/** ****************************************************************************** * @file stm32l4xx_hal_pwr.h * @author MCD Application Team * @brief Header file of PWR HAL module. ****************************************************************************** * @attention * * Copyright (c) 2017 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32L4xx_HAL_PWR_H #define STM32L4xx_HAL_PWR_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32l4xx_hal_def.h" /** @addtogroup STM32L4xx_HAL_Driver * @{ */ /** @addtogroup PWR * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup PWR_Exported_Types PWR Exported Types * @{ */ /** * @brief PWR PVD configuration structure definition */ typedef struct { uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. This parameter can be a value of @ref PWR_PVD_detection_level. */ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. This parameter can be a value of @ref PWR_PVD_Mode. */ }PWR_PVDTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup PWR_Exported_Constants PWR Exported Constants * @{ */ /** @defgroup PWR_PVD_detection_level Programmable Voltage Detection levels * @{ */ #define PWR_PVDLEVEL_0 PWR_CR2_PLS_LEV0 /*!< PVD threshold around 2.0 V */ #define PWR_PVDLEVEL_1 PWR_CR2_PLS_LEV1 /*!< PVD threshold around 2.2 V */ #define PWR_PVDLEVEL_2 PWR_CR2_PLS_LEV2 /*!< PVD threshold around 2.4 V */ #define PWR_PVDLEVEL_3 PWR_CR2_PLS_LEV3 /*!< PVD threshold around 2.5 V */ #define PWR_PVDLEVEL_4 PWR_CR2_PLS_LEV4 /*!< PVD threshold around 2.6 V */ #define PWR_PVDLEVEL_5 PWR_CR2_PLS_LEV5 /*!< PVD threshold around 2.8 V */ #define PWR_PVDLEVEL_6 PWR_CR2_PLS_LEV6 /*!< PVD threshold around 2.9 V */ #define PWR_PVDLEVEL_7 PWR_CR2_PLS_LEV7 /*!< External input analog voltage (compared internally to VREFINT) */ /** * @} */ /** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode * @{ */ #define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< Basic mode is used */ #define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ #define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ #define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ #define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ #define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ #define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ /** * @} */ /** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR regulator mode * @{ */ #define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000) /*!< Regulator in main mode */ #define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPR /*!< Regulator in low-power mode */ /** * @} */ /** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry * @{ */ #define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Sleep mode */ #define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Sleep mode */ /** * @} */ /** @defgroup PWR_STOP_mode_entry PWR STOP mode entry * @{ */ #define PWR_STOPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Stop mode */ #define PWR_STOPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Stop mode */ /** * @} */ /** @defgroup PWR_PVD_EXTI_LINE PWR PVD external interrupt line * @{ */ #define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ /** * @} */ /** @defgroup PWR_PVD_EVENT_LINE PWR PVD event line * @{ */ #define PWR_EVENT_LINE_PVD ((uint32_t)0x00010000) /*!< Event line 16 Connected to the PVD Event Line */ /** * @} */ /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @defgroup PWR_Exported_Macros PWR Exported Macros * @{ */ /** @brief Check whether or not a specific PWR flag is set. * @param __FLAG__ specifies the flag to check. * This parameter can be one of the following values: * @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event * was received from the WKUP pin 1. * @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event * was received from the WKUP pin 2. * @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event * was received from the WKUP pin 3. * @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event * was received from the WKUP pin 4. * @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event * was received from the WKUP pin 5. * @arg @ref PWR_FLAG_SB StandBy Flag. Indicates that the system * entered StandBy mode. * @arg @ref PWR_FLAG_EXT_SMPS External SMPS Ready Flag. When available on device, indicates * that external switch can be closed to connect to the external SMPS, when the Range 2 * of internal regulator is ready. * @arg @ref PWR_FLAG_WUFI Wake-Up Flag Internal. Set when a wakeup is detected on * the internal wakeup line. * @arg @ref PWR_FLAG_REGLPS Low Power Regulator Started. Indicates whether or not the * low-power regulator is ready. * @arg @ref PWR_FLAG_REGLPF Low Power Regulator Flag. Indicates whether the * regulator is ready in main mode or is in low-power mode. * @arg @ref PWR_FLAG_VOSF Voltage Scaling Flag. Indicates whether the regulator is ready * in the selected voltage range or is still changing to the required voltage level. * @arg @ref PWR_FLAG_PVDO Power Voltage Detector Output. Indicates whether VDD voltage is * below or above the selected PVD threshold. * @arg @ref PWR_FLAG_PVMO1 Peripheral Voltage Monitoring Output 1. Indicates whether VDDUSB voltage is * is below or above PVM1 threshold (applicable when USB feature is supported). @if STM32L486xx * @arg @ref PWR_FLAG_PVMO2 Peripheral Voltage Monitoring Output 2. Indicates whether VDDIO2 voltage is * is below or above PVM2 threshold (applicable when VDDIO2 is present on device). @endif * @arg @ref PWR_FLAG_PVMO3 Peripheral Voltage Monitoring Output 3. Indicates whether VDDA voltage is * is below or above PVM3 threshold. * @arg @ref PWR_FLAG_PVMO4 Peripheral Voltage Monitoring Output 4. Indicates whether VDDA voltage is * is below or above PVM4 threshold. * * @retval The new state of __FLAG__ (TRUE or FALSE). */ #define __HAL_PWR_GET_FLAG(__FLAG__) ( ((((uint8_t)(__FLAG__)) >> 5U) == 1) ?