (end -2.75 -0.25) (layer F.SilkS) (width 0.12))
(fp_line (start -2.75 -0.25) (end -2.75 -1) (layer F.SilkS) (width 0.12))
(fp_arc (start -1 -2.8) (end -1.3 -2.8) (angle 180) (layer Edge.Cuts) (width 0.05))
(pad 4 smd rect (at 0 -2.5) (size 1 4) (layers B.Cu B.Mask)
(net 18 /SWCLK))
(pad 8 smd rect (at -4 -2.5) (size 1 4) (layers B.Cu B.Mask)
(net 16 /DBG_RX))
(pad 3 smd rect (at -2 -2.5) (size 1 4) (layers B.Cu B.Mask)
(net 1 GND))
(pad 6 smd rect (at 2 -2.5) (size 1 4) (layers B.Cu B.Mask)
(net 19 /SWO))
(pad 10 smd rect (at 4 -2.5) (size 1 4) (layers B.Cu B.Mask)
(net 8 /~RESET))
(pad 7 smd rect (at -4 -2.5) (size 1 4) (layers F.Cu F.Mask)
(net 15 /DBG_TX))
(pad 1 smd rect (at -2 -2.5) (size 1 4) (layers F.Cu F.Mask)
(net 5 +3V3))
(pad 2 smd rect (at 0 -2.5) (size 1 4) (layers F.Cu F.Mask)
(net 17 /SWDIO))
(pad 5 smd rect (at 2 -2.5) (size 1 4) (layers F.Cu F.Mask)
(net 1 GND))
(pad 9 smd rect (at 4 -2.5) (size 1 4) (layers F.Cu F.Mask)
(net 1 GND))
)
(module Package_TO_SOT_SMD:TO-252-3_TabPin2 (layer F.Cu) (tedit 5A70F30B) (tstamp 5FD2C6F1)
(at 113.284 82.042 90)
(descr "TO-252 / DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/")
(tags "DPAK TO-252 DPAK-3 TO-252-3 SOT-428")
(path /5F88D7AD)
(attr smd)
(fp_text reference U1 (at 0 -4.5 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value IFX27001TFV33 (at 0 4.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 3.95 -2.7) (end 4.95 -2.7) (layer F.Fab) (width 0.1))
(fp_line (start 4.95 -2.7) (end 4.95 2.7) (layer F.Fab) (width 0.1))
(fp_line (start 4.95 2.7) (end 3.95 2.7) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 -3.25) (end 3.95 3.25) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 3.25) (end -2.27 3.25) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 3.25) (end -2.27 -2.25) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 -2.25) (end -1.27 -3.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -3.25) (end 3.95 -3.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.865 -2.655) (end -4.97 -2.655) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -2.655) (end -4.97 -1.905) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -1.905) (end -2.27 -1.905) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 -0.375) (end -4.97 -0.375) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -0.375) (end -4.97 0.375) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 0.375) (end -2.27 0.375) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 1.905) (end -4.97 1.905) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 1.905) (end -4.97 2.655) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 2.655) (end -2.27 2.655) (layer F.Fab) (width 0.1))
(fp_line (start -0.97 -3.45) (end -2.47 -3.45) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 -3.45) (end -2.47 -3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 -3.18) (end -5.3 -3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -0.97 3.45) (end -2.47 3.45) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 3.45) (end -2.47 3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 3.18) (end -3.57 3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -5.55 -3.5) (end -5.55 3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 3.5) (end 5.55 3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.55 3.5) (end 5.55 -3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.55 -3.5) (end -5.55 -3.5) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad "" smd rect (at 0.425 1.525 90) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 3.775 -1.525 90) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 0.425 -1.525 90) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 3.775 1.525 90) (size 3.05 2.75) (layers F.Paste))
(pad 2 smd rect (at 2.1 0 90) (size 6.4 5.8) (layers F.Cu F.Mask)
(net 5 +3V3))
(pad 3 smd rect (at -4.2 2.28 90) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
(net 2 +5V))
(pad 2 smd rect (at -4.2 0 90) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
(net 5 +3V3))
(pad 1 smd rect (at -4.2 -2.28 90) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
(net 1 GND))
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/TO-252-3_TabPin2.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module plib:MICROSD (layer B.Cu) (tedit 0) (tstamp 5FBE7D47)
(at 177.292 91.44 270)
(descr "Courtesy: Adafruit Industries")
(path /5FC4F751)
(fp_text reference X1 (at 1.18 -7.69 270) (layer B.SilkS)
(effects (font (size 0.77216 0.77216) (thickness 0.146304)) (justify left top mirror))
)
(fp_text value MICROSD (at 1.18 -8.833 270) (layer B.Fab)
(effects (font (size 0.38608 0.38608) (thickness 0.04064)) (justify left top mirror))
)
(fp_line (start 14.15 0.1) (end 14.15 -13.25) (layer B.SilkS) (width 0.127))
(fp_line (start 9.1 0.1) (end 14.15 0.1) (layer B.SilkS) (width 0.127))
(fp_line (start 3.15 0.1) (end 6.85 0.1) (layer B.SilkS) (width 0.127))
(fp_line (start -0.05 -0.4) (end -0.05 -12.35) (layer B.SilkS) (width 0.127))
(fp_line (start 0.2 -0.4) (end -0.05 -0.4) (layer B.SilkS) (width 0.127))
(fp_line (start 0.2 0.1) (end 0.2 -0.4) (layer B.SilkS) (width 0.127))
(fp_line (start 0.85 0.1) (end 0.2 0.1) (layer B.SilkS) (width 0.127))
(fp_line (start 11.29 -19.52) (end 11.29 -16.67) (layer B.Fab) (width 0.1))
(fp_line (start 1.14 -20.37) (end 10.44 -20.37) (layer B.Fab) (width 0.1))
(fp_line (start 0.29 -16.72) (end 0.29 -19.52) (layer B.Fab) (width 0.1))
(fp_line (start 1.14 -16.92) (end 10.44 -16.92) (layer B.Fab) (width 0.1))
(fp_line (start 0.29 -15.92) (end 0.29 -16.07) (layer B.Fab) (width 0.1))
(fp_line (start 11.29 -15.42) (end 11.29 -14.12) (layer B.Fab) (width 0.1))
(fp_line (start 1.09 -16.17) (end 10.54 -16.17) (layer B.Fab) (width 0.1))
(fp_line (start 0.34 -14.12) (end 0.34 -15.42) (layer B.Fab) (width 0.1))
(fp_line (start 9.19 -11.17) (end 9.19 -9.82) (layer B.Fab) (width 0.1))
(fp_line (start 8.79 -11.17) (end 9.19 -11.17) (layer B.Fab) (width 0.1))
(fp_line (start 8.79 -9.77) (end 8.79 -11.17) (layer B.Fab) (width 0.1))
(fp_line (start 8.09 -10.82) (end 8.09 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 7.69 -10.82) (end 8.09 -10.82) (layer B.Fab) (width 0.1))
(fp_line (start 7.69 -9.77) (end 7.69 -10.82) (layer B.Fab) (width 0.1))
(fp_line (start 6.99 -11.22) (end 6.99 -9.82) (layer B.Fab) (width 0.1))
(fp_line (start 6.59 -11.22) (end 6.99 -11.22) (layer B.Fab) (width 0.1))
(fp_line (start 6.59 -9.77) (end 6.59 -11.22) (layer B.Fab) (width 0.1))
(fp_line (start 5.89 -11.37) (end 5.54 -11.37) (layer B.Fab) (width 0.1))
(fp_line (start 5.89 -9.92) (end 5.89 -11.37) (layer B.Fab) (width 0.1))
(fp_line (start 6.24 -9.92) (end 6.24 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 5.89 -9.92) (end 6.24 -9.92) (layer B.Fab) (width 0.1))
(fp_line (start 5.49 -9.92) (end 5.89 -9.92) (layer B.Fab) (width 0.1))
(fp_line (start 4.79 -11.22) (end 4.79 -9.92) (layer B.Fab) (width 0.1))
(fp_line (start 4.39 -11.22) (end 4.79 -11.22) (layer B.Fab) (width 0.1))
(fp_line (start 4.39 -9.77) (end 4.39 -11.22) (layer B.Fab) (width 0.1))
(fp_line (start 3.74 -11.42) (end 3.74 -9.97) (layer B.Fab) (width 0.1))
(fp_line (start 3.29 -11.42) (end 3.74 -11.42) (layer B.Fab) (width 0.1))
(fp_line (start 3.29 -9.97) (end 3.29 -11.42) (layer B.Fab) (width 0.1))
(fp_line (start 4.04 -9.97) (end 4.04 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 3.74 -9.97) (end 4.04 -9.97) (layer B.Fab) (width 0.1))
(fp_line (start 3.29 -9.97) (end 3.74 -9.97) (layer B.Fab) (width 0.1))
(fp_line (start 2.94 -9.97) (end 3.29 -9.97) (layer B.Fab) (width 0.1))
(fp_line (start 2.94 -9.77) (end 2.94 -9.97) (layer B.Fab) (width 0.1))
(fp_line (start 2.59 -11.17) (end 2.59 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 2.19 -11.17) (end 2.59 -11.17) (layer B.Fab) (width 0.1))
(fp_line (start 2.19 -9.77) (end 2.19 -11.17) (layer B.Fab) (width 0.1))
(fp_line (start 1.49 -11.17) (end 1.49 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 1.09 -11.17) (end 1.49 -11.17) (layer B.Fab) (width 0.1))
(fp_line (start 1.09 -9.82) (end 1.09 -11.17) (layer B.Fab) (width 0.1))
(fp_line (start 8.39 -0.77) (end 8.39 -0.17) (layer B.Fab) (width 0.1))
(fp_line (start 8.29 -0.77) (end 8.39 -0.77) (layer B.Fab) (width 0.1))
(fp_line (start 7.19 -0.77) (end 7.19 -0.17) (layer B.Fab) (width 0.1))
(fp_line (start 7.39 -0.77) (end 7.19 -0.77) (layer B.Fab) (width 0.1))
(fp_line (start 8.29 -0.92) (end 8.54 -0.92) (layer B.Fab) (width 0.1))
(fp_line (start 7.39 -0.92) (end 7.09 -0.92) (layer B.Fab) (width 0.1))
(fp_line (start 7.14 -5.92) (end 8.44 -5.92) (layer B.Fab) (width 0.1))
(fp_line (start 7.39 -0.47) (end 7.14 -5.92) (layer B.Fab) (width 0.1))
(fp_line (start 7.39 -0.42) (end 7.39 -0.47) (layer B.Fab) (width 0.1))
(fp_line (start 7.59 -1.27) (end 7.59 -0.32) (layer B.Fab) (width 0.1))
(fp_line (start 7.79 -1.52) (end 7.84 -1.52) (layer B.Fab) (width 0.1))
(fp_line (start 8.04 -0.32) (end 8.04 -1.27) (layer B.Fab) (width 0.1))
(fp_line (start 8.24 -0.57) (end 8.24 -0.52) (layer B.Fab) (width 0.1))
(fp_line (start 8.44 -5.92) (end 8.24 -0.57) (layer B.Fab) (width 0.1))
(fp_line (start 8.74 -5.87) (end 8.74 -5.92) (layer B.Fab) (width 0.1))
(fp_line (start 8.49 0.03) (end 8.74 -5.87) (layer B.Fab) (width 0.1))
(fp_line (start 7.14 -0.12) (end 8.49 -0.12) (layer B.Fab) (width 0.1))
(fp_line (start 6.84 -5.92) (end 7.09 0.03) (layer B.Fab) (width 0.1))
(fp_line (start 2.69 -0.77) (end 2.69 -0.17) (layer B.Fab) (width 0.1))
(fp_line (start 2.59 -0.77) (end 2.69 -0.77) (layer B.Fab) (width 0.1))
(fp_line (start 1.49 -0.77) (end 1.49 -0.17) (layer B.Fab) (width 0.1))
(fp_line (start 1.69 -0.77) (end 1.49 -0.77) (layer B.Fab) (width 0.1))
(fp_line (start 2.59 -0.92) (end 2.84 -0.92) (layer B.Fab) (width 0.1))
(fp_line (start 1.69 -0.92) (end 1.39 -0.92) (layer B.Fab) (width 0.1))
(fp_line (start 1.44 -5.92) (end 2.74 -5.92) (layer B.Fab) (width 0.1))
(fp_line (start 1.69 -0.47) (end 1.44 -5.92) (layer B.Fab) (width 0.1))
(fp_line (start 1.69 -0.42) (end 1.69 -0.47) (layer B.Fab) (width 0.1))
(fp_line (start 1.89 -1.27) (end 1.89 -0.32) (layer B.Fab) (width 0.1))
(fp_line (start 2.09 -1.52) (end 2.14 -1.52) (layer B.Fab) (width 0.1))
(fp_line (start 2.34 -0.32) (end 2.34 -1.27) (layer B.Fab) (width 0.1))
(fp_line (start 2.54 -0.57) (end 2.54 -0.52) (layer B.Fab) (width 0.1))
(fp_line (start 2.74 -5.92) (end 2.54 -0.57) (layer B.Fab) (width 0.1))
(fp_line (start 3.04 -5.87) (end 3.04 -5.92) (layer B.Fab) (width 0.1))
(fp_line (start 2.79 0.03) (end 3.04 -5.87) (layer B.Fab) (width 0.1))
(fp_line (start 1.44 -0.12) (end 2.79 -0.12) (layer B.Fab) (width 0.1))
(fp_line (start 1.14 -5.92) (end 1.39 0.03) (layer B.Fab) (width 0.1))
(fp_line (start 9.99 -6.37) (end 9.99 -3.87) (layer B.Fab) (width 0.1))
(fp_line (start 10.24 -6.57) (end 10.19 -6.57) (layer B.Fab) (width 0.1))
(fp_line (start 10.49 -3.87) (end 10.49 -6.32) (layer B.Fab) (width 0.1))
(fp_line (start 10.19 -3.67) (end 10.29 -3.67) (layer B.Fab) (width 0.1))
(fp_line (start 0.94 -11.22) (end 0.94 -10.12) (layer B.Fab) (width 0.1))
(fp_line (start 4.49 -11.57) (end 1.29 -11.57) (layer B.Fab) (width 0.1))
(fp_line (start 4.84 -10.02) (end 4.84 -11.22) (layer B.Fab) (width 0.1))
(fp_line (start 4.39 -9.77) (end 4.59 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 4.04 -9.77) (end 4.39 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 2.94 -9.77) (end 4.04 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 2.59 -9.77) (end 2.94 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 2.19 -9.77) (end 2.59 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 1.49 -9.77) (end 2.19 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 1.29 -9.77) (end 1.49 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 5.44 -11.22) (end 5.44 -10.07) (layer B.Fab) (width 0.1))
(fp_line (start 8.99 -11.57) (end 5.79 -11.57) (layer B.Fab) (width 0.1))
(fp_line (start 9.34 -10.07) (end 9.34 -11.22) (layer B.Fab) (width 0.1))
(fp_line (start 8.79 -9.77) (end 9.04 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 8.09 -9.77) (end 8.79 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 7.69 -9.77) (end 8.09 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 6.59 -9.77) (end 7.69 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 6.24 -9.77) (end 6.59 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 5.74 -9.77) (end 6.24 -9.77) (layer B.Fab) (width 0.1))
(fp_line (start 11.94 -6.47) (end 14.04 -6.47) (layer B.Fab) (width 0.1))
(fp_line (start 11.59 -8.12) (end 11.59 -6.82) (layer B.Fab) (width 0.1))
(fp_line (start 11.84 -8.37) (end 11.64 -8.17) (layer B.Fab) (width 0.1))
(fp_line (start 11.84 -12.32) (end 11.84 -8.37) (layer B.Fab) (width 0.1))
(fp_line (start 12.09 -12.52) (end 12.04 -12.52) (layer B.Fab) (width 0.1))
(fp_line (start 12.44 -8.17) (end 12.29 -12.32) (layer B.Fab) (width 0.1))
(fp_line (start 12.19 -7.97) (end 12.24 -7.97) (layer B.Fab) (width 0.1))
(fp_line (start 12.04 -7.02) (end 12.04 -7.82) (layer B.Fab) (width 0.1))
(fp_line (start 13.24 -6.87) (end 12.19 -6.87) (layer B.Fab) (width 0.1))
(fp_line (start 13.39 -7.72) (end 13.39 -7.02) (layer B.Fab) (width 0.1))
(fp_line (start 13.09 -12.32) (end 12.99 -8.12) (layer B.Fab) (width 0.1))
(fp_line (start 14.04 -12.52) (end 13.29 -12.52) (layer B.Fab) (width 0.1))
(fp_line (start 13.74 -14.17) (end 13.79 -14.17) (layer B.Fab) (width 0.1))
(fp_line (start 13.59 -14.62) (end 13.59 -14.32) (layer B.Fab) (width 0.1))
(fp_line (start 13.79 -14.77) (end 13.74 -14.77) (layer B.Fab) (width 0.1))
(fp_line (start 13.94 -15.02) (end 13.94 -14.92) (layer B.Fab) (width 0.1))
(fp_line (start 13.34 -13.82) (end 13.34 -15.12) (layer B.Fab) (width 0.1))
(fp_line (start 13.64 -13.67) (end 13.64 -13.47) (layer B.Fab) (width 0.1))
(fp_line (start 13.64 -13.67) (end 13.79 -13.67) (layer B.Fab) (width 0.1))
(fp_line (start 12.99 -13.67) (end 13.64 -13.67) (layer B.Fab) (width 0.1))
(fp_line (start 13.79 -13.47) (end 13.79 -13.67) (layer B.Fab) (width 0.1))
(fp_line (start 11.34 -14.52) (end 10.84 -13.97) (layer B.Fab) (width 0.1))
(fp_line (start 11.54 -14.52) (end 11.34 -14.52) (layer B.Fab) (width 0.1))
(fp_line (start 11.49 -15.07) (end 11.34 -14.92) (layer B.Fab) (width 0.1))
(fp_line (start 10.49 -14.92) (end 11.34 -14.92) (layer B.Fab) (width 0.1))
(fp_line (start 10.99 -14.72) (end 10.49 -14.72) (layer B.Fab) (width 0.1))
(fp_line (start 10.99 -14.72) (end 11.49 -14.72) (layer B.Fab) (width 0.1))
(fp_line (start 10.49 -14.22) (end 10.99 -14.72) (layer B.Fab) (width 0.1))
(fp_line (start 10.49 -13.87) (end 10.49 -14.22) (layer B.Fab) (width 0.1))
(fp_line (start 10.49 -14.52) (end 10.74 -14.52) (layer B.Fab) (width 0.1))
(fp_line (start 10.49 -14.72) (end 10.49 -14.52) (layer B.Fab) (width 0.1))
(fp_line (start 10.49 -14.92) (end 10.49 -14.72) (layer B.Fab) (width 0.1))
(fp_line (start 10.49 -15.12) (end 10.49 -14.92) (layer B.Fab) (width 0.1))
(fp_line (start 9.54 -15.12) (end 9.54 -13.62) (layer B.Fab) (width 0.1))
(fp_line (start 10.49 -15.12) (end 9.54 -15.12) (layer B.Fab) (width 0.1))
(fp_line (start 11.79 -15.12) (end 10.49 -15.12) (layer B.Fab) (width 0.1))
(fp_line (start 14.04 -2.32) (end 14.04 0.03) (layer B.Fab) (width 0.1))
(fp_line (start 14.09 -2.32) (end 14.04 -2.32) (layer B.Fab) (width 0.1))
(fp_line (start 14.09 -3.37) (end 14.09 -2.32) (layer B.Fab) (width 0.1))
(fp_line (start 14.04 -3.37) (end 14.09 -3.37) (layer B.Fab) (width 0.1))
(fp_line (start 14.04 -6.47) (end 14.04 -3.37) (layer B.Fab) (width 0.1))
(fp_line (start 14.04 -7.52) (end 14.04 -6.47) (layer B.Fab) (width 0.1))
(fp_line (start 14.09 -7.52) (end 14.04 -7.52) (layer B.Fab) (width 0.1))
(fp_line (start 14.09 -8.57) (end 14.09 -7.52) (layer B.Fab) (width 0.1))
(fp_line (start 14.04 -8.57) (end 14.09 -8.57) (layer B.Fab) (width 0.1))
(fp_line (start 14.04 -11.52) (end 14.04 -8.57) (layer B.Fab) (width 0.1))
(fp_line (start 14.09 -11.52) (end 14.04 -11.52) (layer B.Fab) (width 0.1))
(fp_line (start 14.09 -12.52) (end 14.09 -11.52) (layer B.Fab) (width 0.1))
