/** ****************************************************************************** * @file stm32l4xx_hal_tim_ex.h * @author MCD Application Team * @brief Header file of TIM HAL Extended module. ****************************************************************************** * @attention * * Copyright (c) 2017 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32L4xx_HAL_TIM_EX_H #define STM32L4xx_HAL_TIM_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32l4xx_hal_def.h" /** @addtogroup STM32L4xx_HAL_Driver * @{ */ /** @addtogroup TIMEx * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup TIMEx_Exported_Types TIM Extended Exported Types * @{ */ /** * @brief TIM Hall sensor Configuration Structure definition */ typedef struct { uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. This parameter can be a value of @ref TIM_Input_Capture_Polarity */ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ uint32_t IC1Filter; /*!< Specifies the input capture filter. This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ } TIM_HallSensor_InitTypeDef; /** * @brief TIM Break/Break2 input configuration */ typedef struct { uint32_t Source; /*!< Specifies the source of the timer break input. This parameter can be a value of @ref TIMEx_Break_Input_Source */ uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ uint32_t Polarity; /*!< Specifies the break input source polarity. This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity Not relevant when analog watchdog output of the DFSDM1 used as break input source */ } TIMEx_BreakInputConfigTypeDef; /** * @} */ /* End of exported types -----------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants * @{ */ /** @defgroup TIMEx_Remap TIM Extended Remapping * @{ */ #define TIM_TIM1_ETR_ADC1_NONE 0x00000000U /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/ #define TIM_TIM1_ETR_ADC1_AWD1 TIM1_OR1_ETR_ADC1_RMP_0 /* !< TIM1_ETR is connected to ADC1 AWD1 */ #define TIM_TIM1_ETR_ADC1_AWD2 TIM1_OR1_ETR_ADC1_RMP_1 /* !< TIM1_ETR is connected to ADC1 AWD2 */ #define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_OR1_ETR_ADC1_RMP_1 | TIM1_OR1_ETR_ADC1_RMP_0) /* !< TIM1_ETR is connected to ADC1 AWD3 */ #if defined (ADC3) #define TIM_TIM1_ETR_ADC3_NONE 0x00000000U /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/ #define TIM_TIM1_ETR_ADC3_AWD1 TIM1_OR1_ETR_ADC3_RMP_0 /* !< TIM1_ETR is connected to ADC3 AWD1 */ #define TIM_TIM1_ETR_ADC3_AWD2 TIM1_OR1_ETR_ADC3_RMP_1 /* !< TIM1_ETR is connected to ADC3 AWD2 */ #define TIM_TIM1_ETR_ADC3_AWD3 (TIM1_OR1_ETR_ADC3_RMP_1 | TIM1_OR1_ETR_ADC3_RMP_0) /* !< TIM1_ETR is connected to ADC3 AWD3 */ #endif /* ADC3 */ #define TIM_TIM1_TI1_GPIO 0x00000000U /* !< TIM1 TI1 is connected to GPIO */ #define TIM_TIM1_TI1_COMP1 TIM1_OR1_TI1_RMP /* !< TIM1 TI1 is connected to COMP1 */ #define TIM_TIM1_ETR_GPIO 0x00000000U /* !< TIM1_ETR is connected to GPIO */ #define TIM_TIM1_ETR_COMP1 TIM1_OR2_ETRSEL_0 /* !< TIM1_ETR is connected to COMP1 output */ #if defined(COMP2) #define TIM_TIM1_ETR_COMP2 TIM1_OR2_ETRSEL_1 /* !< TIM1_ETR is connected to COMP2 output */ #endif /* COMP2 */ #if defined (USB_OTG_FS) #define TIM_TIM2_ITR1_TIM8_TRGO 0x00000000U /* !< TIM2_ITR1 is connected to TIM8_TRGO */ #define TIM_TIM2_ITR1_OTG_FS_SOF TIM2_OR1_ITR1_RMP /* !< TIM2_ITR1 is connected to OTG_FS SOF */ #else #if defined(STM32L471xx) #define TIM_TIM2_ITR1_TIM8_TRGO 0x00000000U /* !< TIM2_ITR1 is connected to TIM8_TRGO */ #define TIM_TIM2_ITR1_NONE TIM2_OR1_ITR1_RMP /* !< No internal trigger on TIM2_ITR1 */ #else #define TIM_TIM2_ITR1_NONE 0x00000000U /* !< No internal trigger on TIM2_ITR1 */ #define TIM_TIM2_ITR1_USB_SOF TIM2_OR1_ITR1_RMP /* !< TIM2_ITR1 is connected to USB SOF */ #endif /* STM32L471xx */ #endif /* USB_OTG_FS */ #define TIM_TIM2_ETR_GPIO 0x00000000U /* !< TIM2_ETR is connected to GPIO */ #define TIM_TIM2_ETR_LSE TIM2_OR1_ETR1_RMP /* !< TIM2_ETR is connected to LSE */ #define TIM_TIM2_ETR_COMP1 TIM2_OR2_ETRSEL_0 /* !< TIM2_ETR is connected to COMP1 output */ #if defined(COMP2) #define TIM_TIM2_ETR_COMP2 TIM2_OR2_ETRSEL_1 /* !< TIM2_ETR is connected to COMP2 output */ #endif /* COMP2 */ #define TIM_TIM2_TI4_GPIO 0x00000000U /* !< TIM2 TI4 is connected to GPIO */ #define TIM_TIM2_TI4_COMP1 TIM2_OR1_TI4_RMP_0 /* !< TIM2 TI4 is connected to COMP1 output */ #if defined(COMP2) #define TIM_TIM2_TI4_COMP2 TIM2_OR1_TI4_RMP_1 /* !< TIM2 TI4 is connected to COMP2 output */ #define TIM_TIM2_TI4_COMP1_COMP2 (TIM2_OR1_TI4_RMP_1| TIM2_OR1_TI4_RMP_0) /* !< TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output2 */ #endif /* COMP2 */ #if defined (TIM3) #define TIM_TIM3_TI1_GPIO 0x00000000U /* !