/** * @file SSD1963.h * * Source: https://github.com/lvgl/lv_drivers/tree/master/display */ #ifndef SSD1963_H #define SSD1963_H #include "oracle.h" #ifdef __cplusplus extern "C" { #endif /*---------------- * SSD1963 *--------------*/ #ifndef USE_SSD1963 # define USE_SSD1963 1 #endif #if USE_SSD1963 # define SSD1963_HOR_RES LV_HOR_RES # define SSD1963_VER_RES LV_VER_RES # define SSD1963_HT 525 // horizontal total period # define SSD1963_HPS 480 // non-display period between the start of the hori sync (LLINE) signal # define SSD1963_LPS 40 // horizontal sync pulse (LLINE) start location # define SSD1963_HPW 5 // horizontal pulse width # define SSD1963_VT 288 // vertical total (period) # define SSD1963_VPS 272 // vertical period start ( non-display period in lines between the start of the frame and the first display data in line.) # define SSD1963_FPS 8 // vertical sync pulse (LFRAME) start location in lines # define SSD1963_VPW 8 // vertical sync pulse width # define SSD1963_HS_NEG 0 /*Negative hsync*/ # define SSD1963_VS_NEG 0 /*Negative vsync*/ # define SSD1963_ORI 0 /*0, 90, 180, 270*/ # define SSD1963_COLOR_DEPTH 16 #endif #if USE_SSD1963 #ifdef LV_LVGL_H_INCLUDE_SIMPLE #include "lvgl.h" #else #include "lvgl/lvgl.h" #endif /********************* * DEFINES *********************/ // SSD1963 command table #define CMD_NOP 0x00 //No operation #define CMD_SOFT_RESET 0x01 //Software reset #define CMD_GET_PWR_MODE 0x0A //Get the current power mode #define CMD_GET_ADDR_MODE 0x0B //Get the frame memory to the display panel read order #define CMD_GET_PIXEL_FORMAT 0x0C //Get the current pixel format #define CMD_GET_DISPLAY_MODE 0x0D //Returns the display mode #define CMD_GET_SIGNAL_MODE 0x0E // #define CMD_GET_DIAGNOSTIC 0x0F #define CMD_ENT_SLEEP 0x10 #define CMD_EXIT_SLEEP 0x11 #define CMD_ENT_PARTIAL_MODE 0x12 #define CMD_ENT_NORMAL_MODE 0x13 #define CMD_EXIT_INVERT_MODE 0x20 #define CMD_ENT_INVERT_MODE 0x21 #define CMD_SET_GAMMA 0x26 #define CMD_BLANK_DISPLAY 0x28 #define CMD_ON_DISPLAY 0x29 #define CMD_SET_COLUMN 0x2A #define CMD_SET_PAGE 0x2B #define CMD_WR_MEMSTART 0x2C #define CMD_RD_MEMSTART 0x2E #define CMD_SET_PARTIAL_AREA 0x30 #define CMD_SET_SCROLL_AREA 0x33 #define CMD_SET_TEAR_OFF 0x34 //synchronization information is not sent from the display #define CMD_SET_TEAR_ON 0x35 //sync. information is sent from the display #define CMD_SET_ADDR_MODE 0x36 //set fram buffer read order to the display panel #define CMD_SET_SCROLL_START 0x37 #define CMD_EXIT_IDLE_MODE 0x38 #define CMD_ENT_IDLE_MODE 0x39 #define CMD_SET_PIXEL_FORMAT 0x3A //defines how many bits per pixel is used #define CMD_WR_MEM_AUTO 0x3C #define CMD_RD_MEM_AUTO 0x3E #define CMD_SET_TEAR_SCANLINE 0x44 #define CMD_GET_SCANLINE 0x45 #define CMD_RD_DDB_START 0xA1 #define CMD_RD_DDB_AUTO 0xA8 #define CMD_SET_PANEL_MODE 0xB0 #define CMD_GET_PANEL_MODE 0xB1 #define CMD_SET_HOR_PERIOD 0xB4 #define CMD_GET_HOR_PERIOD 0xB5 #define CMD_SET_VER_PERIOD 0xB6 #define CMD_GET_VER_PERIOD 0xB7 #define CMD_SET_GPIO_CONF 0xB8 #define CMD_GET_GPIO_CONF 0xB9 #define CMD_SET_GPIO_VAL 0xBA #define CMD_GET_GPIO_STATUS 0xBB #define CMD_SET_POST_PROC 0xBC #define CMD_GET_POST_PROC 0xBD #define CMD_SET_PWM_CONF 0xBE #define CMD_GET_PWM_CONF 0xBF #define CMD_SET_LCD_GEN0 0xC0 #define CMD_GET_LCD_GEN0 0xC1 #define CMD_SET_LCD_GEN1 0xC2 #define CMD_GET_LCD_GEN1 0xC3 #define CMD_SET_LCD_GEN2 0xC4 #define CMD_GET_LCD_GEN2 0xC5 #define CMD_SET_LCD_GEN3 0xC6 #define CMD_GET_LCD_GEN3 0xC7 #define CMD_SET_GPIO0_ROP 0xC8 #define CMD_GET_GPIO0_ROP 0xC9 #define CMD_SET_GPIO1_ROP 0xCA #define CMD_GET_GPIO1_ROP 0xCB #define CMD_SET_GPIO2_ROP 0xCC #define CMD_GET_GPIO2_ROP 0xCD #define CMD_SET_GPIO3_ROP 0xCE #define CMD_GET_GPIO3_ROP 0xCF #define CMD_SET_ABC_DBC_CONF 0xD0 #define CMD_GET_ABC_DBC_CONF 0xD1 #define CMD_SET_DBC_HISTO_PTR 0xD2 #define CMD_GET_DBC_HISTO_PTR 0xD3 #define CMD_SET_DBC_THRES 0xD4 #define CMD_GET_DBC_THRES 0xD5 #define CMD_SET_ABM_TMR 0xD6 #define CMD_GET_ABM_TMR 0xD7 #define CMD_SET_AMB_LVL0 0xD8 #define CMD_GET_AMB_LVL0 0xD9 #define CMD_SET_AMB_LVL1 0xDA #define CMD_GET_AMB_LVL1 0xDB #define CMD_SET_AMB_LVL2 0xDC #define CMD_GET_AMB_LVL2 0xDD #define CMD_SET_AMB_LVL3 0xDE #define CMD_GET_AMB_LVL3 0xDF #define CMD_PLL_START 0xE0 //start the PLL #define CMD_PLL_STOP 0xE1 //disable the PLL #define CMD_SET_PLL_MN 0xE2 #define CMD_GET_PLL_MN 0xE3 #define CMD_GET_PLL_STATUS 0xE4 //get the current PLL status #define CMD_ENT_DEEP_SLEEP 0xE5 #define CMD_SET_PCLK 0xE6 //set pixel clock (LSHIFT signal) frequency #define CMD_GET_PCLK 0xE7 //get pixel clock (LSHIFT signal) freq. settings #define CMD_SET_DATA_INTERFACE 0xF0 #define CMD_GET_DATA_INTERFACE 0xF1 /********************** * TYPEDEFS **********************/ /********************** * GLOBAL PROTOTYPES **********************/ void ssd1963_init(void); void ssd1963_flush(lv_disp_drv_t * disp_drv, const lv_area_t * area, lv_color_t * color_p); /********************** * MACROS **********************/ #endif /* USE_SSD1963 */ #ifdef __cplusplus } extern "C" #endif #endif /* SSD1963_H */