(fp_line (start 14.04 -12.52) (end 14.09 -12.52) (layer B.Fab) (width 0.1))
(fp_line (start 14.04 -13.42) (end 14.04 -12.52) (layer B.Fab) (width 0.1))
(fp_line (start 13.14 -13.42) (end 14.04 -13.42) (layer B.Fab) (width 0.1))
(fp_line (start 13.34 -13.82) (end 13.14 -13.82) (layer B.Fab) (width 0.1))
(fp_line (start 13.74 -13.82) (end 13.34 -13.82) (layer B.Fab) (width 0.1))
(fp_line (start 13.99 -14.87) (end 13.99 -14.07) (layer B.Fab) (width 0.1))
(fp_line (start 13.34 -15.12) (end 13.74 -15.12) (layer B.Fab) (width 0.1))
(fp_line (start 11.79 -15.12) (end 13.34 -15.12) (layer B.Fab) (width 0.1))
(fp_line (start 11.54 -14.52) (end 11.54 -14.87) (layer B.Fab) (width 0.1))
(fp_line (start 11.54 -14.27) (end 11.54 -14.52) (layer B.Fab) (width 0.1))
(fp_line (start 0.04 -9.42) (end 0.04 -14.17) (layer B.Fab) (width 0.1))
(fp_line (start -0.01 -9.42) (end 0.04 -9.42) (layer B.Fab) (width 0.1))
(fp_line (start -0.01 -8.12) (end -0.01 -9.42) (layer B.Fab) (width 0.1))
(fp_line (start 0.04 -8.12) (end -0.01 -8.12) (layer B.Fab) (width 0.1))
(fp_line (start 0.04 -3.07) (end 0.04 -8.12) (layer B.Fab) (width 0.1))
(fp_line (start -0.01 -3.07) (end 0.04 -3.07) (layer B.Fab) (width 0.1))
(fp_line (start -0.01 -1.72) (end -0.01 -3.07) (layer B.Fab) (width 0.1))
(fp_line (start 0.04 -1.72) (end -0.01 -1.72) (layer B.Fab) (width 0.1))
(fp_line (start 0.04 -0.47) (end 0.04 -1.72) (layer B.Fab) (width 0.1))
(fp_line (start 0.29 -0.47) (end 0.04 -0.47) (layer B.Fab) (width 0.1))
(fp_line (start 0.29 0.03) (end 0.29 -0.47) (layer B.Fab) (width 0.1))
(fp_line (start 1.39 0.03) (end 0.29 0.03) (layer B.Fab) (width 0.1))
(fp_line (start 2.79 0.03) (end 1.39 0.03) (layer B.Fab) (width 0.1))
(fp_line (start 10.39 0.03) (end 2.79 0.03) (layer B.Fab) (width 0.1))
(fp_line (start 10.39 -0.27) (end 10.39 0.03) (layer B.Fab) (width 0.1))
(fp_line (start 10.79 0.03) (end 10.79 -0.27) (layer B.Fab) (width 0.1))
(fp_line (start 12.99 0.03) (end 10.79 0.03) (layer B.Fab) (width 0.1))
(fp_line (start 12.99 -0.27) (end 12.99 0.03) (layer B.Fab) (width 0.1))
(fp_line (start 13.39 0.03) (end 13.39 -0.27) (layer B.Fab) (width 0.1))
(fp_line (start 14.04 0.03) (end 13.39 0.03) (layer B.Fab) (width 0.1))
(fp_arc (start 10.44 -19.52) (end 10.44 -20.37) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 1.14 -19.52) (end 0.29 -19.52) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 10.44 -16.07) (end 10.44 -16.92) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 1.14 -16.07) (end 0.29 -16.07) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 10.54 -15.42) (end 10.54 -16.17) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 1.09 -15.42) (end 0.34 -15.42) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 7.54 -0.47) (end 7.59 -0.32) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 7.84 -1.27) (end 7.84 -1.52) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 7.79 -1.27) (end 8.04 -1.27) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 8.04 -0.52) (end 8.24 -0.52) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 8.59 -5.92) (end 8.59 -6.07) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 8.59 -5.92) (end 8.74 -5.92) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 6.99 -5.92) (end 6.99 -6.07) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 6.99 -5.92) (end 7.14 -5.92) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 1.84 -0.47) (end 1.89 -0.32) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 2.14 -1.27) (end 2.14 -1.52) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 2.09 -1.27) (end 2.34 -1.27) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 2.34 -0.52) (end 2.54 -0.52) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 2.89 -5.92) (end 2.89 -6.07) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 2.89 -5.92) (end 3.04 -5.92) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 1.29 -5.92) (end 1.29 -6.07) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 1.29 -5.92) (end 1.44 -5.92) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 10.19 -6.37) (end 10.19 -6.57) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 10.24 -6.32) (end 10.49 -6.32) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 10.29 -3.87) (end 10.29 -3.67) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 10.19 -3.87) (end 9.99 -3.87) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 1.29 -10.12) (end 0.94 -10.12) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 1.29 -11.22) (end 1.29 -11.57) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 4.49 -11.22) (end 4.84 -11.22) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 4.59 -10.02) (end 4.59 -9.77) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 5.74 -10.07) (end 5.44 -10.07) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 5.79 -11.22) (end 5.79 -11.57) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 8.99 -11.22) (end 9.34 -11.22) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 9.04 -10.07) (end 9.04 -9.77) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 11.94 -6.82) (end 11.59 -6.82) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 11.64 -8.12) (end 11.64 -8.17) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 12.04 -12.32) (end 12.04 -12.52) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 12.09 -12.32) (end 12.29 -12.32) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 12.24 -8.17) (end 12.24 -7.97) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 12.19 -7.82) (end 12.04 -7.82) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 12.19 -7.02) (end 12.19 -6.87) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.24 -7.02) (end 13.39 -7.02) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.14 -7.72) (end 13.14 -7.97) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.14 -8.12) (end 12.99 -8.12) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.29 -12.32) (end 13.29 -12.52) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.74 -14.02) (end 13.94 -14.02) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.79 -14.02) (end 13.79 -14.17) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.74 -14.32) (end 13.59 -14.32) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.74 -14.62) (end 13.74 -14.77) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.79 -14.92) (end 13.94 -14.92) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 11.49 -14.92) (end 11.34 -14.92) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.14 -13.62) (end 12.94 -13.62) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.14 -13.62) (end 13.14 -13.82) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.74 -14.07) (end 13.99 -14.07) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.74 -14.87) (end 13.94 -15.02) (angle 36.869898) (layer B.Fab) (width 0.1))
(fp_arc (start 13.739999 -14.869999) (end 13.74 -15.12) (angle 53.130102) (layer B.Fab) (width 0.1))
(fp_arc (start 11.79 -14.87) (end 11.54 -14.87) (angle 90) (layer B.Fab) (width 0.1))
(fp_arc (start 11.44 -14.27) (end 11.44 -14.17) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 5.74 -29.830621) (end 0.04 -14.17) (angle -40) (layer B.Fab) (width 0.1))
(fp_arc (start 10.59 -0.27) (end 10.59 -0.47) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 10.59 -0.27) (end 10.79 -0.27) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.19 -0.27) (end 13.19 -0.47) (angle -90) (layer B.Fab) (width 0.1))
(fp_arc (start 13.19 -0.27) (end 13.39 -0.27) (angle -90) (layer B.Fab) (width 0.1))
(pad 1 smd rect (at 9 -10.64 270) (size 0.7 1.5) (layers B.Cu B.Paste B.Mask)
(solder_mask_margin 0.0508))
(pad 2 smd rect (at 7.9 -10.24 270) (size 0.7 1.5) (layers B.Cu B.Paste B.Mask)
(net 61 /~SD_CS) (solder_mask_margin 0.0508))
(pad 3 smd rect (at 6.8 -10.64 270) (size 0.7 1.5) (layers B.Cu B.Paste B.Mask)
(net 60 /SD_MOSI) (solder_mask_margin 0.0508))
(pad 4 smd rect (at 5.7 -11.04 270) (size 0.7 1.5) (layers B.Cu B.Paste B.Mask)
(net 5 +3V3) (solder_mask_margin 0.0508))
(pad 5 smd rect (at 4.6 -10.64 270) (size 0.7 1.5) (layers B.Cu B.Paste B.Mask)
(net 59 /SD_SCK) (solder_mask_margin 0.0508))
(pad 6 smd rect (at 3.5 -11.04 270) (size 0.7 1.5) (layers B.Cu B.Paste B.Mask)
(net 1 GND) (solder_mask_margin 0.0508))
(pad 7 smd rect (at 2.4 -10.64 270) (size 0.7 1.5) (layers B.Cu B.Paste B.Mask)
(net 58 /SD_MISO) (solder_mask_margin 0.0508))
(pad 8 smd rect (at 1.3 -10.64 270) (size 0.7 1.5) (layers B.Cu B.Paste B.Mask)
(solder_mask_margin 0.0508))
(pad CD2 smd rect (at 8 -0.44 180) (size 1.4 1.8) (layers B.Cu B.Paste B.Mask)
(solder_mask_margin 0.0508))
(pad CD1 smd rect (at 2 -0.44 180) (size 1.4 1.8) (layers B.Cu B.Paste B.Mask)
(net 57 /SD_CD) (solder_mask_margin 0.0508))
(pad MT2 smd rect (at 13.6 -14.44 270) (size 1.4 1.9) (layers B.Cu B.Paste B.Mask)
(net 1 GND) (solder_mask_margin 0.0508))
(pad MT1 smd rect (at 0.4 -13.54 270) (size 1.4 1.9) (layers B.Cu B.Paste B.Mask)
(net 1 GND) (solder_mask_margin 0.0508))
(model ${PENG3D}/1660_v1.step
(offset (xyz 6 -7.5 1))
(scale (xyz 1 1 1))
(rotate (xyz 90 90 0))
)
)
(module Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMD (layer F.Cu) (tedit 5A19A425) (tstamp 5FBD2C50)
(at 186.69 81.026)
(descr "surface-mounted straight socket strip, 2x05, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated")
(tags "Surface mounted socket strip SMD 2x05 2.54mm double row")
(path /60C2016A)
(attr smd)
(fp_text reference J8 (at 0 7.366) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value DEV_IO_2 (at 0 7.85) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.6 -6.41) (end 2.6 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 -6.41) (end 2.6 -5.84) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 -4.32) (end 2.6 -3.3) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 -1.78) (end 2.6 -0.76) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 0.76) (end 2.6 1.78) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 3.3) (end 2.6 4.32) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 5.84) (end 2.6 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 6.41) (end 2.6 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 -6.41) (end -2.6 -5.84) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 -4.32) (end -2.6 -3.3) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 -1.78) (end -2.6 -0.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 0.76) (end -2.6 1.78) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 3.3) (end -2.6 4.32) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 5.84) (end -2.6 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 -5.84) (end 3.96 -5.84) (layer F.SilkS) (width 0.12))
(fp_line (start -2.54 -6.35) (end 1.54 -6.35) (layer F.Fab) (width 0.1))
(fp_line (start 1.54 -6.35) (end 2.54 -5.35) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 -5.35) (end 2.54 6.35) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 6.35) (end -2.54 6.35) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 6.35) (end -2.54 -6.35) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -5.4) (end -2.54 -5.4) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 -4.76) (end -3.92 -4.76) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -4.76) (end -3.92 -5.4) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 -5.4) (end 3.92 -5.4) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -5.4) (end 3.92 -4.76) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -4.76) (end 2.54 -4.76) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -2.86) (end -2.54 -2.86) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 -2.22) (end -3.92 -2.22) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -2.22) (end -3.92 -2.86) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 -2.86) (end 3.92 -2.86) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -2.86) (end 3.92 -2.22) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -2.22) (end 2.54 -2.22) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -0.32) (end -2.54 -0.32) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 0.32) (end -3.92 0.32) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 0.32) (end -3.92 -0.32) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 -0.32) (end 3.92 -0.32) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -0.32) (end 3.92 0.32) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 0.32) (end 2.54 0.32) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 2.22) (end -2.54 2.22) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 2.86) (end -3.92 2.86) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 2.86) (end -3.92 2.22) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 2.22) (end 3.92 2.22) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 2.22) (end 3.92 2.86) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 2.86) (end 2.54 2.86) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 4.76) (end -2.54 4.76) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 5.4) (end -3.92 5.4) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 5.4) (end -3.92 4.76) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 4.76) (end 3.92 4.76) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 4.76) (end 3.92 5.4) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 5.4) (end 2.54 5.4) (layer F.Fab) (width 0.1))
(fp_line (start -4.55 -6.85) (end 4.5 -6.85) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.5 -6.85) (end 4.5 6.85) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.5 6.85) (end -4.55 6.85) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.55 6.85) (end -4.55 -6.85) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 10 smd rect (at -2.52 5.08) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 2 +5V))
(pad 9 smd rect (at 2.52 5.08) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 5 +3V3))
(pad 8 smd rect (at -2.52 2.54) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 1 GND))
(pad 7 smd rect (at 2.52 2.54) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 82 /DEV_GPIO_27))
(pad 6 smd rect (at -2.52 0) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 83 /DEV_GPIO_26))
(pad 5 smd rect (at 2.52 0) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 84 /DEV_GPIO_25))
(pad 4 smd rect (at -2.52 -2.54) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 85 /DEV_GPIO_24))
(pad 3 smd rect (at 2.52 -2.54) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 86 /DEV_GPIO_23))
(pad 2 smd rect (at -2.52 -5.08) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 87 /DEV_GPIO_22))
(pad 1 smd rect (at 2.52 -5.08) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 88 /DEV_GPIO_21))
(model ${KISYS3DMOD}/Connector_PinSocket_2.54mm.3dshapes/PinSocket_2x05_P2.54mm_Vertical_SMD.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMD (layer F.Cu) (tedit 5A19A425) (tstamp 5FBD2C30)
(at 186.69 96.012)
(descr "surface-mounted straight socket strip, 2x05, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated")
(tags "Surface mounted socket strip SMD 2x05 2.54mm double row")
(path /60BF1379)
(attr smd)
(fp_text reference J7 (at 0.254 7.874) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value DEV_IO_1 (at 0 7.85) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.6 -6.41) (end 2.6 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 -6.41) (end 2.6 -5.84) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 -4.32) (end 2.6 -3.3) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 -1.78) (end 2.6 -0.76) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 0.76) (end 2.6 1.78) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 3.3) (end 2.6 4.32) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 5.84) (end 2.6 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 6.41) (end 2.6 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 -6.41) (end -2.6 -5.84) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 -4.32) (end -2.6 -3.3) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 -1.78) (end -2.6 -0.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 0.76) (end -2.6 1.78) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 3.3) (end -2.6 4.32) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 5.84) (end -2.6 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 -5.84) (end 3.96 -5.84) (layer F.SilkS) (width 0.12))