\ (PWR->SR1 & (1U << ((__FLAG__) & 31U))) :\ (PWR->SR2 & (1U << ((__FLAG__) & 31U))) ) /** @brief Clear a specific PWR flag. * @param __FLAG__ specifies the flag to clear. * This parameter can be one of the following values: * @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event * was received from the WKUP pin 1. * @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event * was received from the WKUP pin 2. * @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event * was received from the WKUP pin 3. * @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event * was received from the WKUP pin 4. * @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event * was received from the WKUP pin 5. * @arg @ref PWR_FLAG_WU Encompasses all five Wake Up Flags. * @arg @ref PWR_FLAG_SB Standby Flag. Indicates that the system * entered Standby mode. * @retval None */ #define __HAL_PWR_CLEAR_FLAG(__FLAG__) ( (((uint8_t)(__FLAG__)) == PWR_FLAG_WU) ?\ (PWR->SCR = (__FLAG__)) :\ (PWR->SCR = (1U << ((__FLAG__) & 31U))) ) /** * @brief Enable the PVD Extended Interrupt Line. * @retval None */ #define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) /** * @brief Disable the PVD Extended Interrupt Line. * @retval None */ #define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) /** * @brief Enable the PVD Event Line. * @retval None */ #define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) /** * @brief Disable the PVD Event Line. * @retval None */ #define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) /** * @brief Enable the PVD Extended Interrupt Rising Trigger. * @retval None */ #define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) /** * @brief Disable the PVD Extended Interrupt Rising Trigger. * @retval None */ #define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) /** * @brief Enable the PVD Extended Interrupt Falling Trigger. * @retval None */ #define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) /** * @brief Disable the PVD Extended Interrupt Falling Trigger. * @retval None */ #define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) /** * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger. * @retval None */ #define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ do { \ __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ } while(0) /** * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. * @retval None */ #define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ do { \ __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ } while(0) /** * @brief Generate a Software interrupt on selected EXTI line. * @retval None */ #define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) /** * @brief Check whether or not the PVD EXTI interrupt flag is set. * @retval EXTI PVD Line Status. */ #define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR1 & PWR_EXTI_LINE_PVD) /** * @brief Clear the PVD EXTI interrupt flag. * @retval None */ #define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, PWR_EXTI_LINE_PVD) /** * @} */ /* Private macros --------------------------------------------------------*/ /** @addtogroup PWR_Private_Macros PWR Private Macros * @{ */ #define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) #define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_NORMAL) ||\ ((MODE) == PWR_PVD_MODE_IT_RISING) ||\ ((MODE) == PWR_PVD_MODE_IT_FALLING) ||\ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) ||\ ((MODE) == PWR_PVD_MODE_EVENT_RISING) ||\ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) ||\ ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING)) #define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) #define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) #define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE) ) /** * @} */ /* Include PWR HAL Extended module */ #include "stm32l4xx_hal_pwr_ex.h" /* Exported functions --------------------------------------------------------*/ /** @addtogroup PWR_Exported_Functions PWR Exported Functions * @{ */ /** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions * @{ */ /* Initialization and de-initialization functions *******************************/ void HAL_PWR_DeInit(void); void HAL_PWR_EnableBkUpAccess(void); void HAL_PWR_DisableBkUpAccess(void); /** * @} */ /** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions * @{ */ /* Peripheral Control functions ************************************************/ HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); void HAL_PWR_EnablePVD(void); void HAL_PWR_DisablePVD(void); /* WakeUp pins configuration functions ****************************************/ void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); /* Low Power modes configuration functions ************************************/ void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); void HAL_PWR_EnterSTANDBYMode(void); void HAL_PWR_EnableSleepOnExit(void); void HAL_PWR_DisableSleepOnExit(void); void HAL_PWR_EnableSEVOnPend(void); void HAL_PWR_DisableSEVOnPend(void); void HAL_PWR_PVDCallback(void); /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* STM32L4xx_HAL_PWR_H */