Next: Gcov and Optimization, Previous: Gcov Intro, Up: Gcov [Contents][Index]
gcovgcov [options] files
gcov accepts the following options:
-a--all-blocksWrite individual execution counts for every basic block. Normally gcov outputs execution counts only for the main blocks of a line. With this option you can determine if blocks within a single line are not being executed.
-b--branch-probabilitiesWrite branch frequencies to the output file, and write branch summary info to the standard output. This option allows you to see how often each branch in your program was taken. Unconditional branches will not be shown, unless the -u option is given.
-c--branch-countsWrite branch frequencies as the number of branches taken, rather than the percentage of branches taken.
-d--display-progressDisplay the progress on the standard output.
-f--function-summariesOutput summaries for each function in addition to the file level summary.
-h--helpDisplay help about using gcov (on the standard output), and
exit without doing any further processing.
-i--intermediate-formatOutput gcov file in an easy-to-parse intermediate text format that can
be used by lcov or other tools. The output is a single
.gcov file per .gcda file. No source code is required.
The format of the intermediate .gcov file is plain text with one entry per line
version:gcc_version file:source_file_name function:start_line_number,end_line_number,execution_count,function_name lcount:line number,execution_count,has_unexecuted_block branch:line_number,branch_coverage_type Where the branch_coverage_type is notexec (Branch not executed) taken (Branch executed and taken) nottaken (Branch executed, but not taken)
There can be multiple file entries in an intermediate gcov file. All entries following a file pertain to that source file until the next file entry. If there are multiple functions that start on a single line, then corresponding lcount is repeated multiple times.
Here is a sample when -i is used in conjunction with -b option:
version: 8.1.0 20180103 file:tmp.cpp function:7,7,0,_ZN3FooIcEC2Ev function:7,7,1,_ZN3FooIiEC2Ev function:8,8,0,_ZN3FooIcE3incEv function:8,8,2,_ZN3FooIiE3incEv function:18,37,1,main lcount:7,0,1 lcount:7,1,0 lcount:8,0,1 lcount:8,2,0 lcount:18,1,0 lcount:21,1,0 branch:21,taken branch:21,nottaken lcount:23,1,0 branch:23,taken branch:23,nottaken lcount:24,1,0 branch:24,taken branch:24,nottaken lcount:25,1,0 lcount:27,11,0 branch:27,taken branch:27,taken lcount:28,10,0 lcount:30,1,1 branch:30,nottaken branch:30,taken lcount:32,1,0 branch:32,nottaken branch:32,taken lcount:33,0,1 branch:33,notexec branch:33,notexec lcount:35,1,0 branch:35,taken branch:35,nottaken lcount:36,1,0
-j--human-readableWrite counts in human readable format (like 24k).
-k--use-colorsUse colors for lines of code that have zero coverage. We use red color for non-exceptional lines and cyan for exceptional. Same colors are used for basic blocks with -a option.
-l--long-file-namesCreate long file names for included source files. For example, if the
header file x.h contains code, and was included in the file
a.c, then running gcov on the file a.c will
produce an output file called a.c##x.h.gcov instead of
x.h.gcov. This can be useful if x.h is included in
multiple source files and you want to see the individual
contributions. If you use the ‘-p’ option, both the including
and included file names will be complete path names.
-m--demangled-namesDisplay demangled function names in output. The default is to show mangled function names.
-n--no-outputDo not create the gcov output file.
-o directory|file--object-directory directory--object-file fileSpecify either the directory containing the gcov data files, or the object path name. The .gcno, and .gcda data files are searched for using this option. If a directory is specified, the data files are in that directory and named after the input file name, without its extension. If a file is specified here, the data files are named after that file, without its extension.
-p--preserve-pathsPreserve complete path information in the names of generated .gcov files. Without this option, just the filename component is used. With this option, all directories are used, with ‘/’ characters translated to ‘#’ characters, . directory components removed and unremoveable .. components renamed to ‘^’. This is useful if sourcefiles are in several different directories.
-r--relative-onlyOnly output information about source files with a relative pathname (after source prefix elision). Absolute paths are usually system header files and coverage of any inline functions therein is normally uninteresting.
