4.65 swscanf, fwscanf, wscanf—scan and format wide character input

Synopsis

#include <stdio.h>

int wscanf(const wchar_t *__restrict format, ...);
int fwscanf(FILE *__restrict fd,
    const wchar_t *__restrict format, ...);
int swscanf(const wchar_t *__restrict str, 
    const wchar_t *__restrict format, ...);

int _wscanf_r(struct _reent *ptr, const wchar_t *format, ...);
int _fwscanf_r(struct _reent *ptr, FILE *fd, 
    const wchar_t *format, ...);
int _swscanf_r(struct _reent *ptr, const wchar_t *str,
    const wchar_t *format, ...);

Description
wscanf scans a series of input fields from standard input, one wide character at a time. Each field is interpreted according to a format specifier passed to wscanf in the format string at *format. wscanf stores the interpreted input from each field at the address passed to it as the corresponding argument following format. You must supply the same number of format specifiers and address arguments as there are input fields.

There must be sufficient address arguments for the given format specifiers; if not the results are unpredictable and likely disasterous. Excess address arguments are merely ignored.

wscanf often produces unexpected results if the input diverges from an expected pattern. Since the combination of gets or fgets followed by swscanf is safe and easy, that is the preferred way to be certain that a program is synchronized with input at the end of a line.

fwscanf and swscanf are identical to wscanf, other than the source of input: fwscanf reads from a file, and swscanf from a string.

The routines _wscanf_r, _fwscanf_r, and _swscanf_r are reentrant versions of wscanf, fwscanf, and swscanf that take an additional first argument pointing to a reentrancy structure.

The string at *format is a wide character sequence composed of zero or more directives. Directives are composed of one or more whitespace characters, non-whitespace characters, and format specifications.

Whitespace characters are blank ( ), tab (\t), or newline (\n). When wscanf encounters a whitespace character in the format string it will read (but not store) all consecutive whitespace characters up to the next non-whitespace character in the input.

Non-whitespace characters are all other ASCII characters except the percent sign (%). When wscanf encounters a non-whitespace character in the format string it will read, but not store a matching non-whitespace character.

Format specifications tell wscanf to read and convert characters from the input field into specific types of values, and store then in the locations specified by the address arguments.

Trailing whitespace is left unread unless explicitly matched in the format string.

The format specifiers must begin with a percent sign (%) and have the following form:

       %[*][width][size]type

Each format specification begins with the percent character (%). The other fields are:

• *

  an optional marker; if present, it suppresses interpretation and assignment of this input field.

• width

  an optional maximum field width: a decimal integer, which controls the maximum number of characters that will be read before converting the current input field. If the input field has fewer than width characters, wscanf reads all the characters in the field, and then proceeds with the next field and its format specification.

  If a whitespace or a non-convertable wide character occurs before width character are read, the characters up to that character are read, converted, and stored. Then wscanf proceeds to the next format specification.

• size

  h, j, l, L, t, and z are optional size characters which override the default way that wscanf interprets the data type of the corresponding argument.

  Modifier	Type(s)
  hh	d, i, o, u, x, n	convert input to char, store in char object
  h	d, i, o, u, x, n	convert input to short, store in short object
  h	e, f, c, s, p	no effect
  j	d, i, o, u, x, n	convert input to intmax_t, store in intmax_t object
  j	all others	no effect
  l	d, i, o, u, x, n	convert input to long, store in long object
  l	e, f, g	convert input to double, store in a double object
  l	c, s, [	the input is stored in a wchar_t object
  l	p	no effect
  ll	d, i, o, u, x, n	convert to long long, store in long long object
  L	d, i, o, u, x, n	convert to long long, store in long long object
  L	e, f, g, E, G	convert to long double, store in long double object
  L	all others	no effect
  t	d, i, o, u, x, n	convert input to ptrdiff_t, store in ptrdiff_t object
  t	all others	no effect
  z	d, i, o, u, x, n	convert input to size_t, store in size_t object
  z	all others	no effect

• type

  A character to specify what kind of conversion wscanf performs. Here is a table of the conversion characters:

  %

  No conversion is done; the percent character (%) is stored.

  c

  Scans one wide character. Corresponding arg: (char *arg). Otherwise, if an l specifier is present, the corresponding arg is a (wchar_t *arg).

  s

  Reads a character string into the array supplied. Corresponding arg: (char arg[]). If an l specifier is present, the corresponding arg is a (wchar_t *arg).

