4.64 swprintf, fwprintf, wprintf—wide character format output

Synopsis

#include <wchar.h>

int wprintf(const wchar_t *format, ...);
int fwprintf(FILE *__restrict fd,
    const wchar_t *__restrict format, ...);
int swprintf(wchar_t *__restrict str, size_t size,
    const wchar_t *__restrict format, ...);

int _wprintf_r(struct _reent *ptr, const wchar_t *format, ...);
int _fwprintf_r(struct _reent *ptr, FILE *fd,
    const wchar_t *format, ...);
int _swprintf_r(struct _reent *ptr, wchar_t *str,
    size_t size, const wchar_t *format, ...);

Description
wprintf accepts a series of arguments, applies to each a format specifier from *format, and writes the formatted data to stdout, without a terminating NUL wide character. The behavior of wprintf is undefined if there are not enough arguments for the format or if any argument is not the right type for the corresponding conversion specifier. wprintf returns when it reaches the end of the format string. If there are more arguments than the format requires, excess arguments are ignored.

fwprintf is like wprintf, except that output is directed to the stream fd rather than stdout.

swprintf is like wprintf, except that output is directed to the buffer str with a terminating wide NUL, and the resulting string length is limited to at most size wide characters, including the terminating NUL. It is considered an error if the output (including the terminating wide-NULL) does not fit into size wide characters. (This error behavior is not the same as for snprintf, which swprintf is otherwise completely analogous to. While snprintf allows the needed size to be known simply by giving size=0, swprintf does not, giving an error instead.)

For swprintf the behavior is undefined if the output *str overlaps with one of the arguments. Behavior is also undefined if the argument for %n within *format overlaps another argument.

format is a pointer to a wide character string containing two types of objects: ordinary characters (other than %), which are copied unchanged to the output, and conversion specifications, each of which is introduced by %. (To include % in the output, use %% in the format string.) A conversion specification has the following form:

       %[pos][flags][width][.prec][size]type

The fields of the conversion specification have the following meanings:

• pos

  Conversions normally consume arguments in the order that they are presented. However, it is possible to consume arguments out of order, and reuse an argument for more than one conversion specification (although the behavior is undefined if the same argument is requested with different types), by specifying pos, which is a decimal integer followed by ’$’. The integer must be between 1 and <NL_ARGMAX> from limits.h, and if argument %n$ is requested, all earlier arguments must be requested somewhere within format. If positional parameters are used, then all conversion specifications except for %% must specify a position. This positional parameters method is a POSIX extension to the C standard definition for the functions.

• flags

  flags is an optional sequence of characters which control output justification, numeric signs, decimal points, trailing zeros, and octal and hex prefixes. The flag characters are minus (-), plus (+), space ( ), zero (0), sharp (#), and quote ('). They can appear in any combination, although not all flags can be used for all conversion specification types.

  '

  A POSIX extension to the C standard. However, this implementation presently treats it as a no-op, which is the default behavior for the C locale, anyway. (If it did what it is supposed to, when type were i, d, u, f, F, g, or G, the integer portion of the conversion would be formatted with thousands’ grouping wide characters.)

  -

  The result of the conversion is left justified, and the right is padded with blanks. If you do not use this flag, the result is right justified, and padded on the left.

  +

  The result of a signed conversion (as determined by type of d, i, a, A, e, E, f, F, g, or G) will always begin with a plus or minus sign. (If you do not use this flag, positive values do not begin with a plus sign.)

  " " (space)

  If the first character of a signed conversion specification is not a sign, or if a signed conversion results in no characters, the result will begin with a space. If the space ( ) flag and the plus (+) flag both appear, the space flag is ignored.

  0

  If the type character is d, i, o, u, x, X, a, A, e, E, f, F, g, or G: leading zeros are used to pad the field width (following any indication of sign or base); no spaces are used for padding. If the zero (0) and minus (-) flags both appear, the zero (0) flag will be ignored. For d, i, o, u, x, and X conversions, if a precision prec is specified, the zero (0) flag is ignored.

  Note that 0 is interpreted as a flag, not as the beginning of a field width.

  #

  The result is to be converted to an alternative form, according to the type character.