-s directory--source-prefix directoryA prefix for source file names to remove when generating the output coverage files. This option is useful when building in a separate directory, and the pathname to the source directory is not wanted when determining the output file names. Note that this prefix detection is applied before determining whether the source file is absolute.
-u--unconditional-branchesWhen branch probabilities are given, include those of unconditional branches. Unconditional branches are normally not interesting.
-v--versionDisplay the gcov version number (on the standard output),
and exit without doing any further processing.
-w--verbosePrint verbose informations related to basic blocks and arcs.
-x--hash-filenamesBy default, gcov uses the full pathname of the source files to create an output filename. This can lead to long filenames that can overflow filesystem limits. This option creates names of the form source-file##md5.gcov, where the source-file component is the final filename part and the md5 component is calculated from the full mangled name that would have been used otherwise.
gcov should be run with the current directory the same as that
when you invoked the compiler. Otherwise it will not be able to locate
the source files. gcov produces files called
mangledname.gcov in the current directory. These contain
the coverage information of the source file they correspond to.
One .gcov file is produced for each source (or header) file
containing code,
which was compiled to produce the data files. The mangledname part
of the output file name is usually simply the source file name, but can
be something more complicated if the ‘-l’ or ‘-p’ options are
given. Refer to those options for details.
If you invoke gcov with multiple input files, the
contributions from each input file are summed. Typically you would
invoke it with the same list of files as the final link of your executable.
The .gcov files contain the ‘:’ separated fields along with program source code. The format is
execution_count:line_number:source line text
Additional block information may succeed each line, when requested by command line option. The execution_count is ‘-’ for lines containing no code. Unexecuted lines are marked ‘#####’ or ‘=====’, depending on whether they are reachable by non-exceptional paths or only exceptional paths such as C++ exception handlers, respectively. Given ‘-a’ option, unexecuted blocks are marked ‘$$$$$’ or ‘%%%%%’, depending on whether a basic block is reachable via non-exceptional or exceptional paths. Executed basic blocks having a statement with zero execution_count end with ‘*’ character and are colored with magenta color with -k option. The functionality is not supported in Ada.
Note that GCC can completely remove the bodies of functions that are not needed – for instance if they are inlined everywhere. Such functions are marked with ‘-’, which can be confusing. Use the -fkeep-inline-functions and -fkeep-static-functions options to retain these functions and allow gcov to properly show their execution_count.
Some lines of information at the start have line_number of zero. These preamble lines are of the form
-:0:tag:value
The ordering and number of these preamble lines will be augmented as
gcov development progresses — do not rely on them remaining
unchanged. Use tag to locate a particular preamble line.
The additional block information is of the form
tag information
The information is human readable, but designed to be simple enough for machine parsing too.
When printing percentages, 0% and 100% are only printed when the values are exactly 0% and 100% respectively. Other values which would conventionally be rounded to 0% or 100% are instead printed as the nearest non-boundary value.
When using gcov, you must first compile your program with two
special GCC options: ‘-fprofile-arcs -ftest-coverage’.
This tells the compiler to generate additional information needed by
gcov (basically a flow graph of the program) and also includes
additional code in the object files for generating the extra profiling
information needed by gcov. These additional files are placed in the
directory where the object file is located.
Running the program will cause profile output to be generated. For each source file compiled with -fprofile-arcs, an accompanying .gcda file will be placed in the object file directory.
Running gcov with your program’s source file names as arguments
will now produce a listing of the code along with frequency of execution
for each line. For example, if your program is called tmp.cpp, this
is what you see when you use the basic gcov facility:
$ g++ -fprofile-arcs -ftest-coverage tmp.cpp $ a.out $ gcov tmp.cpp -m File 'tmp.cpp' Lines executed:92.86% of 14 Creating 'tmp.cpp.gcov'
The file tmp.cpp.gcov contains output from gcov.
