You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
195 lines
19 KiB
C
195 lines
19 KiB
C
/**
|
|
* \brief Component description for PM
|
|
*
|
|
* Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
|
|
*
|
|
* Subject to your compliance with these terms, you may use Microchip software and any derivatives
|
|
* exclusively with Microchip products. It is your responsibility to comply with third party license
|
|
* terms applicable to your use of third party software (including open source software) that may
|
|
* accompany Microchip software.
|
|
*
|
|
* THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY,
|
|
* APPLY TO THIS SOFTWARE, INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND
|
|
* FITNESS FOR A PARTICULAR PURPOSE.
|
|
*
|
|
* IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
|
|
* LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF
|
|
* MICROCHIP HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT
|
|
* ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY RELATED TO THIS SOFTWARE WILL NOT
|
|
* EXCEED THE AMOUNT OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
/* file generated from device description version 2020-03-12T17:27:04Z */
|
|
#ifndef _SAME54_PM_COMPONENT_H_
|
|
#define _SAME54_PM_COMPONENT_H_
|
|
|
|
/* ************************************************************************** */
|
|
/* SOFTWARE API DEFINITION FOR PM */
|
|
/* ************************************************************************** */
|
|
|
|
/* -------- PM_CTRLA : (PM Offset: 0x00) (R/W 8) Control A -------- */
|
|
#define PM_CTRLA_RESETVALUE _U_(0x00) /**< (PM_CTRLA) Control A Reset Value */
|
|
|
|
#define PM_CTRLA_IORET_Pos _U_(2) /**< (PM_CTRLA) I/O Retention Position */
|
|
#define PM_CTRLA_IORET_Msk (_U_(0x1) << PM_CTRLA_IORET_Pos) /**< (PM_CTRLA) I/O Retention Mask */
|
|
#define PM_CTRLA_IORET(value) (PM_CTRLA_IORET_Msk & ((value) << PM_CTRLA_IORET_Pos))
|
|
#define PM_CTRLA_Msk _U_(0x04) /**< (PM_CTRLA) Register Mask */
|
|
|
|
|
|
/* -------- PM_SLEEPCFG : (PM Offset: 0x01) (R/W 8) Sleep Configuration -------- */
|
|
#define PM_SLEEPCFG_RESETVALUE _U_(0x02) /**< (PM_SLEEPCFG) Sleep Configuration Reset Value */
|
|
|
|
#define PM_SLEEPCFG_SLEEPMODE_Pos _U_(0) /**< (PM_SLEEPCFG) Sleep Mode Position */
|
|
#define PM_SLEEPCFG_SLEEPMODE_Msk (_U_(0x7) << PM_SLEEPCFG_SLEEPMODE_Pos) /**< (PM_SLEEPCFG) Sleep Mode Mask */
|
|
#define PM_SLEEPCFG_SLEEPMODE(value) (PM_SLEEPCFG_SLEEPMODE_Msk & ((value) << PM_SLEEPCFG_SLEEPMODE_Pos))
|
|
#define PM_SLEEPCFG_SLEEPMODE_IDLE_Val _U_(0x2) /**< (PM_SLEEPCFG) CPU, AHBx, and APBx clocks are OFF */