  The alternative form output with the # flag depends on the type character:

  o

  Increases precision to force the first digit of the result to be a zero.

  x

  A non-zero result will have a 0x prefix.

  X

  A non-zero result will have a 0X prefix.

  a, A, e, E, f, or F

  The result will always contain a decimal point even if no digits follow the point. (Normally, a decimal point appears only if a digit follows it.) Trailing zeros are removed.

  g or G

  The result will always contain a decimal point even if no digits follow the point. Trailing zeros are not removed.

  all others

  Undefined.

• width

  width is an optional minimum field width. You can either specify it directly as a decimal integer, or indirectly by using instead an asterisk (*), in which case an int argument is used as the field width. If positional arguments are used, then the width must also be specified positionally as *m$, with m as a decimal integer. Negative field widths are treated as specifying the minus (-) flag for left justfication, along with a positive field width. The resulting format may be wider than the specified width.

• prec

  prec is an optional field; if present, it is introduced with ‘.’ (a period). You can specify the precision either directly as a decimal integer or indirectly by using an asterisk (*), in which case an int argument is used as the precision. If positional arguments are used, then the precision must also be specified positionally as *m$, with m as a decimal integer. Supplying a negative precision is equivalent to omitting the precision. If only a period is specified the precision is zero. The effect depends on the conversion type.

  d, i, o, u, x, or X

  Minimum number of digits to appear. If no precision is given, defaults to 1.

  a or A

  Number of digits to appear after the decimal point. If no precision is given, the precision defaults to the minimum needed for an exact representation.

  e, E, f or F

  Number of digits to appear after the decimal point. If no precision is given, the precision defaults to 6.

  g or G

  Maximum number of significant digits. A precision of 0 is treated the same as a precision of 1. If no precision is given, the precision defaults to 6.

  s or S

  Maximum number of characters to print from the string. If no precision is given, the entire string is printed.

  all others

  undefined.

• size

  size is an optional modifier that changes the data type that the corresponding argument has. Behavior is unspecified if a size is given that does not match the type.

  hh

  With d, i, o, u, x, or X, specifies that the argument should be converted to a signed char or unsigned char before printing.

  With n, specifies that the argument is a pointer to a signed char.

  h

  With d, i, o, u, x, or X, specifies that the argument should be converted to a short or unsigned short before printing.

  With n, specifies that the argument is a pointer to a short.

  l

  With d, i, o, u, x, or X, specifies that the argument is a long or unsigned long.

  With c, specifies that the argument has type wint_t.

  With s, specifies that the argument is a pointer to wchar_t.

  With n, specifies that the argument is a pointer to a long.

  With a, A, e, E, f, F, g, or G, has no effect (because of vararg promotion rules, there is no need to distinguish between float and double).

  ll

  With d, i, o, u, x, or X, specifies that the argument is a long long or unsigned long long.

  With n, specifies that the argument is a pointer to a long long.

  j

  With d, i, o, u, x, or X, specifies that the argument is an intmax_t or uintmax_t.

  With n, specifies that the argument is a pointer to an intmax_t.

  z

  With d, i, o, u, x, or X, specifies that the argument is a size_t.

  With n, specifies that the argument is a pointer to a size_t.

  t

  With d, i, o, u, x, or X, specifies that the argument is a ptrdiff_t.

  With n, specifies that the argument is a pointer to a ptrdiff_t.

  L

  With a, A, e, E, f, F, g, or G, specifies that the argument is a long double.

• type

  type specifies what kind of conversion wprintf performs. Here is a table of these:

  %

  Prints the percent character (%).

  c

  If no l qualifier is present, the int argument shall be converted to a wide character as if by calling the btowc() function and the resulting wide character shall be written. Otherwise, the wint_t argument shall be converted to wchar_t, and written.

  C

  Short for %lc. A POSIX extension to the C standard.

  s

  If no l qualifier is present, the application shall ensure that the argument is a pointer to a character array containing a character sequence beginning in the initial shift state. Characters from the array shall be converted as if by repeated calls to the mbrtowc() function, with the conversion state described by an mbstate_t object initialized to zero before the first character is converted, and written up to (but not including) the terminating null wide character. If the precision is specified, no more than that many wide characters shall be written. If the precision is not specified, or is greater than the size of the array, the application shall ensure that the array contains a null wide character.

