You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
182 lines
14 KiB
C
182 lines
14 KiB
C
/**
|
|
* \file
|
|
*
|
|
* \brief Instance description for SERCOM1
|
|
*
|
|
* Copyright (c) 2019 Microchip Technology Inc.
|
|
*
|
|
* \asf_license_start
|
|
*
|
|
* \page License
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
|
* not use this file except in compliance with the License.
|
|
* You may obtain a copy of the Licence at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
* \asf_license_stop
|
|
*
|
|
*/
|
|
|
|
#ifndef _SAME54_SERCOM1_INSTANCE_
|
|
#define _SAME54_SERCOM1_INSTANCE_
|
|
|
|
/* ========== Register definition for SERCOM1 peripheral ========== */
|
|
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
|
|
#define REG_SERCOM1_I2CM_CTRLA (0x40003400) /**< \brief (SERCOM1) I2CM Control A */
|
|
#define REG_SERCOM1_I2CM_CTRLB (0x40003404) /**< \brief (SERCOM1) I2CM Control B */
|
|
#define REG_SERCOM1_I2CM_CTRLC (0x40003408) /**< \brief (SERCOM1) I2CM Control C */
|
|
#define REG_SERCOM1_I2CM_BAUD (0x4000340C) /**< \brief (SERCOM1) I2CM Baud Rate */
|
|
#define REG_SERCOM1_I2CM_INTENCLR (0x40003414) /**< \brief (SERCOM1) I2CM Interrupt Enable Clear */
|
|
#define REG_SERCOM1_I2CM_INTENSET (0x40003416) /**< \brief (SERCOM1) I2CM Interrupt Enable Set */
|
|
#define REG_SERCOM1_I2CM_INTFLAG (0x40003418) /**< \brief (SERCOM1) I2CM Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM1_I2CM_STATUS (0x4000341A) /**< \brief (SERCOM1) I2CM Status */
|
|
#define REG_SERCOM1_I2CM_SYNCBUSY (0x4000341C) /**< \brief (SERCOM1) I2CM Synchronization Busy */
|
|
#define REG_SERCOM1_I2CM_ADDR (0x40003424) /**< \brief (SERCOM1) I2CM Address */
|
|
#define REG_SERCOM1_I2CM_DATA (0x40003428) /**< \brief (SERCOM1) I2CM Data */
|
|
#define REG_SERCOM1_I2CM_DBGCTRL (0x40003430) /**< \brief (SERCOM1) I2CM Debug Control */
|
|
#define REG_SERCOM1_I2CS_CTRLA (0x40003400) /**< \brief (SERCOM1) I2CS Control A */
|
|
#define REG_SERCOM1_I2CS_CTRLB (0x40003404) /**< \brief (SERCOM1) I2CS Control B */
|
|
#define REG_SERCOM1_I2CS_CTRLC (0x40003408) /**< \brief (SERCOM1) I2CS Control C */
|
|
#define REG_SERCOM1_I2CS_INTENCLR (0x40003414) /**< \brief (SERCOM1) I2CS Interrupt Enable Clear */
|
|
#define REG_SERCOM1_I2CS_INTENSET (0x40003416) /**< \brief (SERCOM1) I2CS Interrupt Enable Set */
|
|
#define REG_SERCOM1_I2CS_INTFLAG (0x40003418) /**< \brief (SERCOM1) I2CS Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM1_I2CS_STATUS (0x4000341A) /**< \brief (SERCOM1) I2CS Status */
|
|
#define REG_SERCOM1_I2CS_SYNCBUSY (0x4000341C) /**< \brief (SERCOM1) I2CS Synchronization Busy */
|
|
#define REG_SERCOM1_I2CS_LENGTH (0x40003422) /**< \brief (SERCOM1) I2CS Length */
|
|
#define REG_SERCOM1_I2CS_ADDR (0x40003424) /**< \brief (SERCOM1) I2CS Address */