|
|
#define PM_SLEEPCFG_SLEEPMODE_STANDBY_Val _U_(0x4) /**< (PM_SLEEPCFG) All Clocks are OFF */
|
|
#define PM_SLEEPCFG_SLEEPMODE_HIBERNATE_Val _U_(0x5) /**< (PM_SLEEPCFG) Backup domain is ON as well as some PDRAMs */
|
|
#define PM_SLEEPCFG_SLEEPMODE_BACKUP_Val _U_(0x6) /**< (PM_SLEEPCFG) Only Backup domain is powered ON */
|
|
#define PM_SLEEPCFG_SLEEPMODE_OFF_Val _U_(0x7) /**< (PM_SLEEPCFG) All power domains are powered OFF */
|
|
#define PM_SLEEPCFG_SLEEPMODE_IDLE (PM_SLEEPCFG_SLEEPMODE_IDLE_Val << PM_SLEEPCFG_SLEEPMODE_Pos) /**< (PM_SLEEPCFG) CPU, AHBx, and APBx clocks are OFF Position */
|
|
#define PM_SLEEPCFG_SLEEPMODE_STANDBY (PM_SLEEPCFG_SLEEPMODE_STANDBY_Val << PM_SLEEPCFG_SLEEPMODE_Pos) /**< (PM_SLEEPCFG) All Clocks are OFF Position */
|
|
#define PM_SLEEPCFG_SLEEPMODE_HIBERNATE (PM_SLEEPCFG_SLEEPMODE_HIBERNATE_Val << PM_SLEEPCFG_SLEEPMODE_Pos) /**< (PM_SLEEPCFG) Backup domain is ON as well as some PDRAMs Position */
|
|
#define PM_SLEEPCFG_SLEEPMODE_BACKUP (PM_SLEEPCFG_SLEEPMODE_BACKUP_Val << PM_SLEEPCFG_SLEEPMODE_Pos) /**< (PM_SLEEPCFG) Only Backup domain is powered ON Position */
|
|
#define PM_SLEEPCFG_SLEEPMODE_OFF (PM_SLEEPCFG_SLEEPMODE_OFF_Val << PM_SLEEPCFG_SLEEPMODE_Pos) /**< (PM_SLEEPCFG) All power domains are powered OFF Position */
|
|
#define PM_SLEEPCFG_Msk _U_(0x07) /**< (PM_SLEEPCFG) Register Mask */
|
|
|
|
|
|
/* -------- PM_INTENCLR : (PM Offset: 0x04) (R/W 8) Interrupt Enable Clear -------- */
|
|
#define PM_INTENCLR_RESETVALUE _U_(0x00) /**< (PM_INTENCLR) Interrupt Enable Clear Reset Value */
|
|
|
|
#define PM_INTENCLR_SLEEPRDY_Pos _U_(0) /**< (PM_INTENCLR) Sleep Mode Entry Ready Enable Position */
|
|
#define PM_INTENCLR_SLEEPRDY_Msk (_U_(0x1) << PM_INTENCLR_SLEEPRDY_Pos) /**< (PM_INTENCLR) Sleep Mode Entry Ready Enable Mask */
|
|
#define PM_INTENCLR_SLEEPRDY(value) (PM_INTENCLR_SLEEPRDY_Msk & ((value) << PM_INTENCLR_SLEEPRDY_Pos))
|
|
#define PM_INTENCLR_Msk _U_(0x01) /**< (PM_INTENCLR) Register Mask */
|
|
|
|
|
|
/* -------- PM_INTENSET : (PM Offset: 0x05) (R/W 8) Interrupt Enable Set -------- */
|
|
#define PM_INTENSET_RESETVALUE _U_(0x00) /**< (PM_INTENSET) Interrupt Enable Set Reset Value */
|
|
|
|
#define PM_INTENSET_SLEEPRDY_Pos _U_(0) /**< (PM_INTENSET) Sleep Mode Entry Ready Enable Position */
|
|
#define PM_INTENSET_SLEEPRDY_Msk (_U_(0x1) << PM_INTENSET_SLEEPRDY_Pos) /**< (PM_INTENSET) Sleep Mode Entry Ready Enable Mask */
|
|
#define PM_INTENSET_SLEEPRDY(value) (PM_INTENSET_SLEEPRDY_Msk & ((value) << PM_INTENSET_SLEEPRDY_Pos))
|
|