(fp_line (start -2.54 -6.35) (end 1.54 -6.35) (layer F.Fab) (width 0.1))
(fp_line (start 1.54 -6.35) (end 2.54 -5.35) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 -5.35) (end 2.54 6.35) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 6.35) (end -2.54 6.35) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 6.35) (end -2.54 -6.35) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -5.4) (end -2.54 -5.4) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 -4.76) (end -3.92 -4.76) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -4.76) (end -3.92 -5.4) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 -5.4) (end 3.92 -5.4) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -5.4) (end 3.92 -4.76) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -4.76) (end 2.54 -4.76) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -2.86) (end -2.54 -2.86) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 -2.22) (end -3.92 -2.22) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -2.22) (end -3.92 -2.86) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 -2.86) (end 3.92 -2.86) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -2.86) (end 3.92 -2.22) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -2.22) (end 2.54 -2.22) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -0.32) (end -2.54 -0.32) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 0.32) (end -3.92 0.32) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 0.32) (end -3.92 -0.32) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 -0.32) (end 3.92 -0.32) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -0.32) (end 3.92 0.32) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 0.32) (end 2.54 0.32) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 2.22) (end -2.54 2.22) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 2.86) (end -3.92 2.86) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 2.86) (end -3.92 2.22) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 2.22) (end 3.92 2.22) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 2.22) (end 3.92 2.86) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 2.86) (end 2.54 2.86) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 4.76) (end -2.54 4.76) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 5.4) (end -3.92 5.4) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 5.4) (end -3.92 4.76) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 4.76) (end 3.92 4.76) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 4.76) (end 3.92 5.4) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 5.4) (end 2.54 5.4) (layer F.Fab) (width 0.1))
(fp_line (start -4.55 -6.85) (end 4.5 -6.85) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.5 -6.85) (end 4.5 6.85) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.5 6.85) (end -4.55 6.85) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.55 6.85) (end -4.55 -6.85) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 10 smd rect (at -2.52 5.08) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 72 /DEV_GPIO_20))
(pad 9 smd rect (at 2.52 5.08) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 73 /DEV_GPIO_19))
(pad 8 smd rect (at -2.52 2.54) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 74 /DEV_GPIO_18))
(pad 7 smd rect (at 2.52 2.54) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 75 /DEV_GPIO_17))
(pad 6 smd rect (at -2.52 0) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 76 /DEV_GPIO_16))
(pad 5 smd rect (at 2.52 0) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 77 /DEV_GPIO_15))
(pad 4 smd rect (at -2.52 -2.54) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 78 /DEV_GPIO_14))
(pad 3 smd rect (at 2.52 -2.54) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 79 /DEV_GPIO_13))
(pad 2 smd rect (at -2.52 -5.08) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 80 /DEV_GPIO_12))
(pad 1 smd rect (at 2.52 -5.08) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 81 /DEV_GPIO_11))
(model ${KISYS3DMOD}/Connector_PinSocket_2.54mm.3dshapes/PinSocket_2x05_P2.54mm_Vertical_SMD.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMD (layer F.Cu) (tedit 5A19A425) (tstamp 5FBD2C10)
(at 186.69 111.506)
(descr "surface-mounted straight socket strip, 2x05, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated")
(tags "Surface mounted socket strip SMD 2x05 2.54mm double row")
(path /60BA0FC2)
(attr smd)
(fp_text reference J6 (at 0.508 7.62) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value DEV_IO_0 (at 0 7.85) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.6 -6.41) (end 2.6 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 -6.41) (end 2.6 -5.84) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 -4.32) (end 2.6 -3.3) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 -1.78) (end 2.6 -0.76) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 0.76) (end 2.6 1.78) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 3.3) (end 2.6 4.32) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 5.84) (end 2.6 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 6.41) (end 2.6 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 -6.41) (end -2.6 -5.84) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 -4.32) (end -2.6 -3.3) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 -1.78) (end -2.6 -0.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 0.76) (end -2.6 1.78) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 3.3) (end -2.6 4.32) (layer F.SilkS) (width 0.12))
(fp_line (start -2.6 5.84) (end -2.6 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start 2.6 -5.84) (end 3.96 -5.84) (layer F.SilkS) (width 0.12))
(fp_line (start -2.54 -6.35) (end 1.54 -6.35) (layer F.Fab) (width 0.1))
(fp_line (start 1.54 -6.35) (end 2.54 -5.35) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 -5.35) (end 2.54 6.35) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 6.35) (end -2.54 6.35) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 6.35) (end -2.54 -6.35) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -5.4) (end -2.54 -5.4) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 -4.76) (end -3.92 -4.76) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -4.76) (end -3.92 -5.4) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 -5.4) (end 3.92 -5.4) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -5.4) (end 3.92 -4.76) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -4.76) (end 2.54 -4.76) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -2.86) (end -2.54 -2.86) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 -2.22) (end -3.92 -2.22) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -2.22) (end -3.92 -2.86) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 -2.86) (end 3.92 -2.86) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -2.86) (end 3.92 -2.22) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -2.22) (end 2.54 -2.22) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 -0.32) (end -2.54 -0.32) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 0.32) (end -3.92 0.32) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 0.32) (end -3.92 -0.32) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 -0.32) (end 3.92 -0.32) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 -0.32) (end 3.92 0.32) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 0.32) (end 2.54 0.32) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 2.22) (end -2.54 2.22) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 2.86) (end -3.92 2.86) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 2.86) (end -3.92 2.22) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 2.22) (end 3.92 2.22) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 2.22) (end 3.92 2.86) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 2.86) (end 2.54 2.86) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 4.76) (end -2.54 4.76) (layer F.Fab) (width 0.1))
(fp_line (start -2.54 5.4) (end -3.92 5.4) (layer F.Fab) (width 0.1))
(fp_line (start -3.92 5.4) (end -3.92 4.76) (layer F.Fab) (width 0.1))
(fp_line (start 2.54 4.76) (end 3.92 4.76) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 4.76) (end 3.92 5.4) (layer F.Fab) (width 0.1))
(fp_line (start 3.92 5.4) (end 2.54 5.4) (layer F.Fab) (width 0.1))
(fp_line (start -4.55 -6.85) (end 4.5 -6.85) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.5 -6.85) (end 4.5 6.85) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.5 6.85) (end -4.55 6.85) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.55 6.85) (end -4.55 -6.85) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 10 smd rect (at -2.52 5.08) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 62 /DEV_GPIO_10))
(pad 9 smd rect (at 2.52 5.08) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 63 /DEV_GPIO_9))
(pad 8 smd rect (at -2.52 2.54) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 64 /DEV_GPIO_8))
(pad 7 smd rect (at 2.52 2.54) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 65 /DEV_GPIO_7))
(pad 6 smd rect (at -2.52 0) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 66 /DEV_GPIO_6))
(pad 5 smd rect (at 2.52 0) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 67 /DEV_GPIO_5))
(pad 4 smd rect (at -2.52 -2.54) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 68 /DEV_GPIO_4))
(pad 3 smd rect (at 2.52 -2.54) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 69 /DEV_GPIO_3))
(pad 2 smd rect (at -2.52 -5.08) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 70 /DEV_GPIO_2))
(pad 1 smd rect (at 2.52 -5.08) (size 3 1) (layers F.Cu F.Paste F.Mask)
(net 71 /DEV_GPIO_1))
(model ${KISYS3DMOD}/Connector_PinSocket_2.54mm.3dshapes/PinSocket_2x05_P2.54mm_Vertical_SMD.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Crystal:Crystal_SMD_MicroCrystal_MS1V-T1K (layer F.Cu) (tedit 5A1AD604) (tstamp 5FBD2DFE)
(at 159.004 92.456)
(descr "SMD Watch Crystal MicroCrystal MS1V-T1K 6.1mm length 2.0mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/MS1V-T1K.pdf")
(tags ['MS1V-T1K'])
(path /60E2AE1C)
(attr smd)
(fp_text reference Y2 (at -3.02 -2.275 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value Crystal_GND3 (at 3.02 -2.275 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 2.1 -4.63) (end -2.1 -4.63) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.1 4.57) (end 2.1 -4.63) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.1 4.57) (end 2.1 4.57) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.1 -4.63) (end -2.1 4.57) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.27 -2.5) (end 1.27 -2.5) (layer F.SilkS) (width 0.12))
(fp_line (start 0.5 -2.1) (end 1.27 -2.5) (layer F.SilkS) (width 0.12))
(fp_line (start -1.27 -2.5) (end -1.27 -2.5) (layer F.SilkS) (width 0.12))
(fp_line (start -0.5 -2.1) (end -1.27 -2.5) (layer F.SilkS) (width 0.12))
(fp_line (start 1.7 -2.1) (end 1.7 1.6) (layer F.SilkS) (width 0.12))
(fp_line (start -1.7 -2.1) (end 1.7 -2.1) (layer F.SilkS) (width 0.12))
(fp_line (start -1.7 1.6) (end -1.7 -2.1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.27 -2.7) (end 1.27 -3.5) (layer F.Fab) (width 0.1))
(fp_line (start 0.5 -1.9) (end 1.27 -2.7) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -2.7) (end -1.27 -3.5) (layer F.Fab) (width 0.1))
(fp_line (start -0.5 -1.9) (end -1.27 -2.7) (layer F.Fab) (width 0.1))
(fp_line (start 1 -1.9) (end -1 -1.9) (layer F.Fab) (width 0.1))
(fp_line (start 1 4.2) (end 1 -1.9) (layer F.Fab) (width 0.1))
(fp_line (start -1 4.2) (end 1 4.2) (layer F.Fab) (width 0.1))
(fp_line (start -1 -1.9) (end -1 4.2) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0.35) (layer F.Fab)
(effects (font (size 0.6 0.6) (thickness 0.09)))
)
(pad 3 smd rect (at 0 3.05) (size 3 2.5) (layers F.Cu F.Paste F.Mask)
(net 1 GND))
(pad 2 smd rect (at 1.27 -3.5) (size 1 1.6) (layers F.Cu F.Paste F.Mask)
(net 10 /XIN32))
(pad 1 smd rect (at -1.27 -3.5) (size 1 1.6) (layers F.Cu F.Paste F.Mask)
(net 9 /XOUT32))
(model ${KISYS3DMOD}/Crystal.3dshapes/Crystal_SMD_MicroCrystal_MS1V-T1K.wrl
(offset (xyz 0 0.224999996200839 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_QFP:TQFP-100_14x14mm_P0.5mm (layer F.Cu) (tedit 5D9F72B1) (tstamp 5FBD2DCF)
(at 141.224 95.504 45)
(descr "TQFP, 100 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py")
(tags "TQFP QFP")
(path /5FC80879)
(attr smd)
(fp_text reference U2 (at 2.665793 -11.778985 45) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value ATSAME54N19A-A (at 0 9.35 45) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 8.65 6.4) (end 8.65 0) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 6.4) (end 8.65 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 7.25) (end 7.25 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 7.25) (end 7.25 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 8.65) (end 6.4 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 8.65) (end 6.4 8.65) (layer F.CrtYd) (width 0.05))
(fp_line (start -8.65 6.4) (end -8.65 0) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 6.4) (end -8.65 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 7.25) (end -7.25 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 7.25) (end -7.25 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 8.65) (end -6.4 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 8.65) (end -6.4 8.65) (layer F.CrtYd) (width 0.05))
(fp_line (start 8.65 -6.4) (end 8.65 0) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 -6.4) (end 8.65 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 -7.25) (end 7.25 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 -7.25) (end 7.25 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 -8.65) (end 6.4 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 -8.65) (end 6.4 -8.65) (layer F.CrtYd) (width 0.05))
(fp_line (start -8.65 -6.4) (end -8.65 0) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 -6.4) (end -8.65 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 -7.25) (end -7.25 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 -7.25) (end -7.25 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 -8.65) (end -6.4 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 -8.65) (end -6.4 -8.65) (layer F.CrtYd) (width 0.05))
(fp_line (start -7 -6) (end -6 -7) (layer F.Fab) (width 0.1))
(fp_line (start -7 7) (end -7 -6) (layer F.Fab) (width 0.1))
(fp_line (start 7 7) (end -7 7) (layer F.Fab) (width 0.1))
(fp_line (start 7 -7) (end 7 7) (layer F.Fab) (width 0.1))
(fp_line (start -6 -7) (end 7 -7) (layer F.Fab) (width 0.1))
(fp_line (start -7.11 -6.41) (end -8.4 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -7.11 -7.11) (end -7.11 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -6.41 -7.11) (end -7.11 -7.11) (layer F.SilkS) (width 0.12))
(fp_line (start 7.11 -7.11) (end 7.11 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start 6.41 -7.11) (end 7.11 -7.11) (layer F.SilkS) (width 0.12))
(fp_line (start -7.11 7.11) (end -7.11 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -6.41 7.11) (end -7.11 7.11) (layer F.SilkS) (width 0.12))
(fp_line (start 7.11 7.11) (end 7.11 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start 6.41 7.11) (end 7.11 7.11) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 0 0 45) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 100 smd roundrect (at -6 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 31 /TFT_D3))
(pad 99 smd roundrect (at -5.5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 50 /TFT_D2))
(pad 98 smd roundrect (at -5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 32 /TFT_D1))
(pad 97 smd roundrect (at -4.5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 51 /TFT_D0))
(pad 96 smd roundrect (at -4 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 82 /DEV_GPIO_27))