Here is a sample:
-: 0:Source:tmp.cpp
-: 0:Graph:tmp.gcno
-: 0:Data:tmp.gcda
-: 0:Runs:1
-: 0:Programs:1
-: 1:#include <stdio.h>
-: 2:
-: 3:template<class T>
-: 4:class Foo
-: 5:{
-: 6: public:
1*: 7: Foo(): b (1000) {}
------------------
Foo<char>::Foo():
#####: 7: Foo(): b (1000) {}
------------------
Foo<int>::Foo():
1: 7: Foo(): b (1000) {}
------------------
2*: 8: void inc () { b++; }
------------------
Foo<char>::inc():
#####: 8: void inc () { b++; }
------------------
Foo<int>::inc():
2: 8: void inc () { b++; }
------------------
-: 9:
-: 10: private:
-: 11: int b;
-: 12:};
-: 13:
-: 14:template class Foo<int>;
-: 15:template class Foo<char>;
-: 16:
-: 17:int
1: 18:main (void)
-: 19:{
-: 20: int i, total;
1: 21: Foo<int> counter;
-: 22:
1: 23: counter.inc();
1: 24: counter.inc();
1: 25: total = 0;
-: 26:
11: 27: for (i = 0; i < 10; i++)
10: 28: total += i;
-: 29:
1*: 30: int v = total > 100 ? 1 : 2;
-: 31:
1: 32: if (total != 45)
#####: 33: printf ("Failure\n");
-: 34: else
1: 35: printf ("Success\n");
1: 36: return 0;
-: 37:}
Note that line 7 is shown in the report multiple times. First occurrence presents total number of execution of the line and the next two belong to instances of class Foo constructors. As you can also see, line 30 contains some unexecuted basic blocks and thus execution count has asterisk symbol.
When you use the -a option, you will get individual block counts, and the output looks like this:
-: 0:Source:tmp.cpp
-: 0:Graph:tmp.gcno
-: 0:Data:tmp.gcda
-: 0:Runs:1
-: 0:Programs:1
-: 1:#include <stdio.h>
-: 2:
-: 3:template<class T>
-: 4:class Foo
-: 5:{
-: 6: public:
1*: 7: Foo(): b (1000) {}
------------------
Foo<char>::Foo():
#####: 7: Foo(): b (1000) {}
------------------
Foo<int>::Foo():
1: 7: Foo(): b (1000) {}
------------------
2*: 8: void inc () { b++; }
------------------
Foo<char>::inc():
#####: 8: void inc () { b++; }
------------------
Foo<int>::inc():
2: 8: void inc () { b++; }
------------------
-: 9:
-: 10: private:
-: 11: int b;
-: 12:};
-: 13:
-: 14:template class Foo<int>;
-: 15:template class Foo<char>;
-: 16:
-: 17:int
1: 18:main (void)
-: 19:{
-: 20: int i, total;
1: 21: Foo<int> counter;
1: 21-block 0
-: 22:
1: 23: counter.inc();
1: 23-block 0
1: 24: counter.inc();
1: 24-block 0
1: 25: total = 0;
-: 26:
11: 27: for (i = 0; i < 10; i++)
1: 27-block 0
11: 27-block 1
10: 28: total += i;
10: 28-block 0
-: 29:
1*: 30: int v = total > 100 ? 1 : 2;
1: 30-block 0
%%%%%: 30-block 1
1: 30-block 2
-: 31:
1: 32: if (total != 45)
1: 32-block 0
#####: 33: printf ("Failure\n");
%%%%%: 33-block 0
-: 34: else
1: 35: printf ("Success\n");
1: 35-block 0
1: 36: return 0;
1: 36-block 0
-: 37:}
In this mode, each basic block is only shown on one line – the last line of the block. A multi-line block will only contribute to the execution count of that last line, and other lines will not be shown to contain code, unless previous blocks end on those lines. The total execution count of a line is shown and subsequent lines show the execution counts for individual blocks that end on that line. After each block, the branch and call counts of the block will be shown, if the -b option is given.
Because of the way GCC instruments calls, a call count can be shown after a line with no individual blocks. As you can see, line 33 contains a basic block that was not executed.