#define PM_INTENSET_Msk _U_(0x01) /**< (PM_INTENSET) Register Mask */
|
|
|
|
|
|
/* -------- PM_INTFLAG : (PM Offset: 0x06) (R/W 8) Interrupt Flag Status and Clear -------- */
|
|
#define PM_INTFLAG_RESETVALUE _U_(0x00) /**< (PM_INTFLAG) Interrupt Flag Status and Clear Reset Value */
|
|
|
|
#define PM_INTFLAG_SLEEPRDY_Pos _U_(0) /**< (PM_INTFLAG) Sleep Mode Entry Ready Position */
|
|
#define PM_INTFLAG_SLEEPRDY_Msk (_U_(0x1) << PM_INTFLAG_SLEEPRDY_Pos) /**< (PM_INTFLAG) Sleep Mode Entry Ready Mask */
|
|
#define PM_INTFLAG_SLEEPRDY(value) (PM_INTFLAG_SLEEPRDY_Msk & ((value) << PM_INTFLAG_SLEEPRDY_Pos))
|
|
#define PM_INTFLAG_Msk _U_(0x01) /**< (PM_INTFLAG) Register Mask */
|
|
|
|
|
|
/* -------- PM_STDBYCFG : (PM Offset: 0x08) (R/W 8) Standby Configuration -------- */
|
|
#define PM_STDBYCFG_RESETVALUE _U_(0x00) /**< (PM_STDBYCFG) Standby Configuration Reset Value */
|
|
|
|
#define PM_STDBYCFG_RAMCFG_Pos _U_(0) /**< (PM_STDBYCFG) Ram Configuration Position */
|
|
#define PM_STDBYCFG_RAMCFG_Msk (_U_(0x3) << PM_STDBYCFG_RAMCFG_Pos) /**< (PM_STDBYCFG) Ram Configuration Mask */
|
|
#define PM_STDBYCFG_RAMCFG(value) (PM_STDBYCFG_RAMCFG_Msk & ((value) << PM_STDBYCFG_RAMCFG_Pos))
|
|
#define PM_STDBYCFG_RAMCFG_RET_Val _U_(0x0) /**< (PM_STDBYCFG) All the system RAM is retained */
|
|
#define PM_STDBYCFG_RAMCFG_PARTIAL_Val _U_(0x1) /**< (PM_STDBYCFG) Only the first 32Kbytes of the system RAM is retained */
|
|
#define PM_STDBYCFG_RAMCFG_OFF_Val _U_(0x2) /**< (PM_STDBYCFG) All the system RAM is turned OFF */
|
|
#define PM_STDBYCFG_RAMCFG_RET (PM_STDBYCFG_RAMCFG_RET_Val << PM_STDBYCFG_RAMCFG_Pos) /**< (PM_STDBYCFG) All the system RAM is retained Position */
|
|
#define PM_STDBYCFG_RAMCFG_PARTIAL (PM_STDBYCFG_RAMCFG_PARTIAL_Val << PM_STDBYCFG_RAMCFG_Pos) /**< (PM_STDBYCFG) Only the first 32Kbytes of the system RAM is retained Position */
|
|
#define PM_STDBYCFG_RAMCFG_OFF (PM_STDBYCFG_RAMCFG_OFF_Val << PM_STDBYCFG_RAMCFG_Pos) /**< (PM_STDBYCFG) All the system RAM is turned OFF Position */
|
|
#define PM_STDBYCFG_FASTWKUP_Pos _U_(4) /**< (PM_STDBYCFG) Fast Wakeup Position */
|
|
#define PM_STDBYCFG_FASTWKUP_Msk (_U_(0x3) << PM_STDBYCFG_FASTWKUP_Pos) /**< (PM_STDBYCFG) Fast Wakeup Mask */
|
|
#define PM_STDBYCFG_FASTWKUP(value) (PM_STDBYCFG_FASTWKUP_Msk & ((value) << PM_STDBYCFG_FASTWKUP_Pos))
|
|
#define PM_STDBYCFG_FASTWKUP_NO_Val _U_(0x0) /**< (PM_STDBYCFG) Fast Wakeup is disabled */
|
|
#define PM_STDBYCFG_FASTWKUP_NVM_Val _U_(0x1) /**< (PM_STDBYCFG) Fast Wakeup is enabled on NVM */
|
|