(pad 95 smd roundrect (at -3.5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 19 /SWO))
(pad 94 smd roundrect (at -3 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 17 /SWDIO))
(pad 93 smd roundrect (at -2.5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 18 /SWCLK))
(pad 92 smd roundrect (at -2 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 5 +3V3))
(pad 91 smd roundrect (at -1.5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 89 /VCC_MCU_VSW))
(pad 90 smd roundrect (at -1 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 1 GND))
(pad 89 smd roundrect (at -0.5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 /VCC_MCU_VDDCORE))
(pad 88 smd roundrect (at 0 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 8 /~RESET))
(pad 87 smd roundrect (at 0.5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25))
(pad 86 smd roundrect (at 1 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 83 /DEV_GPIO_26))
(pad 85 smd roundrect (at 1.5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 84 /DEV_GPIO_25))
(pad 84 smd roundrect (at 2 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 85 /DEV_GPIO_24))
(pad 83 smd roundrect (at 2.5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 86 /DEV_GPIO_23))
(pad 82 smd roundrect (at 3 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 87 /DEV_GPIO_22))
(pad 81 smd roundrect (at 3.5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 52 /TFT_RD))
(pad 80 smd roundrect (at 4 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 34 /TFT_WR))
(pad 79 smd roundrect (at 4.5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 21 /TFT_D23))
(pad 78 smd roundrect (at 5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 40 /TFT_D22))
(pad 77 smd roundrect (at 5.5 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 5 +3V3))
(pad 76 smd roundrect (at 6 -7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 1 GND))
(pad 75 smd roundrect (at 7.6625 -6 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 13 /USB_DP))
(pad 74 smd roundrect (at 7.6625 -5.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 12 /USB_DM))
(pad 73 smd roundrect (at 7.6625 -5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 56 /I2C_SCL))
(pad 72 smd roundrect (at 7.6625 -4.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 37 /I2C_SDA))
(pad 71 smd roundrect (at 7.6625 -4 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 66 /DEV_GPIO_6))
(pad 70 smd roundrect (at 7.6625 -3.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 67 /DEV_GPIO_5))
(pad 69 smd roundrect (at 7.6625 -3 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 22 /TFT_D21))
(pad 68 smd roundrect (at 7.6625 -2.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 41 /TFT_D20))
(pad 67 smd roundrect (at 7.6625 -2 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 23 /TFT_D19))
(pad 66 smd roundrect (at 7.6625 -1.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 42 /TFT_D18))
(pad 65 smd roundrect (at 7.6625 -1 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 24 /TFT_D17))
(pad 64 smd roundrect (at 7.6625 -0.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 43 /TFT_D16))
(pad 63 smd roundrect (at 7.6625 0 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 5 +3V3))
(pad 62 smd roundrect (at 7.6625 0.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 1 GND))
(pad 61 smd roundrect (at 7.6625 1 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 88 /DEV_GPIO_21))
(pad 60 smd roundrect (at 7.6625 1.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 72 /DEV_GPIO_20))
(pad 59 smd roundrect (at 7.6625 2 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 61 /~SD_CS))
(pad 58 smd roundrect (at 7.6625 2.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 58 /SD_MISO))
(pad 57 smd roundrect (at 7.6625 3 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 59 /SD_SCK))
(pad 56 smd roundrect (at 7.6625 3.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 60 /SD_MOSI))
(pad 55 smd roundrect (at 7.6625 4 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 68 /DEV_GPIO_4))
(pad 54 smd roundrect (at 7.6625 4.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 69 /DEV_GPIO_3))
(pad 53 smd roundrect (at 7.6625 5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 70 /DEV_GPIO_2))
(pad 52 smd roundrect (at 7.6625 5.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 71 /DEV_GPIO_1))
(pad 51 smd roundrect (at 7.6625 6 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 5 +3V3))
(pad 50 smd roundrect (at 6 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 1 GND))
(pad 49 smd roundrect (at 5.5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25))
(pad 48 smd roundrect (at 5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25))
(pad 47 smd roundrect (at 4.5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25))
(pad 46 smd roundrect (at 4 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 38 /TFT_WAKE))
(pad 45 smd roundrect (at 3.5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 73 /DEV_GPIO_19))
(pad 44 smd roundrect (at 3 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 74 /DEV_GPIO_18))
(pad 43 smd roundrect (at 2.5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 75 /DEV_GPIO_17))
(pad 42 smd roundrect (at 2 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 76 /DEV_GPIO_16))
(pad 41 smd roundrect (at 1.5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 77 /DEV_GPIO_15))
(pad 40 smd roundrect (at 1 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 78 /DEV_GPIO_14))
(pad 39 smd roundrect (at 0.5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 5 +3V3))
(pad 38 smd roundrect (at 0 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 1 GND))
(pad 37 smd roundrect (at -0.5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 25 /TFT_D15))
(pad 36 smd roundrect (at -1 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 44 /TFT_D14))
(pad 35 smd roundrect (at -1.5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 26 /TFT_D13))
(pad 34 smd roundrect (at -2 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 45 /TFT_D12))
(pad 33 smd roundrect (at -2.5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 27 /TFT_D11))
(pad 32 smd roundrect (at -3 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 46 /TFT_D10))
(pad 31 smd roundrect (at -3.5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 1 GND))
(pad 30 smd roundrect (at -4 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 5 +3V3))
(pad 29 smd roundrect (at -4.5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 36 /TFT_GPIO))
(pad 28 smd roundrect (at -5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 39 /TFT_STANDBY))
(pad 27 smd roundrect (at -5.5 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 35 /TFT_DC))
(pad 26 smd roundrect (at -6 7.6625 45) (size 0.3 1.475) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 53 /~TFT_CS))
(pad 25 smd roundrect (at -7.6625 6 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 5 +3V3))
(pad 24 smd roundrect (at -7.6625 5.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 1 GND))
(pad 23 smd roundrect (at -7.6625 5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 79 /DEV_GPIO_13))
(pad 22 smd roundrect (at -7.6625 4.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 80 /DEV_GPIO_12))
(pad 21 smd roundrect (at -7.6625 4 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 81 /DEV_GPIO_11))
(pad 20 smd roundrect (at -7.6625 3.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25))
(pad 19 smd roundrect (at -7.6625 3 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 57 /SD_CD))
(pad 18 smd roundrect (at -7.6625 2.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 16 /DBG_RX))
(pad 17 smd roundrect (at -7.6625 2 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 15 /DBG_TX))
(pad 16 smd roundrect (at -7.6625 1.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 28 /TFT_D9))
(pad 15 smd roundrect (at -7.6625 1 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 47 /TFT_D8))
(pad 14 smd roundrect (at -7.6625 0.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 29 /TFT_D7))
(pad 13 smd roundrect (at -7.6625 0 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 48 /TFT_D6))
(pad 12 smd roundrect (at -7.6625 -0.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 6 /VCC_MCU_VDDANA))
(pad 11 smd roundrect (at -7.6625 -1 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 1 GND))
(pad 10 smd roundrect (at -7.6625 -1.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 30 /TFT_D5))
(pad 9 smd roundrect (at -7.6625 -2 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 49 /TFT_D4))
(pad 8 smd roundrect (at -7.6625 -2.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 33 /TFT_TE))
(pad 7 smd roundrect (at -7.6625 -3 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 55 /TOUCH_INT))
(pad 6 smd roundrect (at -7.6625 -3.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 62 /DEV_GPIO_10))
(pad 5 smd roundrect (at -7.6625 -4 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 63 /DEV_GPIO_9))
(pad 4 smd roundrect (at -7.6625 -4.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 64 /DEV_GPIO_8))
(pad 3 smd roundrect (at -7.6625 -5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 65 /DEV_GPIO_7))
(pad 2 smd roundrect (at -7.6625 -5.5 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 9 /XOUT32))
(pad 1 smd roundrect (at -7.6625 -6 45) (size 1.475 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 10 /XIN32))
(model ${KISYS3DMOD}/Package_QFP.3dshapes/TQFP-100_14x14mm_P0.5mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Button_Switch_THT:SW_PUSH_6mm_H5mm (layer F.Cu) (tedit 5FD2A038) (tstamp 5FBD2D18)
(at 166.37 75.692)
(descr "tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm")
(tags "tact sw push 6mm")
(path /5FCB65E5)
(fp_text reference SW1 (at 3.25 -2) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value ~RST_BTN (at 3.63 -2.192) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 3.25 2.25) (end 1.25 2.5) (layer F.Fab) (width 0.1))
(fp_line (start 6.75 3) (end 6.75 1.5) (layer F.SilkS) (width 0.12))
(fp_line (start 5.5 -1) (end 1 -1) (layer F.SilkS) (width 0.12))
(fp_line (start -0.25 1.5) (end -0.25 3) (layer F.SilkS) (width 0.12))
(fp_line (start 1 5.5) (end 5.5 5.5) (layer F.SilkS) (width 0.12))
(fp_line (start 8 -1.25) (end 8 5.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.75 6) (end -1.25 6) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.5 5.75) (end -1.5 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.25 -1.5) (end 7.75 -1.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.5 6) (end -1.25 6) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.5 5.75) (end -1.5 6) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.5 -1.5) (end -1.25 -1.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.5 -1.25) (end -1.5 -1.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 8 -1.5) (end 8 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.75 -1.5) (end 8 -1.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 8 6) (end 8 5.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.75 6) (end 8 6) (layer F.CrtYd) (width 0.05))
(fp_line (start 0.25 -0.75) (end 3.25 -0.75) (layer F.Fab) (width 0.1))
(fp_line (start 0.25 5.25) (end 0.25 -0.75) (layer F.Fab) (width 0.1))
(fp_line (start 6.25 5.25) (end 0.25 5.25) (layer F.Fab) (width 0.1))
(fp_line (start 6.25 -0.75) (end 6.25 5.25) (layer F.Fab) (width 0.1))
(fp_line (start 3.25 -0.75) (end 6.25 -0.75) (layer F.Fab) (width 0.1))
(fp_text user %R (at 3.25 2.25) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole circle (at 6.5 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask)
(net 90 "Net-(R2-Pad2)"))
(pad 2 thru_hole circle (at 6.5 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask)
(net 1 GND))
(pad 1 thru_hole circle (at 0 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask)
(net 90 "Net-(R2-Pad2)"))
(pad 2 thru_hole circle (at 0 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask)
(net 1 GND))
(model ${KISYS3DMOD}/Button_Switch_THT.3dshapes/SW_PUSH_6mm_H5mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FBD2CD7)
(at 168.148 86.614 180)
(descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
(tags "resistor handsolder")
(path /60244C50)
(attr smd)
(fp_text reference R7 (at 3.048 -0.254) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 330 (at 0 1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1 0 180) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325)
(net 54 /~TFT_RST))
(pad 1 smd roundrect (at -1 0 180) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325)
(net 8 /~RESET))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FBD2CC6)
(at 99.568 87.122 270)
(descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
(tags "resistor handsolder")
(path /5FB93814)
(attr smd)
(fp_text reference R6 (at -2.794 0) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1k (at 0 1.65 270) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0 270) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1 0 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325)
(net 11 "Net-(D1-Pad2)"))
(pad 1 smd roundrect (at -1 0 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325)
(net 5 +3V3))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FBD2CB5)
(at 168.132 88.9 180)
(descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
(tags "resistor handsolder")
(path /60223E50)
(attr smd)
(fp_text reference R5 (at 3.032 0) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 330 (at 0 1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1 0 180) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325)
(net 20 /~TFT_cRST))
(pad 1 smd roundrect (at -1 0 180) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325)
(net 8 /~RESET))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FBD2CA4)
(at 150.114 77.978 270)
(descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
(tags "resistor handsolder")
(path /5FEF5CF6)
(attr smd)
(fp_text reference R4 (at 0 1.65 90) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 4.7k (at 0 -1.65 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.85 -0.95) (end -1.85 -0.95) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.85 0.95) (end 1.85 -0.95) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.85 0.95) (end 1.85 0.95) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.85 -0.95) (end -1.85 0.95) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer B.SilkS) (width 0.12))
(fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer B.SilkS) (width 0.12))
(fp_line (start 1 -0.625) (end -1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start 1 0.625) (end 1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 0.625) (end 1 0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end -1 0.625) (layer B.Fab) (width 0.1))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)) (justify mirror))
)
(pad 2 smd roundrect (at 1 0 270) (size 1.2 1.4) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2083325)
(net 37 /I2C_SDA))
(pad 1 smd roundrect (at -1 0 270) (size 1.2 1.4) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2083325)
(net 5 +3V3))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FBD2C93)
(at 152.654 77.978 270)
(descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
(tags "resistor handsolder")
(path /5FED9272)
(attr smd)
(fp_text reference R3 (at 0 -2.032 90) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 4.7k (at 0 -1.65 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.85 -0.95) (end -1.85 -0.95) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.85 0.95) (end 1.85 -0.95) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.85 0.95) (end 1.85 0.95) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.85 -0.95) (end -1.85 0.95) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer B.SilkS) (width 0.12))
(fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer B.SilkS) (width 0.12))
(fp_line (start 1 -0.625) (end -1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start 1 0.625) (end 1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 0.625) (end 1 0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end -1 0.625) (layer B.Fab) (width 0.1))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)) (justify mirror))
)
(pad 2 smd roundrect (at 1 0 270) (size 1.2 1.4) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2083325)
(net 56 /I2C_SCL))
(pad 1 smd roundrect (at -1 0 270) (size 1.2 1.4) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2083325)
(net 5 +3V3))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FBD2C82)
(at 172.212 86.614)
(descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
(tags "resistor handsolder")
(path /5FCB3DE3)
(attr smd)
(fp_text reference R2 (at 3.048 0) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 39R (at 0 1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325)
(net 90 "Net-(R2-Pad2)"))
(pad 1 smd roundrect (at -1 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325)
(net 8 /~RESET))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FBD2C71)
(at 172.196 88.9 180)
(descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
(tags "resistor handsolder")
(path /5FCB2618)
(attr smd)
(fp_text reference R1 (at -3.064 0) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100k (at 0 1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1 0 180) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325)
(net 8 /~RESET))
(pad 1 smd roundrect (at -1 0 180) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325)
(net 5 +3V3))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module plib:IND_LQH3NPZ100MMEL (layer F.Cu) (tedit 5FBC5A67) (tstamp 5FBD2C60)
(at 132.588 87.376 45)
(path /5FCD2890)
(fp_text reference L1 (at 0.395 -2.635 225) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.015)))
)
(fp_text value LQH3NPN100MJ0 (at 8.636 5.08 225) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.015)))
)
(fp_line (start -1.75 1.75) (end -1.75 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.75 1.75) (end -1.75 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.75 -1.75) (end 1.75 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 -1.75) (end 1.75 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.5 1.67) (end 1.5 1.67) (layer F.SilkS) (width 0.127))
(fp_line (start -1.5 -1.67) (end 1.5 -1.67) (layer F.SilkS) (width 0.127))
(fp_line (start -1.5 1.5) (end -1.5 -1.5) (layer F.Fab) (width 0.127))
(fp_line (start 1.5 1.5) (end -1.5 1.5) (layer F.Fab) (width 0.127))
(fp_line (start 1.5 -1.5) (end 1.5 1.5) (layer F.Fab) (width 0.127))
(fp_line (start -1.5 -1.5) (end 1.5 -1.5) (layer F.Fab) (width 0.127))
(pad 2 smd rect (at 1.1 0 45) (size 0.8 2.7) (layers F.Cu F.Paste F.Mask)
(net 4 /VCC_MCU_VDDCORE))
(pad 1 smd rect (at -1.1 0 45) (size 0.8 2.7) (layers F.Cu F.Paste F.Mask)
(net 89 /VCC_MCU_VSW))
(model ${PENG3D}/LQH3NPZ100MMEL.step
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz -90 0 0))
)
)
(module Connector_IDC:IDC-Header_2x20_P2.54mm_Vertical (layer F.Cu) (tedit 5EAC9A07) (tstamp 5FBD2BCF)
(at 119.38 118.364 90)
(descr "Through hole IDC box header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0")
(tags "Through hole vertical IDC box header THT 2x20 2.54mm double row")
(path /5FDDD66F)
(fp_text reference J4 (at 1.27 -6.1 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value TFT_INTF_Connector (at 1.27 54.36 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 6.22 -5.6) (end -3.68 -5.6) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.22 53.86) (end 6.22 -5.6) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.68 53.86) (end 6.22 53.86) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.68 -5.6) (end -3.68 53.86) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.68 0.5) (end -3.68 0) (layer F.SilkS) (width 0.12))
(fp_line (start -4.68 -0.5) (end -4.68 0.5) (layer F.SilkS) (width 0.12))
(fp_line (start -3.68 0) (end -4.68 -0.5) (layer F.SilkS) (width 0.12))
(fp_line (start -1.98 26.18) (end -3.29 26.18) (layer F.SilkS) (width 0.12))
(fp_line (start -1.98 26.18) (end -1.98 26.18) (layer F.SilkS) (width 0.12))
(fp_line (start -1.98 52.17) (end -1.98 26.18) (layer F.SilkS) (width 0.12))
(fp_line (start 4.52 52.17) (end -1.98 52.17) (layer F.SilkS) (width 0.12))
(fp_line (start 4.52 -3.91) (end 4.52 52.17) (layer F.SilkS) (width 0.12))
(fp_line (start -1.98 -3.91) (end 4.52 -3.91) (layer F.SilkS) (width 0.12))
(fp_line (start -1.98 22.08) (end -1.98 -3.91) (layer F.SilkS) (width 0.12))
(fp_line (start -3.29 22.08) (end -1.98 22.08) (layer F.SilkS) (width 0.12))
(fp_line (start -3.29 53.47) (end -3.29 -5.21) (layer F.SilkS) (width 0.12))
(fp_line (start 5.83 53.47) (end -3.29 53.47) (layer F.SilkS) (width 0.12))
(fp_line (start 5.83 -5.21) (end 5.83 53.47) (layer F.SilkS) (width 0.12))
(fp_line (start -3.29 -5.21) (end 5.83 -5.21) (layer F.SilkS) (width 0.12))
(fp_line (start -1.98 26.18) (end -3.18 26.18) (layer F.Fab) (width 0.1))
(fp_line (start -1.98 26.18) (end -1.98 26.18) (layer F.Fab) (width 0.1))
(fp_line (start -1.98 52.17) (end -1.98 26.18) (layer F.Fab) (width 0.1))
(fp_line (start 4.52 52.17) (end -1.98 52.17) (layer F.Fab) (width 0.1))
(fp_line (start 4.52 -3.91) (end 4.52 52.17) (layer F.Fab) (width 0.1))
(fp_line (start -1.98 -3.91) (end 4.52 -3.91) (layer F.Fab) (width 0.1))
(fp_line (start -1.98 22.08) (end -1.98 -3.91) (layer F.Fab) (width 0.1))
(fp_line (start -3.18 22.08) (end -1.98 22.08) (layer F.Fab) (width 0.1))
(fp_line (start -3.18 53.36) (end -3.18 -4.1) (layer F.Fab) (width 0.1))
(fp_line (start 5.72 53.36) (end -3.18 53.36) (layer F.Fab) (width 0.1))
(fp_line (start 5.72 -5.1) (end 5.72 53.36) (layer F.Fab) (width 0.1))
(fp_line (start -2.18 -5.1) (end 5.72 -5.1) (layer F.Fab) (width 0.1))
(fp_line (start -3.18 -4.1) (end -2.18 -5.1) (layer F.Fab) (width 0.1))
(fp_text user %R (at 1.27 24.13) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 40 thru_hole circle (at 2.54 48.26 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 38 thru_hole circle (at 2.54 45.72 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 20 /~TFT_cRST))
(pad 36 thru_hole circle (at 2.54 43.18 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 21 /TFT_D23))
(pad 34 thru_hole circle (at 2.54 40.64 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 22 /TFT_D21))
(pad 32 thru_hole circle (at 2.54 38.1 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 23 /TFT_D19))
(pad 30 thru_hole circle (at 2.54 35.56 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 24 /TFT_D17))
(pad 28 thru_hole circle (at 2.54 33.02 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 25 /TFT_D15))
(pad 26 thru_hole circle (at 2.54 30.48 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 26 /TFT_D13))
(pad 24 thru_hole circle (at 2.54 27.94 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 27 /TFT_D11))
(pad 22 thru_hole circle (at 2.54 25.4 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 28 /TFT_D9))
(pad 20 thru_hole circle (at 2.54 22.86 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 29 /TFT_D7))
(pad 18 thru_hole circle (at 2.54 20.32 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 30 /TFT_D5))
(pad 16 thru_hole circle (at 2.54 17.78 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 31 /TFT_D3))
(pad 14 thru_hole circle (at 2.54 15.24 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 32 /TFT_D1))
(pad 12 thru_hole circle (at 2.54 12.7 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 33 /TFT_TE))
(pad 10 thru_hole circle (at 2.54 10.16 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 34 /TFT_WR))
(pad 8 thru_hole circle (at 2.54 7.62 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 35 /TFT_DC))
(pad 6 thru_hole circle (at 2.54 5.08 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 36 /TFT_GPIO))
(pad 4 thru_hole circle (at 2.54 2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 37 /I2C_SDA))
(pad 2 thru_hole circle (at 2.54 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 1 GND))
(pad 39 thru_hole circle (at 0 48.26 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 38 /TFT_WAKE))
(pad 37 thru_hole circle (at 0 45.72 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 39 /TFT_STANDBY))
(pad 35 thru_hole circle (at 0 43.18 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 40 /TFT_D22))
(pad 33 thru_hole circle (at 0 40.64 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 41 /TFT_D20))
(pad 31 thru_hole circle (at 0 38.1 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 42 /TFT_D18))
(pad 29 thru_hole circle (at 0 35.56 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 43 /TFT_D16))
(pad 27 thru_hole circle (at 0 33.02 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 44 /TFT_D14))
(pad 25 thru_hole circle (at 0 30.48 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 45 /TFT_D12))
(pad 23 thru_hole circle (at 0 27.94 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 46 /TFT_D10))
(pad 21 thru_hole circle (at 0 25.4 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 47 /TFT_D8))
(pad 19 thru_hole circle (at 0 22.86 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 48 /TFT_D6))
(pad 17 thru_hole circle (at 0 20.32 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 49 /TFT_D4))
(pad 15 thru_hole circle (at 0 17.78 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 50 /TFT_D2))
(pad 13 thru_hole circle (at 0 15.24 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 51 /TFT_D0))
(pad 11 thru_hole circle (at 0 12.7 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 52 /TFT_RD))
(pad 9 thru_hole circle (at 0 10.16 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 53 /~TFT_CS))
(pad 7 thru_hole circle (at 0 7.62 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 54 /~TFT_RST))
(pad 5 thru_hole circle (at 0 5.08 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 55 /TOUCH_INT))
(pad 3 thru_hole circle (at 0 2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 56 /I2C_SCL))
(pad 1 thru_hole roundrect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.1470588235294118)
(net 5 +3V3))
(model ${KISYS3DMOD}/Connector_IDC.3dshapes/IDC-Header_2x20_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_USB:USB_Mini-B_Wuerth_65100516121_Horizontal (layer F.Cu) (tedit 5FD2A02D) (tstamp 5FBD2B1D)
(at 100.838 96.266 270)
(descr "Mini USB 2.0 Type B SMT Horizontal 5 Contacts (https://katalog.we-online.de/em/datasheet/65100516121.pdf)")
(tags "Mini USB 2.0 Type B")
(path /5FC6DC43)
(attr smd)
(fp_text reference J1 (at 0 -5.25 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value USB_B_Mini (at 0 7.35 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -5.89 4.65) (end -5.9 1.15) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.35 -0.85) (end -5.9 -0.85) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.9 1.15) (end -4.35 1.15) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.35 4.65) (end -5.89 4.65) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.9 1.15) (end 5.9 4.65) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.9 -0.85) (end 4.35 -0.85) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.35 1.15) (end 5.9 1.15) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.9 4.65) (end 4.35 4.65) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.35 -0.85) (end 4.35 1.15) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.35 1.15) (end -4.35 -0.85) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.35 4.65) (end 4.35 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.35 6.4) (end -4.35 4.65) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.3 -3.35) (end 3.85 -3.35) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -2.85) (end -1.3 -3.35) (layer F.Fab) (width 0.1))
(fp_line (start -1.9 -3.35) (end -1.6 -2.85) (layer F.Fab) (width 0.1))
(fp_line (start 4.35 6.4) (end -4.35 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.9 -4.35) (end 5.9 -0.85) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.9 -4.35) (end 5.9 -4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.9 -0.85) (end -5.9 -4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.96 6.01) (end 3.96 4.35) (layer F.SilkS) (width 0.12))
(fp_line (start -3.96 6.01) (end 3.96 6.01) (layer F.SilkS) (width 0.12))
(fp_line (start -3.96 4.35) (end -3.96 6.01) (layer F.SilkS) (width 0.12))
(fp_line (start 2.05 -3.46) (end 3.2 -3.46) (layer F.SilkS) (width 0.12))
(fp_line (start -2.05 -4.05) (end -1.35 -4.05) (layer F.SilkS) (width 0.12))
(fp_line (start -2.05 -3.46) (end -2.05 -4.05) (layer F.SilkS) (width 0.12))
(fp_line (start -3.2 -3.46) (end -2.05 -3.46) (layer F.SilkS) (width 0.12))
(fp_line (start 3.96 -1.15) (end 3.96 1.45) (layer F.SilkS) (width 0.12))
(fp_line (start -3.96 1.45) (end -3.96 -1.15) (layer F.SilkS) (width 0.12))
(fp_line (start -3.85 5.9) (end -3.85 -3.35) (layer F.Fab) (width 0.1))
(fp_line (start 3.85 5.9) (end -3.85 5.9) (layer F.Fab) (width 0.1))
(fp_line (start 3.85 -3.35) (end 3.85 5.9) (layer F.Fab) (width 0.1))
(fp_line (start -3.85 -3.35) (end -1.9 -3.35) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad "" np_thru_hole circle (at 2.2 0 270) (size 0.9 0.9) (drill 0.9) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at -2.2 0 270) (size 0.9 0.9) (drill 0.9) (layers *.Cu *.Mask))
(pad 5 smd rect (at 1.6 -2.6 270) (size 0.5 2.5) (layers F.Cu F.Paste F.Mask)
(net 1 GND))
(pad 4 smd rect (at 0.8 -2.6 270) (size 0.5 2.5) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 0 -2.6 270) (size 0.5 2.5) (layers F.Cu F.Paste F.Mask)
(net 13 /USB_DP))
(pad 2 smd rect (at -0.8 -2.6 270) (size 0.5 2.5) (layers F.Cu F.Paste F.Mask)
(net 12 /USB_DM))
(pad 1 smd rect (at -1.6 -2.6 270) (size 0.5 2.5) (layers F.Cu F.Paste F.Mask)
(net 3 /VBUS_USB_RAW))
(pad 6 smd rect (at 4.4 -2.6 270) (size 2 2.5) (layers F.Cu F.Paste F.Mask)
(net 14 "Net-(J1-Pad6)"))
(pad 6 smd rect (at -4.4 -2.6 270) (size 2 2.5) (layers F.Cu F.Paste F.Mask)
(net 14 "Net-(J1-Pad6)"))
(pad 6 smd rect (at 4.4 2.9 270) (size 2 2.5) (layers F.Cu F.Paste F.Mask)
(net 14 "Net-(J1-Pad6)"))
(pad 6 smd rect (at -4.4 2.9 270) (size 2 2.5) (layers F.Cu F.Paste F.Mask)
(net 14 "Net-(J1-Pad6)"))
(model ${PENG3D}/65100516121.igs
(offset (xyz 0 -1.25 2))
(scale (xyz 1 1 1))
(rotate (xyz 0 180 0))
)
)
(module Fuse:Fuse_1812_4532Metric (layer F.Cu) (tedit 5F68FEF1) (tstamp 5FBD2AED)
(at 121.666 91.948 180)
(descr "Fuse SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator")
(tags fuse)
(path /5F8FCEB5)
(attr smd)
(fp_text reference FB3 (at 0 -2.65) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value MF-MSMF050-2 (at 0 2.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 2.95 1.95) (end -2.95 1.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.95 -1.95) (end 2.95 1.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.95 -1.95) (end 2.95 -1.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.95 1.95) (end -2.95 -1.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.386252 1.71) (end 1.386252 1.71) (layer F.SilkS) (width 0.12))
(fp_line (start -1.386252 -1.71) (end 1.386252 -1.71) (layer F.SilkS) (width 0.12))
(fp_line (start 2.25 1.6) (end -2.25 1.6) (layer F.Fab) (width 0.1))
(fp_line (start 2.25 -1.6) (end 2.25 1.6) (layer F.Fab) (width 0.1))
(fp_line (start -2.25 -1.6) (end 2.25 -1.6) (layer F.Fab) (width 0.1))
(fp_line (start -2.25 1.6) (end -2.25 -1.6) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 2 smd roundrect (at 2.1375 0 180) (size 1.125 3.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2222195555555556)
(net 7 "Net-(C6-Pad1)"))
(pad 1 smd roundrect (at -2.1375 0 180) (size 1.125 3.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2222195555555556)
(net 2 +5V))
(model ${PENG3D}/mf-msmf050.stp
(offset (xyz 0 0 0.5))
(scale (xyz 1 1 1))
(rotate (xyz 90 0 90))
)
)