When you use the -b option, your output looks like this:
-: 0:Source:tmp.cpp
-: 0:Graph:tmp.gcno
-: 0:Data:tmp.gcda
-: 0:Runs:1
-: 0:Programs:1
-: 1:#include <stdio.h>
-: 2:
-: 3:template<class T>
-: 4:class Foo
-: 5:{
-: 6: public:
1*: 7: Foo(): b (1000) {}
------------------
Foo<char>::Foo():
function Foo<char>::Foo() called 0 returned 0% blocks executed 0%
#####: 7: Foo(): b (1000) {}
------------------
Foo<int>::Foo():
function Foo<int>::Foo() called 1 returned 100% blocks executed 100%
1: 7: Foo(): b (1000) {}
------------------
2*: 8: void inc () { b++; }
------------------
Foo<char>::inc():
function Foo<char>::inc() called 0 returned 0% blocks executed 0%
#####: 8: void inc () { b++; }
------------------
Foo<int>::inc():
function Foo<int>::inc() called 2 returned 100% blocks executed 100%
2: 8: void inc () { b++; }
------------------
-: 9:
-: 10: private:
-: 11: int b;
-: 12:};
-: 13:
-: 14:template class Foo<int>;
-: 15:template class Foo<char>;
-: 16:
-: 17:int
function main called 1 returned 100% blocks executed 81%
1: 18:main (void)
-: 19:{
-: 20: int i, total;
1: 21: Foo<int> counter;
call 0 returned 100%
branch 1 taken 100% (fallthrough)
branch 2 taken 0% (throw)
-: 22:
1: 23: counter.inc();
call 0 returned 100%
branch 1 taken 100% (fallthrough)
branch 2 taken 0% (throw)
1: 24: counter.inc();
call 0 returned 100%
branch 1 taken 100% (fallthrough)
branch 2 taken 0% (throw)
1: 25: total = 0;
-: 26:
11: 27: for (i = 0; i < 10; i++)
branch 0 taken 91% (fallthrough)
branch 1 taken 9%
10: 28: total += i;
-: 29:
1*: 30: int v = total > 100 ? 1 : 2;
branch 0 taken 0% (fallthrough)
branch 1 taken 100%
-: 31:
1: 32: if (total != 45)
branch 0 taken 0% (fallthrough)
branch 1 taken 100%
#####: 33: printf ("Failure\n");
call 0 never executed
branch 1 never executed
branch 2 never executed
-: 34: else
1: 35: printf ("Success\n");
call 0 returned 100%
branch 1 taken 100% (fallthrough)
branch 2 taken 0% (throw)
1: 36: return 0;
-: 37:}
For each function, a line is printed showing how many times the function is called, how many times it returns and what percentage of the function’s blocks were executed.
For each basic block, a line is printed after the last line of the basic block describing the branch or call that ends the basic block. There can be multiple branches and calls listed for a single source line if there are multiple basic blocks that end on that line. In this case, the branches and calls are each given a number. There is no simple way to map these branches and calls back to source constructs. In general, though, the lowest numbered branch or call will correspond to the leftmost construct on the source line.
For a branch, if it was executed at least once, then a percentage indicating the number of times the branch was taken divided by the number of times the branch was executed will be printed. Otherwise, the message “never executed” is printed.
For a call, if it was executed at least once, then a percentage
indicating the number of times the call returned divided by the number
of times the call was executed will be printed. This will usually be
100%, but may be less for functions that call exit or longjmp,
and thus may not return every time they are called.
The execution counts are cumulative. If the example program were executed again without removing the .gcda file, the count for the number of times each line in the source was executed would be added to the results of the previous run(s). This is potentially useful in several ways. For example, it could be used to accumulate data over a number of program runs as part of a test verification suite, or to provide more accurate long-term information over a large number of program runs.
The data in the .gcda files is saved immediately before the program exits. For each source file compiled with -fprofile-arcs, the profiling code first attempts to read in an existing .gcda file; if the file doesn’t match the executable (differing number of basic block counts) it will ignore the contents of the file. It then adds in the new execution counts and finally writes the data to the file.
Next: Gcov and Optimization, Previous: Gcov Intro, Up: Gcov [Contents][Index]