#define PM_STDBYCFG_FASTWKUP_MAINVREG_Val _U_(0x2) /**< (PM_STDBYCFG) Fast Wakeup is enabled on the main voltage regulator (MAINVREG) */
|
|
#define PM_STDBYCFG_FASTWKUP_BOTH_Val _U_(0x3) /**< (PM_STDBYCFG) Fast Wakeup is enabled on both NVM and MAINVREG */
|
|
#define PM_STDBYCFG_FASTWKUP_NO (PM_STDBYCFG_FASTWKUP_NO_Val << PM_STDBYCFG_FASTWKUP_Pos) /**< (PM_STDBYCFG) Fast Wakeup is disabled Position */
|
|
#define PM_STDBYCFG_FASTWKUP_NVM (PM_STDBYCFG_FASTWKUP_NVM_Val << PM_STDBYCFG_FASTWKUP_Pos) /**< (PM_STDBYCFG) Fast Wakeup is enabled on NVM Position */
|
|
#define PM_STDBYCFG_FASTWKUP_MAINVREG (PM_STDBYCFG_FASTWKUP_MAINVREG_Val << PM_STDBYCFG_FASTWKUP_Pos) /**< (PM_STDBYCFG) Fast Wakeup is enabled on the main voltage regulator (MAINVREG) Position */
|
|
#define PM_STDBYCFG_FASTWKUP_BOTH (PM_STDBYCFG_FASTWKUP_BOTH_Val << PM_STDBYCFG_FASTWKUP_Pos) /**< (PM_STDBYCFG) Fast Wakeup is enabled on both NVM and MAINVREG Position */
|
|
#define PM_STDBYCFG_Msk _U_(0x33) /**< (PM_STDBYCFG) Register Mask */
|
|
|
|
|
|
/* -------- PM_HIBCFG : (PM Offset: 0x09) (R/W 8) Hibernate Configuration -------- */
|
|
#define PM_HIBCFG_RESETVALUE _U_(0x00) /**< (PM_HIBCFG) Hibernate Configuration Reset Value */
|
|
|
|
#define PM_HIBCFG_RAMCFG_Pos _U_(0) /**< (PM_HIBCFG) Ram Configuration Position */
|
|
#define PM_HIBCFG_RAMCFG_Msk (_U_(0x3) << PM_HIBCFG_RAMCFG_Pos) /**< (PM_HIBCFG) Ram Configuration Mask */
|
|
#define PM_HIBCFG_RAMCFG(value) (PM_HIBCFG_RAMCFG_Msk & ((value) << PM_HIBCFG_RAMCFG_Pos))
|
|
#define PM_HIBCFG_RAMCFG_RET_Val _U_(0x0) /**< (PM_HIBCFG) All the system RAM is retained */
|
|
#define PM_HIBCFG_RAMCFG_PARTIAL_Val _U_(0x1) /**< (PM_HIBCFG) Only the first 32Kbytes of the system RAM is retained */
|
|
#define PM_HIBCFG_RAMCFG_OFF_Val _U_(0x2) /**< (PM_HIBCFG) All the system RAM is turned OFF */
|
|
#define PM_HIBCFG_RAMCFG_RET (PM_HIBCFG_RAMCFG_RET_Val << PM_HIBCFG_RAMCFG_Pos) /**< (PM_HIBCFG) All the system RAM is retained Position */
|
|
#define PM_HIBCFG_RAMCFG_PARTIAL (PM_HIBCFG_RAMCFG_PARTIAL_Val << PM_HIBCFG_RAMCFG_Pos) /**< (PM_HIBCFG) Only the first 32Kbytes of the system RAM is retained Position */
|
|
#define PM_HIBCFG_RAMCFG_OFF (PM_HIBCFG_RAMCFG_OFF_Val << PM_HIBCFG_RAMCFG_Pos) /**< (PM_HIBCFG) All the system RAM is turned OFF Position */
|
|
#define PM_HIBCFG_BRAMCFG_Pos _U_(2) /**< (PM_HIBCFG) Backup Ram Configuration Position */
|
|
#define PM_HIBCFG_BRAMCFG_Msk (_U_(0x3) << PM_HIBCFG_BRAMCFG_Pos) /**< (PM_HIBCFG) Backup Ram Configuration Mask */
|
|
#define PM_HIBCFG_BRAMCFG(value) (PM_HIBCFG_BRAMCFG_Msk & ((value) << PM_HIBCFG_BRAMCFG_Pos))
|
|