< TIM3 TI1 is connected to GPIO */ #define TIM_TIM3_TI1_COMP1 TIM3_OR1_TI1_RMP_0 /* !< TIM3 TI1 is connected to COMP1 output */ #define TIM_TIM3_TI1_COMP2 TIM3_OR1_TI1_RMP_1 /* !< TIM3 TI1 is connected to COMP2 output */ #define TIM_TIM3_TI1_COMP1_COMP2 (TIM3_OR1_TI1_RMP_1 | TIM3_OR1_TI1_RMP_0) /* !< TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output2 */ #define TIM_TIM3_ETR_GPIO 0x00000000U /* !< TIM3_ETR is connected to GPIO */ #define TIM_TIM3_ETR_COMP1 TIM3_OR2_ETRSEL_0 /* !< TIM3_ETR is connected to COMP1 output */ #endif /* TIM3 */ #if defined (TIM8) #if defined(ADC2) && defined(ADC3) #define TIM_TIM8_ETR_ADC2_NONE 0x00000000U /* !< TIM8_ETR is not connected to any AWD (analog watchdog)*/ #define TIM_TIM8_ETR_ADC2_AWD1 TIM8_OR1_ETR_ADC2_RMP_0 /* !< TIM8_ETR is connected to ADC2 AWD1 */ #define TIM_TIM8_ETR_ADC2_AWD2 TIM8_OR1_ETR_ADC2_RMP_1 /* !< TIM8_ETR is connected to ADC2 AWD2 */ #define TIM_TIM8_ETR_ADC2_AWD3 (TIM8_OR1_ETR_ADC2_RMP_1 | TIM8_OR1_ETR_ADC2_RMP_0) /* !< TIM8_ETR is connected to ADC2 AWD3 */ #define TIM_TIM8_ETR_ADC3_NONE 0x00000000U /* !< TIM8_ETR is not connected to any AWD (analog watchdog)*/ #define TIM_TIM8_ETR_ADC3_AWD1 TIM8_OR1_ETR_ADC3_RMP_0 /* !< TIM8_ETR is connected to ADC3 AWD1 */ #define TIM_TIM8_ETR_ADC3_AWD2 TIM8_OR1_ETR_ADC3_RMP_1 /* !< TIM8_ETR is connected to ADC3 AWD2 */ #define TIM_TIM8_ETR_ADC3_AWD3 (TIM8_OR1_ETR_ADC3_RMP_1 | TIM8_OR1_ETR_ADC3_RMP_0) /* !< TIM8_ETR is connected to ADC3 AWD3 */ #endif /* ADC2 && ADC3 */ #define TIM_TIM8_TI1_GPIO 0x00000000U /* !< TIM8 TI1 is connected to GPIO */ #define TIM_TIM8_TI1_COMP2 TIM8_OR1_TI1_RMP /* !< TIM8 TI1 is connected to COMP1 */ #define TIM_TIM8_ETR_GPIO 0x00000000U /* !< TIM8_ETR is connected to GPIO */ #define TIM_TIM8_ETR_COMP1 TIM8_OR2_ETRSEL_0 /* !< TIM8_ETR is connected to COMP1 output */ #define TIM_TIM8_ETR_COMP2 TIM8_OR2_ETRSEL_1 /* !< TIM8_ETR is connected to COMP2 output */ #endif /* TIM8 */ #define TIM_TIM15_TI1_GPIO 0x00000000U /* !< TIM15 TI1 is connected to GPIO */ #define TIM_TIM15_TI1_LSE TIM15_OR1_TI1_RMP /* !< TIM15 TI1 is connected to LSE */ #define TIM_TIM15_ENCODERMODE_NONE 0x00000000U /* !< No redirection */ #define TIM_TIM15_ENCODERMODE_TIM2 TIM15_OR1_ENCODER_MODE_0 /* !< TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ #if defined (TIM3) #define TIM_TIM15_ENCODERMODE_TIM3 TIM15_OR1_ENCODER_MODE_1 /* !< TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ #endif /* TIM3 */ #if defined (TIM4) #define TIM_TIM15_ENCODERMODE_TIM4 (TIM15_OR1_ENCODER_MODE_1 | TIM15_OR1_ENCODER_MODE_0) /* !< TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ #endif /* TIM4 */ #define TIM_TIM16_TI1_GPIO 0x00000000U /* !< TIM16 TI1 is connected to GPIO */ #define TIM_TIM16_TI1_LSI TIM16_OR1_TI1_RMP_0 /* !< TIM16 TI1 is connected to LSI */ #define TIM_TIM16_TI1_LSE TIM16_OR1_TI1_RMP_1 /* !< TIM16 TI1 is connected to LSE */ #define TIM_TIM16_TI1_RTC (TIM16_OR1_TI1_RMP_1 | TIM16_OR1_TI1_RMP_0) /* !< TIM16 TI1 is connected to RTC wakeup interrupt */ #if defined (TIM16_OR1_TI1_RMP_2) #define TIM_TIM16_TI1_MSI TIM16_OR1_TI1_RMP_2 /* !< TIM16 TI1 is connected to MSI */ #define TIM_TIM16_TI1_HSE_32 (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_0) /* !< TIM16 TI1 is connected to HSE div 32 */ #define TIM_TIM16_TI1_MCO (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_1) /* !< TIM16 TI1 is connected to MCO */ #endif /* TIM16_OR1_TI1_RMP_2 */ #if defined (TIM17) #define TIM_TIM17_TI1_GPIO 0x00000000U /* !< TIM17 TI1 is connected to GPIO */ #define TIM_TIM17_TI1_MSI TIM17_OR1_TI1_RMP_0 /* !< TIM17 TI1 is connected to MSI */ #define TIM_TIM17_TI1_HSE_32 TIM17_OR1_TI1_RMP_1 /* !< TIM17 TI1 is connected to HSE div 32 */ #define TIM_TIM17_TI1_MCO (TIM17_OR1_TI1_RMP_1 | TIM17_OR1_TI1_RMP_0) /* !< TIM17 TI1 is connected to MCO */ #endif /* TIM17 */ /** * @} */ /** @defgroup TIMEx_Break_Input TIM Extended Break input * @{ */ #define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */ #define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */ /** * @} */ /** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source * @{ */ #define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /* !< An external source (GPIO) is connected to the BKIN pin */ #define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /* !< The COMP1 output is connected to the break input */ #define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /* !