/**
 * @file SSD1963.h
 *
 * Source: https://github.com/lvgl/lv_drivers/tree/master/display
 */

#ifndef SSD1963_H
#define SSD1963_H

#ifdef __cplusplus
extern "C" {
#endif

/*----------------
 *    SSD1963
 *--------------*/
#ifndef USE_SSD1963
#  define USE_SSD1963         1
#endif

#if USE_SSD1963
#  define SSD1963_HOR_RES     LV_HOR_RES
#  define SSD1963_VER_RES     LV_VER_RES
#  define SSD1963_HT          525			// horizontal total period
#  define SSD1963_HPS         480			// non-display period between the start of the hori sync (LLINE) signal
#  define SSD1963_LPS         40				// horizontal sync pulse (LLINE) start location
#  define SSD1963_HPW         5			// horizontal pulse width
#  define SSD1963_VT          272			// vertical total (period)
#  define SSD1963_VPS         272			// vertical period start ( non-display period in lines between the start of the frame and the first display data in line.)
#  define SSD1963_FPS         2				// vertical sync pulse (LFRAME) start location in lines
#  define SSD1963_VPW         10			// vertical sync pulse width
#  define SSD1963_HS_NEG      0   /*Negative hsync*/
#  define SSD1963_VS_NEG      0   /*Negative vsync*/
#  define SSD1963_ORI         0   /*0, 90, 180, 270*/
#  define SSD1963_COLOR_DEPTH 16
#endif

#if USE_SSD1963

#ifdef LV_LVGL_H_INCLUDE_SIMPLE
#include "lvgl.h"
#else
#include "lvgl/lvgl.h"
#endif

#include "oracle.h"