  If an l qualifier is present, the application shall ensure that the argument is a pointer to an array of type wchar_t. Wide characters from the array shall be written up to (but not including) a terminating null wide character. If no precision is specified, or is greater than the size of the array, the application shall ensure that the array contains a null wide character. If a precision is specified, no more than that many wide characters shall be written.

  S

  Short for %ls. A POSIX extension to the C standard.

  d or i

  Prints a signed decimal integer; takes an int. Leading zeros are inserted as necessary to reach the precision. A value of 0 with a precision of 0 produces an empty string.

  o

  Prints an unsigned octal integer; takes an unsigned. Leading zeros are inserted as necessary to reach the precision. A value of 0 with a precision of 0 produces an empty string.

  u

  Prints an unsigned decimal integer; takes an unsigned. Leading zeros are inserted as necessary to reach the precision. A value of 0 with a precision of 0 produces an empty string.

  x

  Prints an unsigned hexadecimal integer (using abcdef as digits beyond 9); takes an unsigned. Leading zeros are inserted as necessary to reach the precision. A value of 0 with a precision of 0 produces an empty string.

  X

  Like x, but uses ABCDEF as digits beyond 9.

  f

  Prints a signed value of the form [-]9999.9999, with the precision determining how many digits follow the decimal point; takes a double (remember that float promotes to double as a vararg). The low order digit is rounded to even. If the precision results in at most DECIMAL_DIG digits, the result is rounded correctly; if more than DECIMAL_DIG digits are printed, the result is only guaranteed to round back to the original value.

  If the value is infinite, the result is inf, and no zero padding is performed. If the value is not a number, the result is nan, and no zero padding is performed.

  F

  Like f, but uses INF and NAN for non-finite numbers.

  e

  Prints a signed value of the form [-]9.9999e[+|-]999; takes a double. The digit before the decimal point is non-zero if the value is non-zero. The precision determines how many digits appear between . and e, and the exponent always contains at least two digits. The value zero has an exponent of zero. If the value is not finite, it is printed like f.

  E

  Like e, but using E to introduce the exponent, and like F for non-finite values.

  g

  Prints a signed value in either f or e form, based on the given value and precision—an exponent less than -4 or greater than the precision selects the e form. Trailing zeros and the decimal point are printed only if necessary; takes a double.

  G

  Like g, except use F or E form.

  a

  Prints a signed value of the form [-]0x1.ffffp[+|-]9; takes a double. The letters abcdef are used for digits beyond 9. The precision determines how many digits appear after the decimal point. The exponent contains at least one digit, and is a decimal value representing the power of 2; a value of 0 has an exponent of 0. Non-finite values are printed like f.

  A

  Like a, except uses X, P, and ABCDEF instead of lower case.

  n

  Takes a pointer to int, and stores a count of the number of bytes written so far. No output is created.

  p

  Takes a pointer to void, and prints it in an implementation-defined format. This implementation is similar to %#tx), except that 0x appears even for the NULL pointer.

  m

  Prints the output of strerror(errno); no argument is required. A GNU extension.

_wprintf_r, _fwprintf_r, _swprintf_r, are simply reentrant versions of the functions above.

Returns
On success, swprintf return the number of wide characters in the output string, except the concluding NUL is not counted. wprintf and fwprintf return the number of characters transmitted.

If an error occurs, the result of wprintf, fwprintf, and swprintf is a negative value. For wprintf and fwprintf, errno may be set according to fputwc. For swprintf, errno may be set to EOVERFLOW if size is greater than INT_MAX / sizeof (wchar_t), or when the output does not fit into size wide characters (including the terminating wide NULL).

Bugs
The “”’ (quote) flag does not work when locale’s thousands_sep is not empty.

Portability
POSIX-1.2008 with extensions; C99 (compliant except for POSIX extensions).

Depending on how newlib was configured, not all format specifiers are supported.

Supporting OS subroutines required: close, fstat, isatty, lseek, read, sbrk, write.