(module digikey-footprints:0603 (layer F.Cu) (tedit 5D288D2B) (tstamp 5FBD2ADC)
(at 113.538 92.456)
(path /5F8EDEE3)
(attr smd)
(fp_text reference FB2 (at -2.638 -0.026) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value BLM18PG471SN1D (at 0 1.9) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.12))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.12))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer F.Fab) (width 0.12))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer F.Fab) (width 0.12))
(fp_line (start -0.3 -0.3) (end 0.3 -0.3) (layer F.SilkS) (width 0.12))
(fp_line (start -0.3 0.3) (end 0.3 0.3) (layer F.SilkS) (width 0.12))
(fp_line (start -1.25 0.71) (end -1.25 -0.71) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.11 0.71) (end -1.11 0.71) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.25 -0.71) (end 1.25 0.71) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.11 -0.71) (end 1.11 -0.71) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.11 0.71) (end -1.25 0.71) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.11 -0.71) (end -1.25 -0.71) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.11 -0.71) (end 1.25 -0.71) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.11 0.71) (end 1.25 0.71) (layer F.CrtYd) (width 0.05))
(pad 1 smd rect (at -0.7 0) (size 0.6 0.8) (layers F.Cu F.Paste F.Mask)
(net 3 /VBUS_USB_RAW))
(pad 2 smd rect (at 0.7 0) (size 0.6 0.8) (layers F.Cu F.Paste F.Mask)
(net 7 "Net-(C6-Pad1)"))
)
(module digikey-footprints:0603 (layer B.Cu) (tedit 5D288D2B) (tstamp 5FBD2AC8)
(at 128.524 105.664 90)
(path /5FCF85F0)
(attr smd)
(fp_text reference FB1 (at 0 2.2 -90) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value BLM18PG471SN1D (at 0 -1.9 -90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer B.Fab) (width 0.12))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer B.Fab) (width 0.12))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.12))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.12))
(fp_line (start -0.3 0.3) (end 0.3 0.3) (layer B.SilkS) (width 0.12))
(fp_line (start -0.3 -0.3) (end 0.3 -0.3) (layer B.SilkS) (width 0.12))
(fp_line (start -1.25 -0.71) (end -1.25 0.71) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.11 -0.71) (end -1.11 -0.71) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.25 0.71) (end 1.25 -0.71) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.11 0.71) (end 1.11 0.71) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.11 -0.71) (end -1.25 -0.71) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.11 0.71) (end -1.25 0.71) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.11 0.71) (end 1.25 0.71) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.11 -0.71) (end 1.25 -0.71) (layer B.CrtYd) (width 0.05))
(pad 1 smd rect (at -0.7 0 90) (size 0.6 0.8) (layers B.Cu B.Paste B.Mask)
(net 5 +3V3))
(pad 2 smd rect (at 0.7 0 90) (size 0.6 0.8) (layers B.Cu B.Paste B.Mask)
(net 6 /VCC_MCU_VDDANA))
)
(module Package_TO_SOT_SMD:SOT-143 (layer F.Cu) (tedit 5A02FF57) (tstamp 5FBD2AB4)
(at 121.666 98.552)
(descr SOT-143)
(tags SOT-143)
(path /5FC6B252)
(attr smd)
(fp_text reference D2 (at 0 2.794) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value PRTR5V0U2X (at -0.28 2.48) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.05 1.75) (end -2.05 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.05 1.75) (end 2.05 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.05 -1.75) (end -2.05 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.05 -1.75) (end 2.05 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.2 -1.5) (end 1.2 1.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.2 1.5) (end -1.2 1.5) (layer F.Fab) (width 0.1))
(fp_line (start -1.2 1.5) (end -1.2 -1) (layer F.Fab) (width 0.1))
(fp_line (start -0.7 -1.5) (end 1.2 -1.5) (layer F.Fab) (width 0.1))
(fp_line (start -1.2 -1) (end -0.7 -1.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.2 -1.55) (end -1.75 -1.55) (layer F.SilkS) (width 0.12))
(fp_line (start -1.2 1.55) (end 1.2 1.55) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)))
)
(pad 4 smd rect (at 1.1 -0.95 270) (size 1 1.4) (layers F.Cu F.Paste F.Mask)
(net 2 +5V))
(pad 3 smd rect (at 1.1 0.95 270) (size 1 1.4) (layers F.Cu F.Paste F.Mask)
(net 12 /USB_DM))
(pad 2 smd rect (at -1.1 0.95 270) (size 1 1.4) (layers F.Cu F.Paste F.Mask)
(net 13 /USB_DP))
(pad 1 smd rect (at -1.1 -0.77 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask)
(net 1 GND))
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-143.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEF1) (tstamp 5FBD2AA0)
(at 97.028 87.122 270)
(descr "LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "LED handsolder")
(path /5F9ABBEC)
(attr smd)
(fp_text reference D1 (at -3.048 0 180) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LED (at 0 1.65 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.86 0.96) (end 1 0.96) (layer F.SilkS) (width 0.12))
(fp_line (start -1.86 -0.96) (end -1.86 0.96) (layer F.SilkS) (width 0.12))
(fp_line (start 1 -0.96) (end -1.86 -0.96) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.3) (end -1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start -0.7 -0.6) (end -1 -0.3) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.6) (end -0.7 -0.6) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.025 0 270) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2173904347826087)
(net 11 "Net-(D1-Pad2)"))
(pad 1 smd roundrect (at -1.025 0 270) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2173904347826087)
(net 1 GND))
(model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD2A8D)
(at 160.274 85.09 90)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FE138AE)
(attr smd)
(fp_text reference C23 (at -0.254 2.032 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 6.8pF (at 0 1.68 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0 90) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0 90) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 10 /XIN32))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD2A5A)
(at 157.734 85.09 90)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FE0D080)
(attr smd)
(fp_text reference C20 (at 0 -1.68 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 6.8pF (at 0 1.68 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0 90) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0 90) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 9 /XOUT32))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer B.Cu) (tedit 5F68FEEF) (tstamp 5FBD2A38)
(at 136.398 106.172)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FD6D553)
(attr smd)
(fp_text reference C18 (at 3.556 0.254) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100nF (at 0 -1.68) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.88 -0.98) (end -1.88 -0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.88 0.98) (end 1.88 -0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end 1.88 0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end -1.88 0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer B.SilkS) (width 0.12))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer B.SilkS) (width 0.12))
(fp_line (start 1 -0.625) (end -1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start 1 0.625) (end 1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 0.625) (end 1 0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end -1 0.625) (layer B.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)) (justify mirror))
)
(pad 2 smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2127659574468085)
(net 5 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer B.Cu) (tedit 5F68FEEF) (tstamp 5FBD2A27)
(at 136.398 108.458)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FD6D11D)
(attr smd)
(fp_text reference C17 (at 3.556 0) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100nF (at 0 -1.68) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.88 -0.98) (end -1.88 -0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.88 0.98) (end 1.88 -0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end 1.88 0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end -1.88 0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer B.SilkS) (width 0.12))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer B.SilkS) (width 0.12))
(fp_line (start 1 -0.625) (end -1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start 1 0.625) (end 1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 0.625) (end 1 0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end -1 0.625) (layer B.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)) (justify mirror))
)
(pad 2 smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2127659574468085)
(net 5 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD2A16)
(at 140.716 77.724 180)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FD6CC65)
(attr smd)
(fp_text reference C16 (at 3.81 0) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100nF (at 0 1.68) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 5 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer B.Cu) (tedit 5F68FEEF) (tstamp 5FBD2A05)
(at 143.764 108.458)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FD68024)
(attr smd)
(fp_text reference C15 (at 3.556 0) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100nF (at 0 0) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.88 -0.98) (end -1.88 -0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.88 0.98) (end 1.88 -0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end 1.88 0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end -1.88 0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer B.SilkS) (width 0.12))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer B.SilkS) (width 0.12))
(fp_line (start 1 -0.625) (end -1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start 1 0.625) (end 1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 0.625) (end 1 0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end -1 0.625) (layer B.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)) (justify mirror))
)
(pad 2 smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2127659574468085)
(net 5 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD29F4)
(at 144.78 75.438)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FD679AC)
(attr smd)
(fp_text reference C14 (at 3.69 -0.048) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100nF (at 0 1.68) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 5 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD29E3)
(at 125.984 84.29)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FD6752B)
(attr smd)
(fp_text reference C13 (at 0 -1.68) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100nF (at 0 1.68) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 5 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD29D2)
(at 125.984 87.3)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FD5F17A)
(attr smd)
(fp_text reference C12 (at -0.094 1.87) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100nF (at 0 1.68) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 5 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer B.Cu) (tedit 5F68FEEF) (tstamp 5FBD29C1)
(at 130.556 107.442 270)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FD109C9)
(attr smd)
(fp_text reference C11 (at 0 1.68 270) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100nF (at 0 -1.68 270) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.88 -0.98) (end -1.88 -0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.88 0.98) (end 1.88 -0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end 1.88 0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end -1.88 0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer B.SilkS) (width 0.12))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer B.SilkS) (width 0.12))
(fp_line (start 1 -0.625) (end -1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start 1 0.625) (end 1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 0.625) (end 1 0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end -1 0.625) (layer B.Fab) (width 0.1))
(fp_text user %R (at 0 0 270) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)) (justify mirror))
)
(pad 2 smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2127659574468085)
(net 6 /VCC_MCU_VDDANA))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD29B0)
(at 144.78 77.724)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FD5ABDA)
(attr smd)
(fp_text reference C10 (at 3.57 -0.124) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10uF/10V (at 0 1.68) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 5 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD299F)
(at 125.984 73.152)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FCBE86F)
(attr smd)
(fp_text reference C9 (at 0 -1.68) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 4.7nF (at 0 1.68) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 8 /~RESET))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD298E)
(at 115.57 89.662 180)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5F8A4FCD)
(attr smd)
(fp_text reference C8 (at 2.91 -0.028) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 22uF (at 0 1.68) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 5 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD297D)
(at 144.78 80.01)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FCDBE22)
(attr smd)
(fp_text reference C7 (at 3.23 -0.1) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 4.7uF (at 0 1.68) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 4 /VCC_MCU_VDDCORE))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD296C)
(at 116.078 95.504 270)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5F8E6C94)
(attr smd)
(fp_text reference C6 (at 0 -1.68 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 4.7nF (at 0 1.68 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 7 "Net-(C6-Pad1)"))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer B.Cu) (tedit 5F68FEEF) (tstamp 5FBD295B)
(at 130.556 103.378 90)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FD02D24)
(attr smd)
(fp_text reference C5 (at 0 1.68 90) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10uF/10V (at 0 -1.68 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.88 -0.98) (end -1.88 -0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.88 0.98) (end 1.88 -0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end 1.88 0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end -1.88 0.98) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer B.SilkS) (width 0.12))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer B.SilkS) (width 0.12))
(fp_line (start 1 -0.625) (end -1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start 1 0.625) (end 1 -0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 0.625) (end 1 0.625) (layer B.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end -1 0.625) (layer B.Fab) (width 0.1))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)) (justify mirror))
)
(pad 2 smd roundrect (at 1.0375 0 90) (size 1.175 1.45) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0 90) (size 1.175 1.45) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2127659574468085)
(net 6 /VCC_MCU_VDDANA))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD2939)
(at 140.716 80.01 180)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5FCDBA65)
(attr smd)
(fp_text reference C3 (at 3.302 0) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100nF (at 0 1.68) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 4 /VCC_MCU_VDDCORE))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD2928)
(at 110.744 95.504 270)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5F8E6796)
(attr smd)
(fp_text reference C2 (at 0 -1.68 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 4.7nF (at 0 1.68 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 3 /VBUS_USB_RAW))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FBD2917)