|
|
#define REG_SERCOM1_I2CS_DATA (0x40003428) /**< \brief (SERCOM1) I2CS Data */
|
|
#define REG_SERCOM1_SPI_CTRLA (0x40003400) /**< \brief (SERCOM1) SPI Control A */
|
|
#define REG_SERCOM1_SPI_CTRLB (0x40003404) /**< \brief (SERCOM1) SPI Control B */
|
|
#define REG_SERCOM1_SPI_CTRLC (0x40003408) /**< \brief (SERCOM1) SPI Control C */
|
|
#define REG_SERCOM1_SPI_BAUD (0x4000340C) /**< \brief (SERCOM1) SPI Baud Rate */
|
|
#define REG_SERCOM1_SPI_INTENCLR (0x40003414) /**< \brief (SERCOM1) SPI Interrupt Enable Clear */
|
|
#define REG_SERCOM1_SPI_INTENSET (0x40003416) /**< \brief (SERCOM1) SPI Interrupt Enable Set */
|
|
#define REG_SERCOM1_SPI_INTFLAG (0x40003418) /**< \brief (SERCOM1) SPI Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM1_SPI_STATUS (0x4000341A) /**< \brief (SERCOM1) SPI Status */
|
|
#define REG_SERCOM1_SPI_SYNCBUSY (0x4000341C) /**< \brief (SERCOM1) SPI Synchronization Busy */
|
|
#define REG_SERCOM1_SPI_LENGTH (0x40003422) /**< \brief (SERCOM1) SPI Length */
|
|
#define REG_SERCOM1_SPI_ADDR (0x40003424) /**< \brief (SERCOM1) SPI Address */
|
|
#define REG_SERCOM1_SPI_DATA (0x40003428) /**< \brief (SERCOM1) SPI Data */
|
|
#define REG_SERCOM1_SPI_DBGCTRL (0x40003430) /**< \brief (SERCOM1) SPI Debug Control */
|
|
#define REG_SERCOM1_USART_CTRLA (0x40003400) /**< \brief (SERCOM1) USART Control A */
|
|
#define REG_SERCOM1_USART_CTRLB (0x40003404) /**< \brief (SERCOM1) USART Control B */
|
|
#define REG_SERCOM1_USART_CTRLC (0x40003408) /**< \brief (SERCOM1) USART Control C */
|
|
#define REG_SERCOM1_USART_BAUD (0x4000340C) /**< \brief (SERCOM1) USART Baud Rate */
|
|
#define REG_SERCOM1_USART_RXPL (0x4000340E) /**< \brief (SERCOM1) USART Receive Pulse Length */
|
|
#define REG_SERCOM1_USART_INTENCLR (0x40003414) /**< \brief (SERCOM1) USART Interrupt Enable Clear */
|
|
#define REG_SERCOM1_USART_INTENSET (0x40003416) /**< \brief (SERCOM1) USART Interrupt Enable Set */
|
|
#define REG_SERCOM1_USART_INTFLAG (0x40003418) /**< \brief (SERCOM1) USART Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM1_USART_STATUS (0x4000341A) /**< \brief (SERCOM1) USART Status */
|
|
#define REG_SERCOM1_USART_SYNCBUSY (0x4000341C) /**< \brief (SERCOM1) USART Synchronization Busy */
|
|
#define REG_SERCOM1_USART_RXERRCNT (0x40003420) /**< \brief (SERCOM1) USART Receive Error Count */
|
|
#define REG_SERCOM1_USART_LENGTH (0x40003422) /**< \brief (SERCOM1) USART Length */
|
|
#define REG_SERCOM1_USART_DATA (0x40003428) /**< \brief (SERCOM1) USART Data */
|
|
#define REG_SERCOM1_USART_DBGCTRL (0x40003430) /**< \brief (SERCOM1) USART Debug Control */
|
|
#else
|
|
#define REG_SERCOM1_I2CM_CTRLA (*(RwReg *)0x40003400UL) /**< \brief (SERCOM1) I2CM Control A */
|
|