  [pattern]

  Reads a non-empty character string into memory starting at arg. This area must be large enough to accept the sequence and a terminating null character which will be added automatically. (pattern is discussed in the paragraph following this table). Corresponding arg: (char *arg). If an l specifier is present, the corresponding arg is a (wchar_t *arg).

  d

  Reads a decimal integer into the corresponding arg: (int *arg).

  o

  Reads an octal integer into the corresponding arg: (int *arg).

  u

  Reads an unsigned decimal integer into the corresponding arg: (unsigned int *arg).

  x,X

  Read a hexadecimal integer into the corresponding arg: (int *arg).

  e, f, g

  Read a floating-point number into the corresponding arg: (float *arg).

  E, F, G

  Read a floating-point number into the corresponding arg: (double *arg).

  i

  Reads a decimal, octal or hexadecimal integer into the corresponding arg: (int *arg).

  n

  Stores the number of characters read in the corresponding arg: (int *arg).

  p

  Stores a scanned pointer. ANSI C leaves the details to each implementation; this implementation treats %p exactly the same as %U. Corresponding arg: (void **arg).

  A pattern of characters surrounded by square brackets can be used instead of the s type character. pattern is a set of characters which define a search set of possible characters making up the wscanf input field. If the first character in the brackets is a caret (^), the search set is inverted to include all ASCII characters except those between the brackets. There is no range facility as is defined in the corresponding non-wide character scanf functions. Ranges are not part of the POSIX standard.

  Here are some pattern examples:

  %[abcd]

  matches wide character strings containing only a, b, c, and d.

  %[^abcd]

  matches wide character strings containing any characters except a, b, c, or d.

  %[A-DW-Z]

  Note: No wide character ranges, so this expression matches wide character strings containing A, -, D, W, Z.

  Floating point numbers (for field types e, f, g, E, F, G) must correspond to the following general form:

  		[+/-] ddddd[.]ddd [E|e[+|-]ddd]
  

  where objects inclosed in square brackets are optional, and ddd represents decimal, octal, or hexadecimal digits.

Returns
wscanf returns the number of input fields successfully scanned, converted and stored; the return value does not include scanned fields which were not stored.

If wscanf attempts to read at end-of-file, the return value is EOF.

If no fields were stored, the return value is 0.

wscanf might stop scanning a particular field before reaching the normal field end character, or may terminate entirely.

wscanf stops scanning and storing the current field and moves to the next input field (if any) in any of the following situations:

• The assignment suppressing character (*) appears after the % in the format specification; the current input field is scanned but not stored.
• width characters have been read (width is a width specification, a positive decimal integer).
• The next wide character read cannot be converted under the the current format (for example, if a Z is read when the format is decimal).
• The next wide character in the input field does not appear in the search set (or does appear in the inverted search set).

When wscanf stops scanning the current input field for one of these reasons, the next character is considered unread and used as the first character of the following input field, or the first character in a subsequent read operation on the input.

wscanf will terminate under the following circumstances:

• The next wide character in the input field conflicts with a corresponding non-whitespace character in the format string.
• The next wide character in the input field is WEOF.
• The format string has been exhausted.

When the format string contains a wide character sequence that is not part of a format specification, the same wide character sequence must appear in the input; wscanf will scan but not store the matched characters. If a conflict occurs, the first conflicting wide character remains in the input as if it had never been read.

Portability
wscanf is C99, POSIX-1.2008.

Supporting OS subroutines required: close, fstat, isatty, lseek, read, sbrk, write.