(at 120.65 87.122)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "capacitor handsolder")
(path /5F8A1559)
(attr smd)
(fp_text reference C1 (at 0 -1.68) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100nF (at 0 1.68) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 2 smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 1 GND))
(pad 1 smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2127659574468085)
(net 2 +5V))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(gr_line (start 108.378 70.358) (end 192.786 70.358) (layer Edge.Cuts) (width 0.05) (tstamp 5FC4DEA0))
(gr_line (start 96.012 70.358) (end 98.378 70.358) (layer Edge.Cuts) (width 0.05))
(dimension 54.61 (width 0.15) (layer Eco1.User)
(gr_text "54.610 mm" (at 88.7 97.663 270) (layer Eco1.User)
(effects (font (size 1 1) (thickness 0.15)))
)
(feature1 (pts (xy 96.012 124.968) (xy 89.413579 124.968)))
(feature2 (pts (xy 96.012 70.358) (xy 89.413579 70.358)))
(crossbar (pts (xy 90 70.358) (xy 90 124.968)))
(arrow1a (pts (xy 90 124.968) (xy 89.413579 123.841496)))
(arrow1b (pts (xy 90 124.968) (xy 90.586421 123.841496)))
(arrow2a (pts (xy 90 70.358) (xy 89.413579 71.484504)))
(arrow2b (pts (xy 90 70.358) (xy 90.586421 71.484504)))
)
(dimension 99.822323 (width 0.15) (layer Eco1.User) (tstamp 5FBEE2EF)
(gr_text "99.822 mm" (at 144.394343 127.672979 359.8542095) (layer Eco1.User) (tstamp 5FBEE2EF)
(effects (font (size 1 1) (thickness 0.15)))
)
(feature1 (pts (xy 194.322 121.254) (xy 194.307159 127.086402)))
(feature2 (pts (xy 94.5 121) (xy 94.485159 126.832402)))
(crossbar (pts (xy 94.486651 126.245983) (xy 194.308651 126.499983)))
(arrow1a (pts (xy 194.308651 126.499983) (xy 193.180659 127.083535)))
(arrow1b (pts (xy 194.308651 126.499983) (xy 193.183643 125.910698)))
(arrow2a (pts (xy 94.486651 126.245983) (xy 95.611659 126.835268)))
(arrow2b (pts (xy 94.486651 126.245983) (xy 95.614643 125.662431)))
)
(gr_text PA20 (at 191.914 111.58) (layer F.SilkS) (tstamp 5FBF2D2D)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PA19 (at 181.5 109.04) (layer F.SilkS) (tstamp 5FBF2D2C)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PA18 (at 191.914 109.04) (layer F.SilkS) (tstamp 5FBF2D2B)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PA16 (at 191.914 106.5) (layer F.SilkS) (tstamp 5FBF2D2A)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC03 (at 181.5 116.66) (layer F.SilkS) (tstamp 5FBF2D29)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC01 (at 181.5 114.12) (layer F.SilkS) (tstamp 5FBF2D28)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PA17 (at 181.5 106.5) (layer F.SilkS) (tstamp 5FBF2D27)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC02 (at 191.914 116.66) (layer F.SilkS) (tstamp 5FBF2D26)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PA21 (at 181.5 111.58) (layer F.SilkS) (tstamp 5FBF2D25)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC00 (at 191.914 114.12) (layer F.SilkS) (tstamp 5FBF2D24)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC27 (at 191.914 96.08) (layer F.SilkS) (tstamp 5FBF2559)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC15 (at 191.914 101.16) (layer F.SilkS) (tstamp 5FBF2558)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC14 (at 181.5 98.62) (layer F.SilkS) (tstamp 5FBF2557)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC28 (at 181.5 96.08) (layer F.SilkS) (tstamp 5FBF2556)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC07 (at 191.914 93.54) (layer F.SilkS) (tstamp 5FBF2555)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC13 (at 191.914 98.62) (layer F.SilkS) (tstamp 5FBF2554)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC06 (at 181.5 91) (layer F.SilkS) (tstamp 5FBF2553)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC10 (at 181.5 93.54) (layer F.SilkS) (tstamp 5FBF2552)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC20 (at 181.5 101.16) (layer F.SilkS) (tstamp 5FBF2551)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC05 (at 191.914 91) (layer F.SilkS) (tstamp 5FBF2550)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text 3V3 (at 191.914 86.16) (layer F.SilkS) (tstamp 5FBF1346)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text 5V (at 181.5 86.16) (layer F.SilkS) (tstamp 5FBF1344)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC20 (at 191.914 83.62) (layer F.SilkS) (tstamp 5FBF1342)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text GND (at 181.5 83.62) (layer F.SilkS) (tstamp 5FBF1340)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC27 (at 191.914 81.08) (layer F.SilkS) (tstamp 5FBF133E)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC28 (at 181.5 81.08) (layer F.SilkS) (tstamp 5FBF133C)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC25 (at 191.914 78.54) (layer F.SilkS) (tstamp 5FBF133A)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC26 (at 181.5 78.54) (layer F.SilkS) (tstamp 5FBF1338)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC21 (at 191.914 76) (layer F.SilkS) (tstamp 5FBF1336)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_text PC24 (at 181.5 76) (layer F.SilkS)
(effects (font (size 0.508 0.508) (thickness 0.127)))
)
(gr_line (start 194.31 71.882) (end 194.31 123.698) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 192.786 71.882) (end 194.31 71.882) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 96.012 71.882) (end 96.012 70.358) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 96.012 123.444) (end 94.488 123.444) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 193.04 123.698) (end 193.04 124.968) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_line (start 94.488 123.444) (end 94.488 71.882) (layer Edge.Cuts) (width 0.05) (tstamp 5FBD3450))
(gr_line (start 193.04 124.968) (end 96.012 124.968) (layer Edge.Cuts) (width 0.05) (tstamp 5FBD3453))
(segment (start 157.734 84.0525) (end 159.0825 84.0525) (width 0.5) (layer F.Cu) (net 1))
(segment (start 159.0825 84.0525) (end 160.274 84.0525) (width 0.5) (layer F.Cu) (net 1))
(via (at 192.72 92.17) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 192.39 91.84) (end 192.72 92.17) (width 0.5) (layer B.Cu) (net 1))
(segment (start 190.832 91.84) (end 192.39 91.84) (width 0.5) (layer B.Cu) (net 1))
(via (at 192.55 94.65) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 192.26 94.94) (end 192.55 94.65) (width 0.5) (layer B.Cu) (net 1))
(segment (start 188.332 94.94) (end 192.26 94.94) (width 0.5) (layer B.Cu) (net 1))
(segment (start 116.078 98.042) (end 116.07 98.05) (width 0.5) (layer F.Cu) (net 1))
(via (at 116.07 98.05) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 116.078 96.5415) (end 116.078 98.042) (width 0.5) (layer F.Cu) (net 1))
(via (at 110.75 98.13) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 110.744 98.124) (end 110.75 98.13) (width 0.5) (layer F.Cu) (net 1))
(segment (start 110.744 96.5415) (end 110.744 98.124) (width 0.5) (layer F.Cu) (net 1))
(segment (start 120.566 96.316) (end 120.52 96.27) (width 0.5) (layer F.Cu) (net 1))
(via (at 120.52 96.27) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 120.566 97.782) (end 120.566 96.316) (width 0.5) (layer F.Cu) (net 1))
(via (at 111.56 90.52) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 112.418 89.662) (end 111.56 90.52) (width 0.5) (layer F.Cu) (net 1))
(segment (start 114.5325 89.662) (end 112.418 89.662) (width 0.5) (layer F.Cu) (net 1))
(via (at 97 82.47) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 97.028 82.498) (end 97 82.47) (width 0.5) (layer F.Cu) (net 1))
(segment (start 97.028 86.097) (end 97.028 82.498) (width 0.5) (layer F.Cu) (net 1))
(via (at 106 98.64) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 105.226 97.866) (end 106 98.64) (width 0.5) (layer F.Cu) (net 1))
(segment (start 103.438 97.866) (end 105.226 97.866) (width 0.5) (layer F.Cu) (net 1))
(via (at 128.9 85.66) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 128.7615 85.5215) (end 128.9 85.66) (width 0.5) (layer F.Cu) (net 1))
(segment (start 127.0215 85.5215) (end 128.7615 85.5215) (width 0.5) (layer F.Cu) (net 1))
(segment (start 127.0215 87.3) (end 127.0215 85.5215) (width 0.5) (layer F.Cu) (net 1))
(segment (start 127.0215 85.5215) (end 127.0215 84.29) (width 0.5) (layer F.Cu) (net 1))
(segment (start 139.6785 80.01) (end 139.6785 78.6785) (width 0.5) (layer F.Cu) (net 1))
(segment (start 139.6785 78.6785) (end 139.6785 77.724) (width 0.5) (layer F.Cu) (net 1))
(segment (start 145.8175 77.724) (end 145.8175 75.438) (width 0.5) (layer F.Cu) (net 1))
(segment (start 145.8175 80.01) (end 145.8175 77.724) (width 0.5) (layer F.Cu) (net 1))
(via (at 147.47 77.68) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 147.426 77.724) (end 147.47 77.68) (width 0.5) (layer F.Cu) (net 1))
(segment (start 145.8175 77.724) (end 147.426 77.724) (width 0.5) (layer F.Cu) (net 1))
(segment (start 137.4355 108.458) (end 137.4355 107.3255) (width 0.5) (layer B.Cu) (net 1))
(segment (start 137.4355 107.3255) (end 137.4355 106.172) (width 0.5) (layer B.Cu) (net 1))
(via (at 121.7 84.18) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 121.6875 87.122) (end 121.6875 84.1925) (width 0.5) (layer F.Cu) (net 1))
(segment (start 121.6875 84.1925) (end 121.7 84.18) (width 0.5) (layer F.Cu) (net 1))
(via (at 110.26 88.86) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 111.004 86.242) (end 111.004 88.116) (width 0.5) (layer F.Cu) (net 1))
(segment (start 111.004 88.116) (end 110.26 88.86) (width 0.5) (layer F.Cu) (net 1))
(via (at 140.89 84.43) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(segment (start 140.048435 85.271565) (end 140.89 84.43) (width 0.25) (layer F.Cu) (net 1))
(segment (start 140.048435 85.843154) (end 140.048435 85.271565) (width 0.25) (layer F.Cu) (net 1))
(via (at 145.89 91.49) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(segment (start 145.95 91.49) (end 145.89 91.49) (width 0.25) (layer F.Cu) (net 1))
(segment (start 146.995759 90.444241) (end 145.95 91.49) (width 0.25) (layer F.Cu) (net 1))
(segment (start 146.995759 90.439348) (end 146.995759 90.444241) (width 0.25) (layer F.Cu) (net 1))
(via (at 142.91 102.08) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(segment (start 144.167332 103.337332) (end 142.91 102.08) (width 0.25) (layer F.Cu) (net 1))
(segment (start 144.167332 103.397079) (end 144.167332 103.337332) (width 0.25) (layer F.Cu) (net 1))
(segment (start 140.85 103.656175) (end 140.85 103.57) (width 0.25) (layer F.Cu) (net 1))
(via (at 140.85 103.57) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(segment (start 139.694882 104.811293) (end 140.85 103.656175) (width 0.25) (layer F.Cu) (net 1))
(via (at 137.83731 78.73806) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 139.6785 78.6785) (end 137.89687 78.6785) (width 0.5) (layer F.Cu) (net 1))
(segment (start 137.89687 78.6785) (end 137.83731 78.73806) (width 0.5) (layer F.Cu) (net 1))
(via (at 130.484185 109.288747) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 130.556 109.216932) (end 130.484185 109.288747) (width 0.5) (layer B.Cu) (net 1))
(segment (start 130.556 108.4795) (end 130.556 109.216932) (width 0.5) (layer B.Cu) (net 1))
(segment (start 135.098688 100.215099) (end 136.493787 98.82) (width 0.25) (layer F.Cu) (net 1))
(via (at 137.26 98.82) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(segment (start 136.493787 98.82) (end 137.26 98.82) (width 0.25) (layer F.Cu) (net 1))
(segment (start 128.9795 102.3405) (end 128.96 102.36) (width 0.25) (layer B.Cu) (net 1))
(via (at 128.96 102.36) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(segment (start 130.556 102.3405) (end 128.9795 102.3405) (width 0.25) (layer B.Cu) (net 1))
(segment (start 138.9545 107.3255) (end 139.073428 107.206572) (width 0.5) (layer B.Cu) (net 1))
(via (at 139.073428 107.206572) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 137.4355 107.3255) (end 138.9545 107.3255) (width 0.5) (layer B.Cu) (net 1))
(segment (start 150.884846 96.234104) (end 149.75107 95.100328) (width 0.25) (layer F.Cu) (net 1))
(via (at 149.75107 95.100328) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(segment (start 150.884846 96.679565) (end 150.884846 96.234104) (width 0.25) (layer F.Cu) (net 1))
(via (at 159.05 82.34731) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 159.0825 82.37981) (end 159.05 82.34731) (width 0.5) (layer F.Cu) (net 1))
(segment (start 159.0825 84.0525) (end 159.0825 82.37981) (width 0.5) (layer F.Cu) (net 1))
(segment (start 177.817872 83.566) (end 177.605936 83.354064) (width 0.5) (layer F.Cu) (net 1))
(segment (start 184.17 83.566) (end 177.817872 83.566) (width 0.5) (layer F.Cu) (net 1))
(via (at 177.605936 83.354064) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 146.642206 100.922206) (end 145.918432 100.198432) (width 0.25) (layer F.Cu) (net 1))
(segment (start 145.918432 100.198432) (end 145.487759 100.198432) (width 0.25) (layer F.Cu) (net 1))
(via (at 145.487759 100.198432) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(via (at 158.487136 98.56897) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 159.004 98.052106) (end 158.487136 98.56897) (width 0.5) (layer F.Cu) (net 1))
(segment (start 159.004 95.506) (end 159.004 98.052106) (width 0.5) (layer F.Cu) (net 1))
(via (at 129.41 73.26) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 129.302 73.152) (end 129.41 73.26) (width 0.5) (layer F.Cu) (net 1))
(segment (start 127.0215 73.152) (end 129.302 73.152) (width 0.5) (layer F.Cu) (net 1))
(segment (start 135.098688 90.792901) (end 136.84 92.534213) (width 0.25) (layer F.Cu) (net 1))
(segment (start 136.84 92.534213) (end 136.84 92.83) (width 0.25) (layer F.Cu) (net 1))
(via (at 136.84 92.83) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(via (at 190.97 103.5) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(segment (start 191.732 104.262) (end 190.97 103.5) (width 0.25) (layer B.Cu) (net 1))
(segment (start 191.732 105.04) (end 191.732 104.262) (width 0.25) (layer B.Cu) (net 1))
(via (at 191.82 89.98) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(segment (start 190.832 90.968) (end 191.82 89.98) (width 0.25) (layer B.Cu) (net 1))
(segment (start 190.832 91.84) (end 190.832 90.968) (width 0.25) (layer B.Cu) (net 1))
(via (at 146.93 108.52) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 1))
(segment (start 144.8015 108.458) (end 146.868 108.458) (width 0.5) (layer B.Cu) (net 1))
(segment (start 146.868 108.458) (end 146.93 108.52) (width 0.5) (layer B.Cu) (net 1))
(via (at 99.15 77.12) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(segment (start 100.412 75.858) (end 99.15 77.12) (width 0.25) (layer F.Cu) (net 1))
(segment (start 100.412 72.858) (end 100.412 75.858) (width 0.25) (layer F.Cu) (net 1))
(segment (start 101.378 72.858) (end 100.412 72.858) (width 0.25) (layer F.Cu) (net 1))
(segment (start 100.412 72.858) (end 99.378 72.858) (width 0.25) (layer F.Cu) (net 1))
(segment (start 105.378 75.012) (end 105.378 72.858) (width 0.25) (layer B.Cu) (net 1))
(segment (start 104.17 76.22) (end 105.378 75.012) (width 0.25) (layer B.Cu) (net 1))
(via (at 104.17 76.22) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
(via (at 122.88 96.33) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 2))
(segment (start 122.766 96.444) (end 122.88 96.33) (width 0.5) (layer F.Cu) (net 2))
(segment (start 122.766 97.602) (end 122.766 96.444) (width 0.5) (layer F.Cu) (net 2))
(via (at 125.4 92.14) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 2))
(segment (start 122.88 94.66) (end 125.4 92.14) (width 0.5) (layer In2.Cu) (net 2))
(segment (start 122.88 96.33) (end 122.88 94.66) (width 0.5) (layer In2.Cu) (net 2))
(segment (start 123.9955 92.14) (end 123.8035 91.948) (width 0.5) (layer F.Cu) (net 2))
(segment (start 125.4 92.14) (end 123.9955 92.14) (width 0.5) (layer F.Cu) (net 2))
(via (at 117.67 87) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 2))