#define REG_SERCOM1_I2CM_CTRLB (*(RwReg *)0x40003404UL) /**< \brief (SERCOM1) I2CM Control B */
|
|
#define REG_SERCOM1_I2CM_CTRLC (*(RwReg *)0x40003408UL) /**< \brief (SERCOM1) I2CM Control C */
|
|
#define REG_SERCOM1_I2CM_BAUD (*(RwReg *)0x4000340CUL) /**< \brief (SERCOM1) I2CM Baud Rate */
|
|
#define REG_SERCOM1_I2CM_INTENCLR (*(RwReg8 *)0x40003414UL) /**< \brief (SERCOM1) I2CM Interrupt Enable Clear */
|
|
#define REG_SERCOM1_I2CM_INTENSET (*(RwReg8 *)0x40003416UL) /**< \brief (SERCOM1) I2CM Interrupt Enable Set */
|
|
#define REG_SERCOM1_I2CM_INTFLAG (*(RwReg8 *)0x40003418UL) /**< \brief (SERCOM1) I2CM Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM1_I2CM_STATUS (*(RwReg16*)0x4000341AUL) /**< \brief (SERCOM1) I2CM Status */
|
|
#define REG_SERCOM1_I2CM_SYNCBUSY (*(RoReg *)0x4000341CUL) /**< \brief (SERCOM1) I2CM Synchronization Busy */
|
|
#define REG_SERCOM1_I2CM_ADDR (*(RwReg *)0x40003424UL) /**< \brief (SERCOM1) I2CM Address */
|
|
#define REG_SERCOM1_I2CM_DATA (*(RwReg *)0x40003428UL) /**< \brief (SERCOM1) I2CM Data */
|
|
#define REG_SERCOM1_I2CM_DBGCTRL (*(RwReg8 *)0x40003430UL) /**< \brief (SERCOM1) I2CM Debug Control */
|
|
#define REG_SERCOM1_I2CS_CTRLA (*(RwReg *)0x40003400UL) /**< \brief (SERCOM1) I2CS Control A */
|
|
#define REG_SERCOM1_I2CS_CTRLB (*(RwReg *)0x40003404UL) /**< \brief (SERCOM1) I2CS Control B */
|
|
#define REG_SERCOM1_I2CS_CTRLC (*(RwReg *)0x40003408UL) /**< \brief (SERCOM1) I2CS Control C */
|
|
#define REG_SERCOM1_I2CS_INTENCLR (*(RwReg8 *)0x40003414UL) /**< \brief (SERCOM1) I2CS Interrupt Enable Clear */
|
|
#define REG_SERCOM1_I2CS_INTENSET (*(RwReg8 *)0x40003416UL) /**< \brief (SERCOM1) I2CS Interrupt Enable Set */
|
|
#define REG_SERCOM1_I2CS_INTFLAG (*(RwReg8 *)0x40003418UL) /**< \brief (SERCOM1) I2CS Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM1_I2CS_STATUS (*(RwReg16*)0x4000341AUL) /**< \brief (SERCOM1) I2CS Status */
|
|
#define REG_SERCOM1_I2CS_SYNCBUSY (*(RoReg *)0x4000341CUL) /**< \brief (SERCOM1) I2CS Synchronization Busy */
|
|
#define REG_SERCOM1_I2CS_LENGTH (*(RwReg16*)0x40003422UL) /**< \brief (SERCOM1) I2CS Length */
|
|
#define REG_SERCOM1_I2CS_ADDR (*(RwReg *)0x40003424UL) /**< \brief (SERCOM1) I2CS Address */
|
|
#define REG_SERCOM1_I2CS_DATA (*(RwReg *)0x40003428UL) /**< \brief (SERCOM1) I2CS Data */
|
|
#define REG_SERCOM1_SPI_CTRLA (*(RwReg *)0x40003400UL) /**< \brief (SERCOM1) SPI Control A */
|
|
#define REG_SERCOM1_SPI_CTRLB (*(RwReg *)0x40003404UL) /**< \brief (SERCOM1) SPI Control B */
|
|
#define REG_SERCOM1_SPI_CTRLC (*(RwReg *)0x40003408UL) /**< \brief (SERCOM1) SPI Control C */
|
|
#define REG_SERCOM1_SPI_BAUD (*(RwReg8 *)0x4000340CUL) /**< \brief (SERCOM1) SPI Baud Rate */
|
|
#define REG_SERCOM1_SPI_INTENCLR (*(RwReg8 *)0x40003414UL) /**< \brief (SERCOM1) SPI Interrupt Enable Clear */