/*********************
 *      DEFINES
 *********************/
// SSD1963 command table
#define CMD_NOP                 0x00    //No operation
#define CMD_SOFT_RESET          0x01    //Software reset
#define CMD_GET_PWR_MODE        0x0A    //Get the current power mode
#define CMD_GET_ADDR_MODE       0x0B    //Get the frame memory to the display panel read order
#define CMD_GET_PIXEL_FORMAT    0x0C    //Get the current pixel format
#define CMD_GET_DISPLAY_MODE    0x0D    //Returns the display mode
#define CMD_GET_SIGNAL_MODE     0x0E    //
#define CMD_GET_DIAGNOSTIC      0x0F
#define CMD_ENT_SLEEP           0x10
#define CMD_EXIT_SLEEP          0x11
#define CMD_ENT_PARTIAL_MODE    0x12
#define CMD_ENT_NORMAL_MODE     0x13
#define CMD_EXIT_INVERT_MODE    0x20
#define CMD_ENT_INVERT_MODE     0x21
#define CMD_SET_GAMMA           0x26
#define CMD_BLANK_DISPLAY       0x28
#define CMD_ON_DISPLAY          0x29
#define CMD_SET_COLUMN          0x2A
#define CMD_SET_PAGE            0x2B
#define CMD_WR_MEMSTART         0x2C
#define CMD_RD_MEMSTART         0x2E
#define CMD_SET_PARTIAL_AREA    0x30
#define CMD_SET_SCROLL_AREA     0x33
#define CMD_SET_TEAR_OFF        0x34    //synchronization information is not sent from the display
#define CMD_SET_TEAR_ON         0x35    //sync. information is sent from the display
#define CMD_SET_ADDR_MODE       0x36    //set fram buffer read order to the display panel
#define CMD_SET_SCROLL_START    0x37
#define CMD_EXIT_IDLE_MODE      0x38
#define CMD_ENT_IDLE_MODE       0x39
#define CMD_SET_PIXEL_FORMAT    0x3A    //defines how many bits per pixel is used
#define CMD_WR_MEM_AUTO         0x3C
#define CMD_RD_MEM_AUTO         0x3E
#define CMD_SET_TEAR_SCANLINE   0x44
#define CMD_GET_SCANLINE        0x45
#define CMD_RD_DDB_START        0xA1
#define CMD_RD_DDB_AUTO         0xA8
#define CMD_SET_PANEL_MODE      0xB0
#define CMD_GET_PANEL_MODE      0xB1
#define CMD_SET_HOR_PERIOD      0xB4
#define CMD_GET_HOR_PERIOD      0xB5
#define CMD_SET_VER_PERIOD      0xB6
#define CMD_GET_VER_PERIOD      0xB7
#define CMD_SET_GPIO_CONF       0xB8
#define CMD_GET_GPIO_CONF       0xB9
#define CMD_SET_GPIO_VAL        0xBA
#define CMD_GET_GPIO_STATUS     0xBB
#define CMD_SET_POST_PROC       0xBC
#define CMD_GET_POST_PROC       0xBD
#define CMD_SET_PWM_CONF        0xBE
#define CMD_GET_PWM_CONF        0xBF
#define CMD_SET_LCD_GEN0        0xC0
#define CMD_GET_LCD_GEN0        0xC1
#define CMD_SET_LCD_GEN1        0xC2
#define CMD_GET_LCD_GEN1        0xC3
#define CMD_SET_LCD_GEN2        0xC4
#define CMD_GET_LCD_GEN2        0xC5
#define CMD_SET_LCD_GEN3        0xC6
#define CMD_GET_LCD_GEN3        0xC7
#define CMD_SET_GPIO0_ROP       0xC8
#define CMD_GET_GPIO0_ROP       0xC9
#define CMD_SET_GPIO1_ROP       0xCA
#define CMD_GET_GPIO1_ROP       0xCB
#define CMD_SET_GPIO2_ROP       0xCC
#define CMD_GET_GPIO2_ROP       0xCD
#define CMD_SET_GPIO3_ROP       0xCE
#define CMD_GET_GPIO3_ROP       0xCF
#define CMD_SET_ABC_DBC_CONF    0xD0
#define CMD_GET_ABC_DBC_CONF    0xD1
#define CMD_SET_DBC_HISTO_PTR   0xD2
#define CMD_GET_DBC_HISTO_PTR   0xD3
#define CMD_SET_DBC_THRES       0xD4
#define CMD_GET_DBC_THRES       0xD5
#define CMD_SET_ABM_TMR         0xD6
#define CMD_GET_ABM_TMR         0xD7
#define CMD_SET_AMB_LVL0        0xD8
#define CMD_GET_AMB_LVL0        0xD9
#define CMD_SET_AMB_LVL1        0xDA
#define CMD_GET_AMB_LVL1        0xDB
#define CMD_SET_AMB_LVL2        0xDC
#define CMD_GET_AMB_LVL2        0xDD
#define CMD_SET_AMB_LVL3        0xDE
#define CMD_GET_AMB_LVL3        0xDF
#define CMD_PLL_START           0xE0    //start the PLL
#define CMD_PLL_STOP            0xE1    //disable the PLL
#define CMD_SET_PLL_MN          0xE2
#define CMD_GET_PLL_MN          0xE3
#define CMD_GET_PLL_STATUS      0xE4    //get the current PLL status
#define CMD_ENT_DEEP_SLEEP      0xE5
#define CMD_SET_PCLK            0xE6    //set pixel clock (LSHIFT signal) frequency
#define CMD_GET_PCLK            0xE7    //get pixel clock (LSHIFT signal) freq. settings
#define CMD_SET_DATA_INTERFACE  0xF0
#define CMD_GET_DATA_INTERFACE  0xF1


/**********************
 *      TYPEDEFS
 **********************/

/**********************
 * GLOBAL PROTOTYPES
 **********************/
void ssd1963_init(void);
void ssd1963_flush(lv_disp_drv_t * disp_drv, const lv_area_t * area, lv_color_t * color_p);

/**********************
 *      MACROS
 **********************/

#endif /* USE_SSD1963 */

#ifdef __cplusplus
} /* extern "C" */
#endif

#endif /* SSD1963_H */