(segment (start 122.81 92.14) (end 117.67 87) (width 0.5) (layer In2.Cu) (net 2))
(segment (start 125.4 92.14) (end 122.81 92.14) (width 0.5) (layer In2.Cu) (net 2))
(segment (start 119.4905 87) (end 119.6125 87.122) (width 0.5) (layer F.Cu) (net 2))
(segment (start 117.67 87) (end 119.4905 87) (width 0.5) (layer F.Cu) (net 2))
(segment (start 116.322 87) (end 115.564 86.242) (width 0.5) (layer F.Cu) (net 2))
(segment (start 117.67 87) (end 116.322 87) (width 0.5) (layer F.Cu) (net 2))
(segment (start 180.436 86.106) (end 180.28 85.95) (width 0.5) (layer F.Cu) (net 2))
(via (at 180.28 85.95) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 2))
(segment (start 184.17 86.106) (end 180.436 86.106) (width 0.5) (layer F.Cu) (net 2))
(segment (start 180.28 85.95) (end 184.25 81.98) (width 0.5) (layer B.Cu) (net 2))
(segment (start 184.25 81.98) (end 184.25 72.72) (width 0.5) (layer B.Cu) (net 2))
(segment (start 184.25 72.72) (end 183.44 71.91) (width 0.5) (layer B.Cu) (net 2))
(segment (start 183.44 71.91) (end 134.95 71.91) (width 0.5) (layer B.Cu) (net 2))
(segment (start 134.95 71.91) (end 125.64 81.22) (width 0.5) (layer B.Cu) (net 2))
(segment (start 125.64 81.22) (end 121.35 81.22) (width 0.5) (layer B.Cu) (net 2))
(segment (start 117.67 84.9) (end 117.67 87) (width 0.5) (layer B.Cu) (net 2))
(segment (start 121.35 81.22) (end 117.67 84.9) (width 0.5) (layer B.Cu) (net 2))
(segment (start 110.8275 94.4665) (end 112.838 92.456) (width 0.5) (layer F.Cu) (net 3))
(segment (start 110.744 94.4665) (end 110.8275 94.4665) (width 0.5) (layer F.Cu) (net 3))
(segment (start 110.5445 94.666) (end 110.744 94.4665) (width 0.5) (layer F.Cu) (net 3))
(segment (start 103.438 94.666) (end 110.5445 94.666) (width 0.5) (layer F.Cu) (net 3))
(segment (start 134.49 89.477107) (end 135.452241 90.439348) (width 0.25) (layer F.Cu) (net 4))
(segment (start 134.49 87.722366) (end 134.49 89.477107) (width 0.25) (layer F.Cu) (net 4))
(segment (start 133.365817 86.598183) (end 134.49 87.722366) (width 0.25) (layer F.Cu) (net 4))
(segment (start 141.7535 80.01) (end 143.7425 80.01) (width 0.25) (layer F.Cu) (net 4))
(segment (start 139.1135 82.65) (end 138.03 82.65) (width 0.25) (layer F.Cu) (net 4))
(via (at 138.03 82.65) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 4))
(segment (start 141.7535 80.01) (end 139.1135 82.65) (width 0.25) (layer F.Cu) (net 4))
(via (at 134.08 85.19) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 4))
(segment (start 136.62 82.65) (end 134.08 85.19) (width 0.25) (layer B.Cu) (net 4))
(segment (start 138.03 82.65) (end 136.62 82.65) (width 0.25) (layer B.Cu) (net 4))
(segment (start 134.08 85.884) (end 133.365817 86.598183) (width 0.25) (layer F.Cu) (net 4))
(segment (start 134.08 85.19) (end 134.08 85.884) (width 0.25) (layer F.Cu) (net 4))
(via (at 173.22 90.48) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 173.196 90.456) (end 173.22 90.48) (width 0.5) (layer F.Cu) (net 5))
(segment (start 173.196 88.9) (end 173.196 90.456) (width 0.5) (layer F.Cu) (net 5))
(via (at 193.28 86.01) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 193.184 86.106) (end 193.28 86.01) (width 0.5) (layer F.Cu) (net 5))
(segment (start 189.21 86.106) (end 193.184 86.106) (width 0.5) (layer F.Cu) (net 5))
(via (at 192.4 97.37) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 192.17 97.14) (end 192.4 97.37) (width 0.5) (layer B.Cu) (net 5))
(segment (start 188.332 97.14) (end 192.17 97.14) (width 0.5) (layer B.Cu) (net 5))
(via (at 128.53 107.67) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 128.524 107.664) (end 128.53 107.67) (width 0.5) (layer B.Cu) (net 5))
(segment (start 128.524 106.364) (end 128.524 107.664) (width 0.5) (layer B.Cu) (net 5))
(segment (start 135.3605 108.458) (end 135.3605 107.2705) (width 0.5) (layer B.Cu) (net 5))
(segment (start 135.3605 107.2705) (end 135.3605 106.172) (width 0.5) (layer B.Cu) (net 5))
(via (at 112.97 88.08) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 113.284 87.766) (end 112.97 88.08) (width 0.5) (layer F.Cu) (net 5))
(segment (start 113.284 86.242) (end 113.284 87.766) (width 0.5) (layer F.Cu) (net 5))
(via (at 113.26 75.68) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 113.284 75.704) (end 113.26 75.68) (width 0.5) (layer F.Cu) (net 5))
(segment (start 113.284 79.942) (end 113.284 75.704) (width 0.5) (layer F.Cu) (net 5))
(via (at 117.64 79.96) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 117.622 79.942) (end 117.64 79.96) (width 0.5) (layer F.Cu) (net 5))
(segment (start 113.284 79.942) (end 117.622 79.942) (width 0.5) (layer F.Cu) (net 5))
(via (at 151.37 75.4) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 151.378 75.408) (end 151.37 75.4) (width 0.5) (layer B.Cu) (net 5))
(segment (start 151.378 76.978) (end 151.378 75.408) (width 0.5) (layer B.Cu) (net 5))
(segment (start 150.114 76.978) (end 151.378 76.978) (width 0.5) (layer B.Cu) (net 5))
(segment (start 151.378 76.978) (end 152.654 76.978) (width 0.5) (layer B.Cu) (net 5))
(segment (start 143.7425 77.724) (end 143.7425 75.438) (width 0.5) (layer F.Cu) (net 5))
(segment (start 143.7425 77.724) (end 141.7535 77.724) (width 0.5) (layer F.Cu) (net 5))
(via (at 141.79 75.68) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 141.7535 75.7165) (end 141.79 75.68) (width 0.5) (layer F.Cu) (net 5))
(segment (start 141.7535 77.724) (end 141.7535 75.7165) (width 0.5) (layer F.Cu) (net 5))
(segment (start 142.032 75.438) (end 141.79 75.68) (width 0.5) (layer F.Cu) (net 5))
(segment (start 143.7425 75.438) (end 142.032 75.438) (width 0.5) (layer F.Cu) (net 5))
(segment (start 123.4765 85.9065) (end 123.26 85.69) (width 0.5) (layer F.Cu) (net 5))
(via (at 123.26 85.69) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 124.9465 85.9065) (end 123.4765 85.9065) (width 0.5) (layer F.Cu) (net 5))
(segment (start 124.9465 84.29) (end 124.9465 85.9065) (width 0.5) (layer F.Cu) (net 5))
(segment (start 124.9465 85.9065) (end 124.9465 87.3) (width 0.5) (layer F.Cu) (net 5))
(via (at 108.68 77.08) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 113.284 79.942) (end 109.884 79.942) (width 0.5) (layer F.Cu) (net 5))
(segment (start 109.884 79.942) (end 108.68 78.738) (width 0.5) (layer F.Cu) (net 5))
(segment (start 108.68 78.738) (end 108.68 77.08) (width 0.5) (layer F.Cu) (net 5))
(via (at 139.64 83.61) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 5))
(segment (start 139.149134 84.100866) (end 139.64 83.61) (width 0.25) (layer F.Cu) (net 5))
(segment (start 139.149134 85.650959) (end 139.149134 84.100866) (width 0.25) (layer F.Cu) (net 5))
(segment (start 139.694882 86.196707) (end 139.149134 85.650959) (width 0.25) (layer F.Cu) (net 5))
(via (at 141.17 106.65) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 5))
(segment (start 140.048435 105.528435) (end 141.17 106.65) (width 0.25) (layer F.Cu) (net 5))
(segment (start 140.048435 105.164846) (end 140.048435 105.528435) (width 0.25) (layer F.Cu) (net 5))
(segment (start 142.7265 108.2065) (end 141.17 106.65) (width 0.5) (layer B.Cu) (net 5))
(segment (start 142.7265 108.458) (end 142.7265 108.2065) (width 0.5) (layer B.Cu) (net 5))
(segment (start 140.103456 105.583456) (end 140.103456 105.219867) (width 0.5) (layer F.Cu) (net 5))
(segment (start 141.17 106.65) (end 140.103456 105.583456) (width 0.5) (layer F.Cu) (net 5))
(segment (start 133.92077 107.2705) (end 133.882175 107.309095) (width 0.5) (layer B.Cu) (net 5))
(via (at 133.882175 107.309095) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 135.3605 107.2705) (end 133.92077 107.2705) (width 0.5) (layer B.Cu) (net 5))
(via (at 148.592259 102.728036) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 5))
(segment (start 146.995759 100.568652) (end 148.19226 101.765153) (width 0.25) (layer F.Cu) (net 5))
(segment (start 148.19226 101.765153) (end 148.19226 102.328037) (width 0.25) (layer F.Cu) (net 5))
(segment (start 148.19226 102.328037) (end 148.592259 102.728036) (width 0.25) (layer F.Cu) (net 5))
(segment (start 148.12519 88.60281) (end 148.144315 88.60281) (width 0.25) (layer F.Cu) (net 5))
(via (at 148.71 88.60281) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 5))
(segment (start 146.642206 90.085794) (end 148.12519 88.60281) (width 0.25) (layer F.Cu) (net 5))
(segment (start 148.144315 88.60281) (end 148.71 88.60281) (width 0.25) (layer F.Cu) (net 5))
(segment (start 150.884846 94.328435) (end 152.028435 94.328435) (width 0.25) (layer F.Cu) (net 5))
(via (at 152.54 94.84) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 5))
(segment (start 152.028435 94.328435) (end 152.54 94.84) (width 0.25) (layer F.Cu) (net 5))
(via (at 135.63 93.07) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 5))
(segment (start 135.63 92.738427) (end 135.63 93.07) (width 0.25) (layer F.Cu) (net 5))
(segment (start 134.391581 91.500008) (end 135.63 92.738427) (width 0.25) (layer F.Cu) (net 5))
(via (at 116.63 91.77) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 116.6075 91.7475) (end 116.63 91.77) (width 0.5) (layer F.Cu) (net 5))
(segment (start 116.6075 89.662) (end 116.6075 91.7475) (width 0.5) (layer F.Cu) (net 5))
(via (at 145.89 105.63) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 5))
(segment (start 145.693146 105.63) (end 145.89 105.63) (width 0.25) (layer F.Cu) (net 5))
(segment (start 143.813779 103.750633) (end 145.693146 105.63) (width 0.25) (layer F.Cu) (net 5))
(segment (start 99.568 82.520677) (end 98.149582 81.102259) (width 0.5) (layer F.Cu) (net 5))
(via (at 98.149582 81.102259) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 99.568 86.122) (end 99.568 82.520677) (width 0.5) (layer F.Cu) (net 5))
(via (at 105.55 75.98) (size 0.889) (drill 0.4064) (layers F.Cu B.Cu) (net 5))
(segment (start 105.378 75.808) (end 105.55 75.98) (width 0.5) (layer F.Cu) (net 5))
(segment (start 105.378 72.858) (end 105.378 75.808) (width 0.5) (layer F.Cu) (net 5))
(segment (start 130.556 104.944) (end 130.56 104.94) (width 0.25) (layer B.Cu) (net 6))
(segment (start 130.556 106.4045) (end 130.556 104.944) (width 0.25) (layer B.Cu) (net 6))
(segment (start 130.526 104.964) (end 130.55 104.94) (width 0.25) (layer B.Cu) (net 6))
(segment (start 128.524 104.964) (end 130.526 104.964) (width 0.25) (layer B.Cu) (net 6))
(segment (start 130.556 104.934) (end 130.526 104.964) (width 0.25) (layer B.Cu) (net 6))
(segment (start 130.556 104.4155) (end 130.556 104.934) (width 0.25) (layer B.Cu) (net 6))
(segment (start 132.548926 103.471967) (end 132.548926 104.376415) (width 0.25) (layer F.Cu) (net 6))
(segment (start 130.556 104.4155) (end 132.509841 104.4155) (width 0.25) (layer B.Cu) (net 6))
(segment (start 135.452241 100.568652) (end 132.548926 103.471967) (width 0.25) (layer F.Cu) (net 6))
(via (at 132.548926 104.376415) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 6))
(segment (start 132.509841 104.4155) (end 132.548926 104.376415) (width 0.25) (layer B.Cu) (net 6))
(segment (start 114.238 92.6265) (end 116.078 94.4665) (width 0.5) (layer F.Cu) (net 7))
(segment (start 114.238 92.456) (end 114.238 92.6265) (width 0.5) (layer F.Cu) (net 7))
(segment (start 117.01 94.4665) (end 119.5285 91.948) (width 0.5) (layer F.Cu) (net 7))
(segment (start 116.078 94.4665) (end 117.01 94.4665) (width 0.5) (layer F.Cu) (net 7))
(segment (start 169.148 86.614) (end 171.212 86.614) (width 0.25) (layer F.Cu) (net 8))
(segment (start 171.212 88.884) (end 171.196 88.9) (width 0.25) (layer F.Cu) (net 8))
(segment (start 171.212 86.614) (end 171.212 88.884) (width 0.25) (layer F.Cu) (net 8))
(segment (start 169.132 88.9) (end 171.196 88.9) (width 0.25) (layer F.Cu) (net 8))
(segment (start 169.132 86.63) (end 169.148 86.614) (width 0.25) (layer F.Cu) (net 8))
(segment (start 169.132 88.9) (end 169.132 86.63) (width 0.25) (layer F.Cu) (net 8))
(segment (start 135.805794 90.085794) (end 134.920948 89.200948) (width 0.25) (layer F.Cu) (net 8))
(segment (start 134.920948 89.200948) (end 134.920948 83.851448) (width 0.25) (layer F.Cu) (net 8))
(segment (start 124.9465 73.877) (end 124.9465 73.152) (width 0.25) (layer F.Cu) (net 8))
(segment (start 134.920948 83.851448) (end 124.9465 73.877) (width 0.25) (layer F.Cu) (net 8))
(segment (start 169.148 85.914) (end 165.564 82.33) (width 0.25) (layer F.Cu) (net 8))
(segment (start 169.148 86.614) (end 169.148 85.914) (width 0.25) (layer F.Cu) (net 8))
(segment (start 165.564 82.33) (end 164.5 82.33) (width 0.25) (layer F.Cu) (net 8))
(via (at 138.22 73.91) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 8))
(segment (start 156.08 73.91) (end 138.22 73.91) (width 0.25) (layer F.Cu) (net 8))
(segment (start 164.5 82.33) (end 156.08 73.91) (width 0.25) (layer F.Cu) (net 8))
(via (at 130.09475 79.02525) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 8))
(segment (start 135.21 73.91) (end 130.09475 79.02525) (width 0.25) (layer B.Cu) (net 8))
(segment (start 138.22 73.91) (end 135.21 73.91) (width 0.25) (layer B.Cu) (net 8))
(segment (start 124.9465 73.152) (end 116.562 73.152) (width 0.25) (layer F.Cu) (net 8))
(via (at 111.35 75.1) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 8))
(segment (start 113.298 73.152) (end 111.35 75.1) (width 0.25) (layer F.Cu) (net 8))
(segment (start 116.562 73.152) (end 113.298 73.152) (width 0.25) (layer F.Cu) (net 8))
(segment (start 111.35 75.1) (end 110.87 75.58) (width 0.25) (layer B.Cu) (net 8))
(segment (start 110.87 75.58) (end 110.87 78.68) (width 0.25) (layer B.Cu) (net 8))
(via (at 107.19 78.42) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 8))
(segment (start 110.61 78.42) (end 107.19 78.42) (width 0.25) (layer B.Cu) (net 8))
(segment (start 110.87 78.68) (end 110.61 78.42) (width 0.25) (layer B.Cu) (net 8))
(via (at 96.96 73.86) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 8))
(segment (start 98.376 73.86) (end 99.378 72.858) (width 0.25) (layer B.Cu) (net 8))
(segment (start 96.96 73.86) (end 98.376 73.86) (width 0.25) (layer B.Cu) (net 8))
(segment (start 107.19 78.42) (end 103.275016 78.42) (width 0.25) (layer F.Cu) (net 8))
(segment (start 103.275016 78.42) (end 103.117206 78.26219) (width 0.25) (layer F.Cu) (net 8))
(segment (start 103.117206 78.26219) (end 99.13219 78.26219) (width 0.25) (layer F.Cu) (net 8))
(segment (start 99.13219 78.26219) (end 96.96 76.09) (width 0.25) (layer F.Cu) (net 8))
(segment (start 96.96 76.09) (end 96.96 73.86) (width 0.25) (layer F.Cu) (net 8))
(segment (start 157.734 88.956) (end 157.734 86.1275) (width 0.25) (layer F.Cu) (net 9))
(segment (start 133.047899 95.901926) (end 133.656096 95.901926) (width 0.25) (layer F.Cu) (net 9))
(segment (start 131.916707 97.033118) (end 133.047899 95.901926) (width 0.25) (layer F.Cu) (net 9))
(via (at 133.656096 95.901926) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 9))
(segment (start 161.81081 93.03281) (end 162.707595 93.03281) (width 0.25) (layer F.Cu) (net 9))
(via (at 162.707595 93.03281) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 9))
(segment (start 157.734 88.956) (end 161.81081 93.03281) (width 0.25) (layer F.Cu) (net 9))
(segment (start 133.828222 95.901926) (end 134.556754 95.173394) (width 0.25) (layer B.Cu) (net 9))
(segment (start 148.623489 95.173393) (end 149.253228 95.803134) (width 0.25) (layer B.Cu) (net 9))
(segment (start 155.911858 95.803134) (end 158.682182 93.03281) (width 0.25) (layer B.Cu) (net 9))
(segment (start 133.656096 95.901926) (end 133.828222 95.901926) (width 0.25) (layer B.Cu) (net 9))
(segment (start 134.556754 95.173394) (end 148.623489 95.173393) (width 0.25) (layer B.Cu) (net 9))
(segment (start 149.253228 95.803134) (end 155.911858 95.803134) (width 0.25) (layer B.Cu) (net 9))
(segment (start 158.682182 93.03281) (end 162.707595 93.03281) (width 0.25) (layer B.Cu) (net 9))
(segment (start 160.274 88.956) (end 160.274 86.1275) (width 0.25) (layer F.Cu) (net 10))
(segment (start 131.563154 96.679565) (end 133.317321 94.925398) (width 0.25) (layer F.Cu) (net 10))
(segment (start 133.317321 94.925398) (end 13