|
|
#define REG_SERCOM1_SPI_INTENSET (*(RwReg8 *)0x40003416UL) /**< \brief (SERCOM1) SPI Interrupt Enable Set */
|
|
#define REG_SERCOM1_SPI_INTFLAG (*(RwReg8 *)0x40003418UL) /**< \brief (SERCOM1) SPI Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM1_SPI_STATUS (*(RwReg16*)0x4000341AUL) /**< \brief (SERCOM1) SPI Status */
|
|
#define REG_SERCOM1_SPI_SYNCBUSY (*(RoReg *)0x4000341CUL) /**< \brief (SERCOM1) SPI Synchronization Busy */
|
|
#define REG_SERCOM1_SPI_LENGTH (*(RwReg16*)0x40003422UL) /**< \brief (SERCOM1) SPI Length */
|
|
#define REG_SERCOM1_SPI_ADDR (*(RwReg *)0x40003424UL) /**< \brief (SERCOM1) SPI Address */
|
|
#define REG_SERCOM1_SPI_DATA (*(RwReg *)0x40003428UL) /**< \brief (SERCOM1) SPI Data */
|
|
#define REG_SERCOM1_SPI_DBGCTRL (*(RwReg8 *)0x40003430UL) /**< \brief (SERCOM1) SPI Debug Control */
|
|
#define REG_SERCOM1_USART_CTRLA (*(RwReg *)0x40003400UL) /**< \brief (SERCOM1) USART Control A */
|
|
#define REG_SERCOM1_USART_CTRLB (*(RwReg *)0x40003404UL) /**< \brief (SERCOM1) USART Control B */
|
|
#define REG_SERCOM1_USART_CTRLC (*(RwReg *)0x40003408UL) /**< \brief (SERCOM1) USART Control C */
|
|
#define REG_SERCOM1_USART_BAUD (*(RwReg16*)0x4000340CUL) /**< \brief (SERCOM1) USART Baud Rate */
|
|
#define REG_SERCOM1_USART_RXPL (*(RwReg8 *)0x4000340EUL) /**< \brief (SERCOM1) USART Receive Pulse Length */
|
|
#define REG_SERCOM1_USART_INTENCLR (*(RwReg8 *)0x40003414UL) /**< \brief (SERCOM1) USART Interrupt Enable Clear */
|
|
#define REG_SERCOM1_USART_INTENSET (*(RwReg8 *)0x40003416UL) /**< \brief (SERCOM1) USART Interrupt Enable Set */
|
|
#define REG_SERCOM1_USART_INTFLAG (*(RwReg8 *)0x40003418UL) /**< \brief (SERCOM1) USART Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM1_USART_STATUS (*(RwReg16*)0x4000341AUL) /**< \brief (SERCOM1) USART Status */
|
|
#define REG_SERCOM1_USART_SYNCBUSY (*(RoReg *)0x4000341CUL) /**< \brief (SERCOM1) USART Synchronization Busy */
|
|
#define REG_SERCOM1_USART_RXERRCNT (*(RoReg8 *)0x40003420UL) /**< \brief (SERCOM1) USART Receive Error Count */
|
|
#define REG_SERCOM1_USART_LENGTH (*(RwReg16*)0x40003422UL) /**< \brief (SERCOM1) USART Length */
|
|
#define REG_SERCOM1_USART_DATA (*(RwReg *)0x40003428UL) /**< \brief (SERCOM1) USART Data */
|
|
#define REG_SERCOM1_USART_DBGCTRL (*(RwReg8 *)0x40003430UL) /**< \brief (SERCOM1) USART Debug Control */
|
|
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
|
|
|
|
/* ========== Instance parameters for SERCOM1 peripheral ========== */
|
|
#define SERCOM1_CLK_REDUCTION 1 // Reduce clock options to pin 1 for SPI and USART
|
|
#define SERCOM1_DLY_COMPENSATION 1 // Compensates for a fast DLY50 element. Assuming 20ns
|
|
#define SERCOM1_DMA 1 // DMA support implemented?