#define PM_HIBCFG_BRAMCFG_RET_Val _U_(0x0) /**< (PM_HIBCFG) All the backup RAM is retained */
|
|
#define PM_HIBCFG_BRAMCFG_PARTIAL_Val _U_(0x1) /**< (PM_HIBCFG) Only the first 4Kbytes of the backup RAM is retained */
|
|
#define PM_HIBCFG_BRAMCFG_OFF_Val _U_(0x2) /**< (PM_HIBCFG) All the backup RAM is turned OFF */
|
|
#define PM_HIBCFG_BRAMCFG_RET (PM_HIBCFG_BRAMCFG_RET_Val << PM_HIBCFG_BRAMCFG_Pos) /**< (PM_HIBCFG) All the backup RAM is retained Position */
|
|
#define PM_HIBCFG_BRAMCFG_PARTIAL (PM_HIBCFG_BRAMCFG_PARTIAL_Val << PM_HIBCFG_BRAMCFG_Pos) /**< (PM_HIBCFG) Only the first 4Kbytes of the backup RAM is retained Position */
|
|
#define PM_HIBCFG_BRAMCFG_OFF (PM_HIBCFG_BRAMCFG_OFF_Val << PM_HIBCFG_BRAMCFG_Pos) /**< (PM_HIBCFG) All the backup RAM is turned OFF Position */
|
|
#define PM_HIBCFG_Msk _U_(0x0F) /**< (PM_HIBCFG) Register Mask */
|
|
|
|
|
|
/* -------- PM_BKUPCFG : (PM Offset: 0x0A) (R/W 8) Backup Configuration -------- */
|
|
#define PM_BKUPCFG_RESETVALUE _U_(0x00) /**< (PM_BKUPCFG) Backup Configuration Reset Value */
|
|
|
|
#define PM_BKUPCFG_BRAMCFG_Pos _U_(0) /**< (PM_BKUPCFG) Ram Configuration Position */
|
|
#define PM_BKUPCFG_BRAMCFG_Msk (_U_(0x3) << PM_BKUPCFG_BRAMCFG_Pos) /**< (PM_BKUPCFG) Ram Configuration Mask */
|
|
#define PM_BKUPCFG_BRAMCFG(value) (PM_BKUPCFG_BRAMCFG_Msk & ((value) << PM_BKUPCFG_BRAMCFG_Pos))
|
|
#define PM_BKUPCFG_BRAMCFG_RET_Val _U_(0x0) /**< (PM_BKUPCFG) All the backup RAM is retained */
|
|
#define PM_BKUPCFG_BRAMCFG_PARTIAL_Val _U_(0x1) /**< (PM_BKUPCFG) Only the first 4Kbytes of the backup RAM is retained */
|
|
#define PM_BKUPCFG_BRAMCFG_OFF_Val _U_(0x2) /**< (PM_BKUPCFG) All the backup RAM is turned OFF */
|
|
#define PM_BKUPCFG_BRAMCFG_RET (PM_BKUPCFG_BRAMCFG_RET_Val << PM_BKUPCFG_BRAMCFG_Pos) /**< (PM_BKUPCFG) All the backup RAM is retained Position */
|
|
#define PM_BKUPCFG_BRAMCFG_PARTIAL (PM_BKUPCFG_BRAMCFG_PARTIAL_Val << PM_BKUPCFG_BRAMCFG_Pos) /**< (PM_BKUPCFG) Only the first 4Kbytes of the backup RAM is retained Position */
|
|
#define PM_BKUPCFG_BRAMCFG_OFF (PM_BKUPCFG_BRAMCFG_OFF_Val << PM_BKUPCFG_BRAMCFG_Pos) /**< (PM_BKUPCFG) All the backup RAM is turned OFF Position */
|
|
#define PM_BKUPCFG_Msk _U_(0x03) /**< (PM_BKUPCFG) Register Mask */
|
|
|
|
|
|
/* -------- PM_PWSAKDLY : (PM Offset: 0x12) (R/W 8) Power Switch Acknowledge Delay -------- */
|
|
#define PM_PWSAKDLY_RESETVALUE _U_(0x00) /**< (PM_PWSAKDLY) Power Switch Acknowledge Delay Reset Value */
|
|
|
|
#define PM_PWSAKDLY_DLYVAL_Pos _U_(0) /**< (PM_PWSAKDLY) Delay Value Position */
|
|