< The COMP2 output is connected to the break input */ #if defined (DFSDM1_Channel0) #define TIM_BREAKINPUTSOURCE_DFSDM1 0x00000008U /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */ #endif /* DFSDM1_Channel0 */ /** * @} */ /** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling * @{ */ #define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */ #define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */ /** * @} */ /** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity * @{ */ #define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */ #define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */ /** * @} */ /** * @} */ /* End of exported constants -------------------------------------------------*/ /* Exported macro ------------------------------------------------------------*/ /** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros * @{ */ /** * @} */ /* End of exported macro -----------------------------------------------------*/ /* Private macro -------------------------------------------------------------*/ /** @defgroup TIMEx_Private_Macros TIM Extended Private Macros * @{ */ #define IS_TIM_REMAP(__REMAP__) (((__REMAP__) <= (uint32_t)0x0001C01F)) #define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) #if defined (DFSDM1_Channel0) #define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM1)) #else #define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2)) #endif /* DFSDM1_Channel0 */ #define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) #define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) /** * @} */ /* End of private macro ------------------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions * @{ */ /** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions * @brief Timer Hall Sensor functions * @{ */ /* Timer Hall Sensor functions **********************************************/ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); /* Non-Blocking mode: Interrupt */ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); /* Non-Blocking mode: DMA */ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); /** * @} */ /** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions * @brief Timer Complementary Output Compare functions * @{ */ /* Timer Complementary Output Compare functions *****************************/ /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); /* Non-Blocking mode: Interrupt */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); /* Non-Blocking mode: DMA */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); /** * @} */ /** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions * @brief Timer Complementary PWM functions * @{ */ /* Timer Complementary PWM functions ****************************************/ /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); /* Non-Blocking mode: Interrupt */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); /* Non-Blocking mode: DMA */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); /** * @} */ /** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions * @brief Timer Complementary One Pulse functions * @{ */ /* Timer Complementary One Pulse functions **********************************/ /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); /* Non-Blocking mode: Interrupt */ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); /** * @} */ /** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions * @brief Peripheral Control functions * @{ */ /* Extended Control functions ************************************************/ HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef *sMasterConfig); HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); /** * @} */ /** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions * @brief Extended Callbacks functions * @{ */ /* Extended Callback **********************************************************/ void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim); /** * @} */ /** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions * @brief Extended Peripheral State functions * @{ */ /* Extended Peripheral State functions ***************************************/ HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); /** * @} */ /** * @} */ /* End of exported functions -------------------------------------------------*/ /* Private functions----------------------------------------------------------*/ /** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions * @{ */ void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); /** * @} */ /* End of private functions --------------------------------------------------*/ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* STM32L4xx_HAL_TIM_EX_H */