|
|
#define SERCOM1_DMAC_ID_RX 6 // Index of DMA RX trigger
|
|
#define SERCOM1_DMAC_ID_TX 7 // Index of DMA TX trigger
|
|
#define SERCOM1_FIFO_DEPTH_POWER 1 // 2^FIFO_DEPTH_POWER gives rx FIFO depth.
|
|
#define SERCOM1_GCLK_ID_CORE 8
|
|
#define SERCOM1_GCLK_ID_SLOW 3
|
|
#define SERCOM1_INT_MSB 6
|
|
#define SERCOM1_I2CM 1 // I2C Master mode implemented?
|
|
#define SERCOM1_I2CS 1 // I2C Slave mode implemented?
|
|
#define SERCOM1_I2CS_AUTO_ACK 1 // I2C slave automatic acknowledge implemented?
|
|
#define SERCOM1_I2CS_GROUP_CMD 1 // I2C slave group command implemented?
|
|
#define SERCOM1_I2CS_SDASETUP_CNT_SIZE 8 // I2CS sda setup count size
|
|
#define SERCOM1_I2CS_SDASETUP_SIZE 4 // I2CS sda setup size
|
|
#define SERCOM1_I2CS_SUDAT 1 // I2C slave SDA setup implemented?
|
|
#define SERCOM1_I2C_FASTMP 1 // I2C fast mode plus implemented?
|
|
#define SERCOM1_I2C_HSMODE 1 // USART mode implemented?
|
|
#define SERCOM1_I2C_SCLSM_MODE 1 // I2C SCL clock stretch mode implemented?
|
|
#define SERCOM1_I2C_SMB_TIMEOUTS 1 // I2C SMBus timeouts implemented?
|
|
#define SERCOM1_I2C_TENBIT_ADR 1 // I2C ten bit enabled?
|
|
#define SERCOM1_PMSB 3
|
|
#define SERCOM1_RETENTION_SUPPORT 0 // Retention supported?
|
|
#define SERCOM1_SE_CNT 1 // SE counter included?
|
|
#define SERCOM1_SPI 1 // SPI mode implemented?
|
|
#define SERCOM1_SPI_HW_SS_CTRL 1 // Master _SS hardware control implemented?
|
|
#define SERCOM1_SPI_ICSPACE_EXT 1 // SPI inter character space implemented?
|
|
#define SERCOM1_SPI_OZMO 0 // OZMO features implemented?
|
|
#define SERCOM1_SPI_WAKE_ON_SSL 1 // _SS low detect implemented?
|
|
#define SERCOM1_TTBIT_EXTENSION 1 // 32-bit extension implemented?
|
|
#define SERCOM1_USART 1 // USART mode implemented?
|
|
#define SERCOM1_USART_AUTOBAUD 1 // USART autobaud implemented?
|
|
#define SERCOM1_USART_COLDET 1 // USART collision detection implemented?
|
|
#define SERCOM1_USART_FLOW_CTRL 1 // USART flow control implemented?
|
|
#define SERCOM1_USART_FRAC_BAUD 1 // USART fractional BAUD implemented?
|
|
#define SERCOM1_USART_IRDA 1 // USART IrDA implemented?
|
|
#define SERCOM1_USART_ISO7816 1 // USART ISO7816 mode implemented?
|
|
#define SERCOM1_USART_LIN_MASTER 1 // USART LIN Master mode implemented?
|
|
#define SERCOM1_USART_RS485 1 // USART RS485 mode implemented?
|
|
#define SERCOM1_USART_SAMPA_EXT 1 // USART sample adjust implemented?
|
|
#define SERCOM1_USART_SAMPR_EXT 1 // USART oversampling adjustment implemented?
|
|
|
|
#endif /* _SAME54_SERCOM1_INSTANCE_ */
|