#define PM_PWSAKDLY_DLYVAL_Msk (_U_(0x7F) << PM_PWSAKDLY_DLYVAL_Pos) /**< (PM_PWSAKDLY) Delay Value Mask */
|
|
#define PM_PWSAKDLY_DLYVAL(value) (PM_PWSAKDLY_DLYVAL_Msk & ((value) << PM_PWSAKDLY_DLYVAL_Pos))
|
|
#define PM_PWSAKDLY_IGNACK_Pos _U_(7) /**< (PM_PWSAKDLY) Ignore Acknowledge Position */
|
|
#define PM_PWSAKDLY_IGNACK_Msk (_U_(0x1) << PM_PWSAKDLY_IGNACK_Pos) /**< (PM_PWSAKDLY) Ignore Acknowledge Mask */
|
|
#define PM_PWSAKDLY_IGNACK(value) (PM_PWSAKDLY_IGNACK_Msk & ((value) << PM_PWSAKDLY_IGNACK_Pos))
|
|
#define PM_PWSAKDLY_Msk _U_(0xFF) /**< (PM_PWSAKDLY) Register Mask */
|
|
|
|
|
|
/** \brief PM register offsets definitions */
|
|
#define PM_CTRLA_REG_OFST (0x00) /**< (PM_CTRLA) Control A Offset */
|
|
#define PM_SLEEPCFG_REG_OFST (0x01) /**< (PM_SLEEPCFG) Sleep Configuration Offset */
|
|
#define PM_INTENCLR_REG_OFST (0x04) /**< (PM_INTENCLR) Interrupt Enable Clear Offset */
|
|
#define PM_INTENSET_REG_OFST (0x05) /**< (PM_INTENSET) Interrupt Enable Set Offset */
|
|
#define PM_INTFLAG_REG_OFST (0x06) /**< (PM_INTFLAG) Interrupt Flag Status and Clear Offset */
|
|
#define PM_STDBYCFG_REG_OFST (0x08) /**< (PM_STDBYCFG) Standby Configuration Offset */
|
|
#define PM_HIBCFG_REG_OFST (0x09) /**< (PM_HIBCFG) Hibernate Configuration Offset */
|
|
#define PM_BKUPCFG_REG_OFST (0x0A) /**< (PM_BKUPCFG) Backup Configuration Offset */
|
|
#define PM_PWSAKDLY_REG_OFST (0x12) /**< (PM_PWSAKDLY) Power Switch Acknowledge Delay Offset */
|
|
|
|
#if !(defined(__ASSEMBLER__) || defined(__IAR_SYSTEMS_ASM__))
|
|
/** \brief PM register API structure */
|
|
typedef struct
|
|
{ /* Power Manager */
|
|
__IO uint8_t PM_CTRLA; /**< Offset: 0x00 (R/W 8) Control A */
|
|
__IO uint8_t PM_SLEEPCFG; /**< Offset: 0x01 (R/W 8) Sleep Configuration */
|
|
__I uint8_t Reserved1[0x02];
|
|
__IO uint8_t PM_INTENCLR; /**< Offset: 0x04 (R/W 8) Interrupt Enable Clear */
|
|
__IO uint8_t PM_INTENSET; /**< Offset: 0x05 (R/W 8) Interrupt Enable Set */
|
|
__IO uint8_t PM_INTFLAG; /**< Offset: 0x06 (R/W 8) Interrupt Flag Status and Clear */
|
|
__I uint8_t Reserved2[0x01];
|
|
__IO uint8_t PM_STDBYCFG; /**< Offset: 0x08 (R/W 8) Standby Configuration */
|
|
__IO uint8_t PM_HIBCFG; /**< Offset: 0x09 (R/W 8) Hibernate Configuration */
|
|
__IO uint8_t PM_BKUPCFG; /**< Offset: 0x0A (R/W 8) Backup Configuration */
|
|
__I uint8_t Reserved3[0x07];
|
|
__IO uint8_t PM_PWSAKDLY; /**< Offset: 0x12 (R/W 8) Power Switch Acknowledge Delay */
|
|
} pm_registers_t;
|
|
|
|
|
|
#endif /* !(defined(__ASSEMBLER__) || defined(__IAR_SYSTEMS_ASM__)) */
|
|
#endif /* _SAME54_PM_COMPONENT_H_ */
|